310 310-034 O-Ring Sealed Shrink Boot Adapter Direct Coupling - Standard Profile CONNECTOR DESIGNATORS * 310 D S 034 M 16 T A-B -C-D-E-F G-H-J-K-L-S Product Series Shrink Boot (Table III Omit for None) Connector Designator * Conn. Desig. B See Note 4 Shell Size Finish (Table II) Angle and Profile H = 45° J = 90° S = Straight DIRECT COUPLING Basic Part No. O-Ring A Thread (Table I) K (Table TABLE II - STANDARD FINISHES V) B (Table I) Cable Entry L (Table V) GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Back Cover for Complete Finish Information and Additional Finish Options J (Table III) J E (Table III) (Table IV) G (Table IV) F (Table IV) B (Table I) B (Table I) H (Table IV) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 310 - Page 4 310 310-034 O-Ring Sealed Shrink Boot Adapter Direct Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F J-H-L-S D-B-G-K C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) Shell Size 08 10/11 12/13 14/15 16/17 18 20 22 24 28 32 36 40 Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28 32 TABLE IV: DIMENSIONS E F G Max Max Max .639 (16.2) .810 (20.6) .750 (19.1) .664 (16.9) .840 (21.3) .810 (20.6) .688 (17.5) .860 (21.8) .870 (22.1) .705 (17.9) .890 (22.6) .920 (23.4) .732 (18.6) .910 (23.1) .980 (24.9) .748 (19.0) .920 (23.4) 1.020 (25.9) .773 (19.6) .940 (23.9) 1.080 (27.4) .800 (20.3) .980 (24.9) 1.140 (29.0) .823 (20.9) 1.010 (25.7) 1.200 (30.5) 1.041 (26.4) 1.180 (30.0) 1.480 (37.6) 1.092 (27.7) 1.370 (34.8) 1.610 (40.9) H Max .920 (23.4) .980 (24.9) 1.040 (26.4) 1.110 (28.2) 1.170 (29.7) 1.190 (30.2) 1.250 (31.8) 1.330 (33.8) 1.400 (35.6) 1.640 (41.7) 1.880 (47.8) TABLE V: CABLE ENTRY AND SHRINK BOOT L Cable Entry Max Min K Max Shrink Boot * .688 (17.5) .250 (6.4) .500 (12.7) 202K121-25-0 .803 (20.4) .355 (9.0) .500 (12.7) 202K132-25-0 .938 (23.8) .491 (12.5) .500 (12.7) 202K132-25-0 .565 (14.4) .500 (12.7) 1.063 (27.0) 202K142-25-0 .690 (17.5) .500 (12.7) 1.238 (31.4) 202K153-25-0 .769 (19.5) .500 (12.7) 1.310 (33.3) 202K153-25-0 .844 (21.4) .500 (12.7) 1.436 (36.5) 202K163-25-0 .500 (12.7) 1.560 (39.6) 1.019 (25.9) 202K163-25-0 .500 (12.7) 1.686 (42.8) 1.134 (28.8) 202K174-25-0 .687 (17.4) 2.062 (52.4) 1.369 (34.8) 202K174-25-0 .687 (17.4) 2.312 (58.7) 1.615 (41.0) 202K185-25-0 .687 (17.4) 2.562 (65.1) 1.830 (46.5) 202K185-25-0 .687 (17.4) 2.812 (71.4) 2.045 (51.9) 202K185-25-0 * Raychem Shrink Boot Supplied with "T" Option (see Part Number Development) 1. Cable Entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 2. See Shrink Boot Reference Information (page 40). 3. Metric dimensions (mm) are indicated in parentheses. 4. When using Connector Designator B refer to pages 18 and 19 for part number development. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 310 - Page 5 REV. 12-AUG-2008