MIL-PRF 24758A 759-861 Connector to Connector Factory Terminated Conduit Assembly 759-861 A 16 H 15 - 20 - 50.5 Length (in inches) IE: 50.5 = 50 1/2 inches Product Series Basic No. Conduit Dash No. (Table III) ‘A’ End Connector Designator A,C,D,F,G,H & W (Table I & 2) ‘B’ End Shell Size ‘B’ End Connector Designator A,C,D,F,G,H & W (Table I & 2) ‘A’ End Shell Size Length see P/N development 1.50 Max ‘A’ end thread I.D Table II (M24758-(PRF Size) with Glenair “BlueJacket” ‘B’ end thread TABLE III CONDUIT DASH NO MIL PRF SIZE B MIN. 08 A 0.245 (6.22) 12 J 0.370 (9.40) 16 B 0.495 (12.57) 20 K 0.620 (15.75) 24 C 0.745 (18.92) 32 D 0.995 (25.27) B MIL-C-22992 SER. R 40 E 1.245 (31.62) C MIL-C-26482 SER. I MIL-DTL-38999, SER. I TABLE II CONN. CODE SPECIFICATION MIL-DTL-5015 (MS34**), A MIL-C-26482 SER. II, MIL-DTL83723 SER. I, III. 48 F 1.495 (37.97) D 64 G 1.995 (50.67) F MIL-DTL-38999 SER. III, IV GLENAIR SER. 22 (GEO MARINE) 80 H 2.495 (63.37) H 96 L 2.995 (76.07) W MIL-C-28840 APPLICATION NOTES 1. Assembly identified with manufacurer’s code identification number (Glenair, part number and classification code 490). 2. Length tolerance is 0-24” = +1/4”, for longer lengths is +1% of length. 3. Glenair 600 series backshell assembly tools are recommended for assembly installation. © 2007 Glenair, Inc. 4. Material / Finish: Adapter, ferrule & coupling nut, AISI 316 stainless steel / electroless nickel, matte finish. 5. Metric dimensions (mm) are indicated in parentheses. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] 50 www.glenair.com MIL-PRF 24758A 759-861 Connector to Connector Factory Terminated Conduit Assembly TABLE I CONNECTOR DESIGNATOR A C D F 08 08 (9) G H W 7/16-28 UNEF 09 A M12 X 1 - 6H 08 1/2-20 UNF 10 10 (11) 9/16-24 UNEF 11 B 10 M15 X 1 - 6H 10 12 12 (13) 12 11 A 14 M18 X 1 - 6H 12 14 (15) 14 13 B 16 M22 X 1 - 6H 14 16 (17) 16 18 15C 18 M25 X 1 - 6H 16 18 (19) M28 X 1 - 6H 17 D 1 1/8-18 UNEF 18 20 20 20 (21) M31 X 1 - 6H 19 E 1 1/4-18 UNEF 20 22 22 22 (23) 23 H M34 X 1 - 6H 1 3/8-18UNEF 22 24 24 (25) 23 F 1 3/8-16 UN 1 7/16-18 UNEF 25 J M37 X 1 - 6H 24 25 G 24 1 1/2-16 UN 1 9/16-18 UNEF 1 5/8-18 UNEF 28 1 3/4-18 UNS 28 29 H 1 7/8-16 UN 32 33 J 2 1/16-16 UNS 32 2-18 UNS 36 2 1/4-16 UN 36 2 5/16-16 UNS 40 2 1/2-16 UN 40 © 2007 Glenair, Inc. 1 1/4-16 UN 1 5/16-18 UNEF 22 24 1 1/8-16 UN 1 3/16-18 UNEF 21 G 20 1-20 UNEF 1 1/16-18 UNEF 19 F 18 7/8-20 UNEF 15/16-20 UNEF 17 E 16 3/4-20 UNEF 13/16-20 UNEF 15 D 14 5/8-24 UNEF 11/16-24 UNEF 13 C 12 A THREAD REF 2 5/8-16 UN 44 2 3/4-16 UN 48 3-16 UN CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] 51 www.glenair.com