Test Probes and Adapters 180-073 (07 Receptacle) Fiber Optic Test Adapter With Special Insert Arrangement MIL-DTL-38999 Series III 180-073 NF 07-17-8 P A Alternate Keying Position A,B,C,D & E Per MIL-DTL-38999, Series III (Omit for Normal) Plug Adapter (Omit, Universal) Product Series Basic Number Finish Symbol (See Table II) P = Pin Insert S = Socket Insert (With Alignment Sleeves) 07 = Receptacle Adapter Insert Arrangement Per MIL-STD-1560, Table I Shell Size (Table I) A Thread Table I Pin Insert 1.500 (38.1) Max. Socket Insert C Dia. Typ. 1.750 (44.5) Max. 07 RECEPTACLE ASSEMBLY APPLICATION NOTES 1. Assembly identified with manufacturer’s name and P/N, Space Permitting. 2. For Fiber Optic Test Probe Assembly See Glenair Drawing ABC54705 3. Material/ Finish: - Barrel/ Shell- Al Alloy/ See Table II - Insert, Coupling Nut- Hi- Grade Engineering Thermoplastic/ N.A. - Alignment Sleeve- Zirconia Ceramic/ N.A. - Retaining Ring- Stainless Steel/ N.A. - Retaining Clips- Beryllium Copper/ N.A. - Lock Nut- Al Alloy/ Black Anodize. 4. Metric dimensions (mm) are indicated in parentheses. © 2006 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] L-18 www.glenair.com Test Probes and Adapters 180-073 (07 Receptacle) Fiber Optic Test Adapter With Special Insert Arrangement MIL-DTL-38999 Series III FRONT FACE OF PIN AND SOCKET INSULATORS SHOWN, REAR SURFACE OPPOSITE 13-13 PIN INSERT 25-37A PIN INSERT 23-66 PIN INSERT 21-27 PIN INSERT A U 64 66 B A 13-13 SOCKET INSERT A 59 26 21 24 27 B 3 4 19 1 25 20 15 21 6 27 26 8 9 10 14 13 12 23 22 7 24 3 36 11 Z K d G D W X F J e n K C c L Y H S E H N q k Y m P a T g v f r Z G 14 m a b E 25-37B SOCKET INSERT U h k p M J A B 13 12 n F C v g q R X r L T D W h c 2 11 B 25-37A SOCKET INSERT 1 25 24 23 22 27 26 46 45 21 44 28 47 56 29 43 20 5 48 55 49 54 57 62 42 19 6 30 61 58 53 50 41 18 60 59 7 31 A 52 40 17 8 32 51 B D 39 16 9 33 34 C 38 15 35 10 37 4 17 16 5 P 65 23-66 SOCKET INSERT 18 f e N 21-27 SOCKET INSERT 2 S 25-37B PIN INSERT p R d b M TABLE I: SHELL SIZE AND INSERT ARRANGEMENTS Shell Size & Insert Arrangement Dash No. Shell Size Code Ref. A Thread 0.1P-0.3L-TS-2 B Dia Max C Dia Max 13-13 C .875 (22.2) 1.141 (29.0) .875 (22.2) 21-27 G 1.375 (34.9) 1.625 (41.3) 1.375 (34.9) 23-66* H 1.500 (38.1) 1.750 (44.5) 1.500 (38.1) 25-37A** J 1.625 (41.3) 1.875 (47.6) 1.625 (41.3) 25-37B** J 1.625 (41.3) 1.875 (47.6) 1.625 (41.3) *Shell Size 23 is made of 300 Series Stainless Steel. **25-37 Insert Cavity spacing too close to Probe using one Adapter, two Adapters (25-37A and 25-37B) are therefore required to probe this Special Connector Insert Pattern. TABLE II: FINISH © 2006 Glenair, Inc. SYM MATERIAL B Aluminum Cadmium Plate/Olive Drab FINISH M Aluminum Electroless Nickel NF Aluminum Cadmium/Olive Drab over Electroless Nickel (500-Hr. Salt Spray) N Aluminum Cadmium Plate/Olive Drab over Nickel Plate Z1 Stainless Steel Passivate CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] L-19 www.glenair.com