Series 74 Convoluted Tubing 712-127 - Types B, D & E Straight, 45° & 90° Non-Environmental User-Installable Connector Fitting for Series 74 Helical Convoluted Tubing TYPES B, D, & E 712 F S 127 M 16 20 - 6 1 B Product Series Conduit Type B, D, or E Style 1 or 2 Conn. Designator A, F, H, L, or S (Pages F-3 to F-5) Length in 1/2 inch (12.7) increments (Example: 6 = 3.0 inches (76.2)) Angular Function: K = 45° L = 90° S = Straight Dash No. (Table III) Shell Size (Table I) Basic No. LENGTH ± .060 (1.52) Finish (Table II) A THREAD (PAGE F-17) LENGTH ± .060 (1.52) SHIELD TUBING C DIA (Page F-17) TUBING I.D. STRAIGHT STYLE 2 .88 (22.4) MAX J DIA E 45° G F H STYLE 2 (45° & 90°) © 2003 Glenair, Inc. 90° 45° CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] D-18 Series 74 Convoluted Tubing 712-127 - Types B, D & E Straight, 45° & 90° Non-Environmental User-Installable Connector Fitting for Series 74 Helical Convoluted Tubing SHELL SIZE A,F,L,S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 -32 -36 -- E MAX .639 (16.2) .664 (16.9) .688 (17.5) .705 (17.9) .732 (18.6) .748 (19.0) .773 (19.6) .800 (20.3) .823 (20.9) 1.041 (26.4) 1.092 (27.7) 1.138 (28.9) TABLE I F MAX .950 (24.1) .980 (24.9) 1.000 (25.4) 1.030 (26.2) 1.050 (26.7) 1.060 (26.9) 1.080 (27.4) 1.120 (28.4) 1.150 (29.2) 1.320 (33.5) 1.360 (34.5) 1.410 (35.8) TABLE II SYMBOL FINISH B Olive Drab over Cadmium Plate J Gold Iridite over Cadmium Plate over Nickel M Electroless Nickel N Olive Drab over Cadmium Plate over Nickel NC Zinc-Cobalt, Olive Drab NF Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) T Bright Dip Cadmium Plate over Nickel DASH NO. 06 09 10 12 14 16 20 24 28 32 40 48 56 64 G MAX .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.020 (25.9) 1.080 (27.4) 1.140 (29.0) 1.200 (30.5) 1.480 (37.6) 1.610 (40.9) 1.720 (43.7) H MAX 1.060 (26.9) 1.120 (28.4) 1.180 (30.0) 1.250 (31.8) 1.310 (33.3) 1.330 (33.8) 1.390 (35.3) 1.470 (37.3) 1.540 (39.1) 1.780 (45.2) 1.870 (47.5) 1.980 (50.3) TABLE III TUBING I.D. MIN MAX .181 (4.6) .188 (4.8) .273 (6.9) .281 (7.1) .306 (7.8) .312 (7.9) .364 (9.2) .375 (9.5) .427 (10.8) .437 (11.1) .485 (12.3) .500 (12.7) .608 (15.4) .625 (15.9) .730 (18.5) .750 (19.1) .860 (21.8) .875 (22.2) .975 (24.8) 1.000 (25.4) 1.210 (30.7) 1.250 (31.8) 1.437 (36.5) 1.500 (38.1) 1.688 (42.9) 1.750 (44.5) 1.937 (49.2) 2.000 (50.8) J MAX .910 (23.1) 1.000 (25.4) 1.032 (26.2) 1.095 (27.8) 1.167 (29.6) 1.220 (31.0) 1.345 (34.2) 1.470 (37.3) 1.595 (40.5) 1.720 (43.7) 1.970 (50.0) 2.220 (56.4) 2.470 (62.7) 2.720 (69.1) NOTES: 1. Metric dimensions (mm) are in parentheses. 2. Tubing shown for reference only. 3. When tubing I.D. max exceeds inside diameter of connector shell, style 2 may be supplied. Refer to pages F-15 and F-16. © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] D-19