38 380-009 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Rotatable Coupling - Low Profile 380 F S 009 M 16 05 F 6 CONNECTOR DESIGNATORS Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series A-F-H-L-S Connector Designator ROTATABLE COUPLING Strain Relief Style (F, G) Angle and Profile A = 90 B = 45 S = Straight TYPE D INDIVIDUAL OR OVERALL SHIELD TERMINATION Cable Entry (Table IV, V) Shell Size (Table I) Finish (Table II) Basic Part No. Length – .060 (1.52) Minimum Order Length 2.0 Inch (See Note 4) Length – .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) A Thread (Table I) C Typ. (Table I) E (Table III) STYLE 2 (STRAIGHT See Note 1) G (Table III) F (Table III) .88 (22.4) Max H (Table III) STYLE 2 (45° & 90° See Note 1) STYLE F Light Duty (Table IV) STYLE G Light Duty (Table V) .416 (10.5) Max Cable Range © 2005 Glenair, Inc. J .072 (1.8) Max Cable Entry CAGE Code 06324 K Now Available with the NESTOR Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. Add “-445” to Specify This AS85049 Style “N” Coupling Interface. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 38 - Page 50 www.glenair.com 38 380-009 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 Dash No. 02 03 04 05 06 07 08 10 E Max .457 (11.6) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) F Max 1.500 (38.1) 1.510 (38.4) 1.580 (40.1) 1.660 (42.2) 1.770 (45.0) 1.960 (49.8) 1.960 (49.8) 2.110 (53.6) 2.110 (53.6) 2.160 (54.9) 2.260 (57.4) 2.360 (59.9) G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) H Max 1.445 (36.7) 1.565 (39.8) 1.585 (40.3) 1.655 (42.0) 1.725 (43.8) 1.915 (48.6) 1.915 (48.6) 2.025 (51.4) 2.025 (51.4) 2.195 (55.8) 2.445 (62.1) 2.445 (62.1) TABLE IV: CABLE ENTRY Cable Range J Max Max Min .250 (6.4) .968 (24.6) .125 (3.2) .375 (9.5) 1.046 (26.6) .250 (6.4) .500 (12.7) 1.156 (29.4) .312 (7.9) .625 (15.9) 1.218 (30.9) .437 (11.1) .750 (19.1) 1.343 (34.1) .562 (14.3) .875 (22.2) 1.468 (37.3) .687 (17.4) 1.000 (25.4) 1.593 (40.5) .812 (20.6) 1.250 (31.8) 1.843 (46.8) 1.062 (27.0) Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE II: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options TABLE V: CABLE ENTRY K Cable Entry Max Max .125 (3.2) .656 (16.7) .781 (19.8) .250 (6.4) .375 (9.5) .906 (23.0) 1.031 (26.2) .500 (12.7) 1.156 (29.4) .625 (15.9) .750 (19.1) 1.281 (32.5) 1.406 (35.7) .875 (22.2) 1.531 (38.9) 1.000 (25.4) 1.125 (28.6) 1.656 (42.1) 1.781 (45.2) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 38 - Page 51 www.glenair.com