400-015 TAG Ring Backshell 40 ® with Strain Relief Self-Locking Rotatable Coupling - Standard Profile 400 F J 015 M 16 06 L CONNECTOR DESIGNATORS Product Series Strain Relief Style (F, G, L) A-F-H-L-S Connector Designator Cable Entry (Table IV, V) SELF-LOCKING ROTATABLE COUPLING Angle and Profile H = 45 J = 90 See page 400-16 for straight Shell Size (Table I) Finish (Table II) Basic Part No. A Thread (Table I) F H (Table III) (Table III) G (Table III) E Typ. (Table I) Ground Spring 1.00 (25.4) Max AntiRotation Device (Typ.) Shown with Style G Nut J (Table III) Cable Entry Shown with Style L Strain Relief K (Table IV) L (Table V) STYLE 2 (See Note 1) STYLE F Light Duty (Table V) .416 (10.5) Approx. Cable Range © 2005 Glenair, Inc. L STYLE G Light Duty (Table IV) STYLE L Light Duty (Table V) .072 (1.8) Approx. Cable Entry K CAGE Code 06324 .850 (21.6) Approx. Cable Range L Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 40 - Page 18 400-015 TAG Ring Backshell 40 ® with Strain Relief Self-Locking Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 Dash No. 02 03 04 05 06 07 08 09 10 F Max .795 (20.2) .820 (20.8) .844 (21.4) .861 (21.9) .888 (22.6) .904 (23.0) .929 (23.6) .956 (24.3) .979 (24.9) TABLE IV: CABLE ENTRY K Cable Entry Max Max .545 (13.8) .250 (6.4) .670 (17.0) .375 (9.5) .795 (20.2) .500 (12.7) .920 (23.4) .625 (15.9) 1.045 (26.5) .750 (19.1) 1.170 (29.7) .875 (22.2) 1.295 (32.9) 1.000 (25.4) 1.420 (36.1) 1.125 (28.6) 1.670 (42.4) 1.250 (31.8) G Max 1.510 (38.4) 1.540 (39.1) 1.560 (39.6) 1.590 (40.4) 1.610 (40.9) 1.620 (41.1) 1.640 (41.7) 1.680 (42.7) 1.710 (43.4) Dash No. 02 03 04 05 06 07 08 09 10 H Max .906 (23.0) .966 (24.5) 1.026 (26.1) 1.076 (27.3) 1.136 (28.9) 1.176 (29.9) 1.236 (31.4) 1.296 (32.9) 1.356 (34.4) J Max 1.620 (41.1) 1.680 (42.7) 1.740 (44.2) 1.810 (46.0) 1.870 (47.5) 1.890 (48.0) 1.950 (49.5) 2.030 (51.6) 2.100 (53.3) TABLE V: CABLE ENTRY L Cable Max Min .968 (24.6) .125 (3.2) 1.046 (26.6) .250 (6.4) 1.156 (29.4) .250 (6.4) 1.218 (30.9) .375 (9.5) 1.343 (34.1) .500 (12.7) 1.468 (37.3) .625 (15.9) 1.593 (40.5) .625 (15.9) 1.718 (43.6) .750 (19.1) 1.843 (46.8) .875 (22.2) Range Max .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 40 - Page 19