Composite Backshells 380-100 Composite Cone and Ring Style EMI/RFI Shield Termination Backshell with Self-Locking Rotatable Coupling and Qwik Clamp Angle and Profile S - Straight W - 90° Elbow T - 45° Elbow CONNECTOR DESIGNATOR: A B A MIL-DTL-5015, -26482 Series II, and -83723 Series I and III F L H G U MIL-DTL-38999 Series I, II Product Series 380 - EMI/RFI Non Environmental Backshells with Strain Relief MIL-DTL-38999 Series 1.5 (JN1003) MIL-DTL-38999 Series III and IV 380 MIL-DTL-28840 DG123 and DG123A H Finish Symbol (See Table III) Basic Part Number S 100 Connector Designator A, F, L, H, G and U SELF-LOCKING Cable Entry (See Table IV) XM 19 28 Connector Shell Size (See Table II) ROTATABLE COUPLING STANDARD PROFILE F E C Anti-Decoupling Device 1.380 (35.1) J G Cable Range D H J TABLE II: CONNECTOR SHELL SIZE E F Shell Size For Connector Designator A F/L H G U 08 08 09 – – 10 10 11 – 08 12 12 13 11 10 14 14 15 13 12 16 16 17 15 14 18 18 19 17 16 20 20 21 19 18 22 22 23 – 20 24 24 25 23 22 28 – – 25 24 ±.06 .69 .75 .81 .88 .94 .97 1.06 1.13 1.19 1.34 E (1.5) (17.5) (19.1) (20.6) (22.4) (23.9) (24.6) (26.9) (28.7) (30.2) (34.0) ±.09 .88 1.00 1.13 1.31 1.38 1.44 1.63 1.75 1.88 2.13 F (2.3) (22.4) (25.4) (28.7) (33.3) (35.1) (36.6) (41.4) (44.5) (47.8) (54.1) ±.09 1.06 1.13 1.19 1.25 1.31 1.34 1.44 1.50 1.56 1.66 Cable Range G (2.3) (26.9) (28.7) (30.2) (31.8) (33.3) (34.0) (36.6) (38.1) (39.6) (42.2) Max Entry Dash No.** 08 12 16 20 24 28 32 36 40 44 H US PATENT 5211576 **Consult factory for additional entry sizes available. See introduction for additional connector front-end details. G © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-48 Composite Backshells 380-100 Composite Cone and Ring Style EMI/RFI Shield Termination Backshell with Self-Locking Rotatable Coupling and Qwik Clamp Anti-Decoupling Device K A L J B Cable Range TABLE II: CONNECTOR SHELL SIZE (CONT.) Shell Size For Connector Designator Max Entry K L H A & F/L Dash No. * ±.06 (1.5) ±.06 (1.5) 09 08 08 .72 (18.3) .88 (22.4) 11 10 12 .75 (19.1) .94 (23.9) 13 12 16 .75 (19.1) 1.00 (25.4) 15 14 20 .76 (19.3) 1.03 (26.2) 17 16 24 .78 (19.8) 1.06 (26.9) 19 18 28 .79 (20.1) 1.07 (27.2) 21 20 32 .82 (20.8) 1.09 (27.7) 23 22 36 .86 (21.8) 1.14 (29.0) 25 24 40 .92 (23.4) 1.17 (29.7) H C NOTES 1. Coupling nut supplied unplated. 2. See Table I in Intro for front-end dimensional details. 3. Metric dimensions (mm) are in parentheses and are for reference only * Consult factory for additional entry sizes available. Entry Code 08 12 16 20 24 28 32 36 40 44 TABLE IV: CABLE ENTRY Cable Range H J (Max) (Max) Minimum Maximum .72 (18.3) .87 (22.1) .10 (2.5) .25 (6.4) .91 (23.1) 1.01 (25.7) .20 (5.1) .38 (9.7) 1.09 (27.7) 1.11 (28.2) .33 (8.4) .50 (12.7) 1.22 (31.0) 1.11 (28.2) .45 (11.4) .63 (15.9) 1.34 (34.0) 1.11 (28.2) .52 (13.2) .75 (19.1) 1.53 (38.9) 1.26 (32.0) .64 (16.3) .88 (22.2) 1.72 (43.7) 1.41 (35.8) .77 (19.6) 1.00 (25.4) 1.85 (47.0) 1.41 (35.8) .86 (21.8) 1.13 (28.6) 1.97 (50.0) 1.41 (35.8) .98 (24.9) 1.25 (31.8) 2.09 (53.1) 1.53 (38.9) 1.13 (28.6) 1.38 (34.9) © 2009 Glenair, Inc. CAGE Code 06324 TABLE III: FINISH Symbol Finish Description XM 2000 Hour Corrosion Resistant Electroless Nickel XMT 2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour GreyTM XW 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-49 D E F G