Micro-D Hermetic Micro-D Hermetic Connectors Rear Panel Mount With O-Ring 177-705H and 177-706H Flourosilicone O-Ring eliminates the cost of soldering or welding the connector to a bulkhead. Kovar® Shells and Contacts comply with applicable MILDTL-83513 requirements and are 100% intermateable with standard connectors. Solder Cup, PC Tail or Pre-Wired and Fully Potted Suitable for #26 gage wire or smaller, solder cup versions feature gold-plated contacts. Choose PC tails for attachment to flex circuits or rigid boards. Solder cup versions are also available pre-wired and potted. how to order solder cup and pc tail connectors Layout Number of Contacts Series 9 15 21 25 31 37 177-705H Micro-D Hermetic Socket Receptacle, Rear Panel Mount with O-Ring, Solder Cup or PC Tail Contact Type Termination Type S – Socket SS – Solder Cup SP – PC Tail Mounting Threads U – #4 - 40 UNC M – M3 Metric S SP U 177-706H 9 15 21 25 31 37 Contact Type Wire Gage (AWG) S – Socket 6 – #26 8 – #28 0 – #30 Wire Type K –M22759/11 600 Vrms Teflon (TFE) (Not Available in #30 AWG) J –M22759/33 600 Vrms Modified Cross-Linked Tefzel (ETFE) Wire Color Wire Length Inches 1–White 2–Yellow 5–Color-Coded Stripes Per Wire Length In Inches. “18” Specifies 18 Inches. 18 MIL-STD-681 (#26 gage only) © 2006 Glenair, Inc. 25 S F 6 K CAGE Code 06324/0CA77 G-7 K L M N 1 – 18 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E 7–Ten Color Repeat Sample Part Number 177-706H D J how to order PRE-WIRED connectors Layout C H 15 Series B G Sample Part Number 177-705H A E-Mail: [email protected] P Micro-D Hermetic Connectors Rear Panel Mount With O-Ring 177-705H and 177-706H A B C D E F TWO ROW .180 (4.57) MAX. 9-69 CONTACTS #2-56 THREADS 100 CONTACTS #4-40 THREADS THREE, FOUR ROW .260 (6.60) MAX. BLIND TAPPED MTNG HOLES #4-40 SOLDER CUP EPOXY .094 ± .005 (2.39 ± 0.13) G H WIRE LENGTH +1.0 (2.54)/-0.0 .500 (12.7) MAX. PRE-WIRED J .125 ± .015 (3.18 ± 0.38) .021/.018 (0.53/0.46) PC TAIL LK DIMENSIONS A Max. B C MAX. In. mm. Layout 9S 15S 21S 25S 31S 37S D E MAX. F Max. In . mm. G H Max. J K In. mm. L Max. In. mm. In. mm. ± .005 ± 0.13 In . mm. ± .003 ± 0.08 In. mm. In. mm. ± .004 ± 0.10 In. mm. In. mm. ± .004 ± 0.10 In. 1.488 1.638 1.788 1.888 2.038 2.188 .250 .250 .250 .250 .250 .250 37.80 41.61 45.42 47.96 51.76 55.57 © 2006 Glenair, Inc. 1.011 1.161 1.311 1.411 1.561 1.711 25.67 29.48 33.29 35.83 39.64 43.45 .728 .878 1.028 1.128 1.278 1.428 18.49 .565 14.35 22.30 .715 18.16 32.51 .865 21.97 28.65 .965 24.51 32.46 1.115 28.32 36.27 1.265 32.13 6.35 6.35 6.35 6.35 6.35 6.35 .675 .675 .675 .675 .675 .675 17.14 17.14 17.14 17.14 17.14 17.14 CAGE Code 06324/0CA77 .195 .195 .195 .195 .195 .195 4.95 4.95 4.95 4.95 4.95 4.95 .526 .526 .526 .526 .526 .526 13.36 13.36 13.36 13.36 13.36 13.36 1.254 1.414 1.564 1.664 1.814 1.984 31.85 36.91 39.72 42.26 46.07 50.39 .254 .254 .254 .254 .254 .254 6.45 6.45 6.45 6.45 6.45 6.45 .358 .358 .358 .358 .358 .358 mm. 9.09 9.09 9.09 9.09 9.09 9.09 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-8 E-Mail: [email protected] Micro-D Hermetic Connectors Rear Panel Mount With O-Ring 177-705H and 177-706H PANEL CUTOUT DIMENSIONS FOR 177-705 AND 177-706 A B C FULL RADIUS Ø .134 ± .004 (3.40 ± 0.10) 2 PLCS A Layout 9 15 21 25 31 37 B In. ± .003 mm. ± 0.08 In. ± .005 mm. ± 0.13 1.011 1.161 1.311 1.411 1.561 1.711 25.69 29.50 33.31 35.85 39.66 43.47 .731 .881 1.031 1.131 1.281 1.431 18.56 22.37 26.18 28.72 32.53 36.34 © 2006 Glenair, Inc. G C CAGE Code 06324/0CA77 In. + .005/ -0.0 .252 .252 .252 .252 .252 .252 mm. + 0.13/ -0.0 6.40 6.40 6.40 6.40 6.40 6.40 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-9 E-Mail: [email protected]