Strain Reliefs M28840/3 Strain Relief Glenair Connector Designator G M28840/3 J W MIL-C-28840 A Thread .228 (5.79) Ref. Material and Finish Designator W = Aluminum, Cadmium Olive Drab over Electroless Nickel Basic Part No. Designator E Wire Holes (3 Equally Spaced) C G Cable Entry Telescoping Screw and Lockwasher F TABLE I Shell Desig- Size nator Ref. A 11 B 13 C 15 D 17 E 19 F 23 G 25 H 29 J 33 A Thread Class 2B .750 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.125 - 18 UNEF 1.250 - 18 UNEF 1.438 - 18 UNEF 1.562 - 18 UNEF 1.875 - 16 UN 2.062 - 16 UNS C Max 1.028 (26.1) 1.141 (29.0) 1.263 (32.1) 1.387 (35.2) 1.513 (38.4) 1.703 (43.3) 1.825 (46.4) 2.143 (54.4) 2.329 (59.2) E Max 1.650 (41.9) 1.650 (41.9) 1.765 (44.8) 1.874 (47.6) 1.918 (48.7) 1.962 (49.8) 2.006 (51.0) 2.301 (58.4) 2.389 (60.7) F Max .903 (22.9) .977 (24.8) 1.151 (29.2) 1.281 (32.5) 1.406 (35.7) 1.576 (40.0) 1.666 (42.3) 2.046 (52.0) 2.209 (56.1) G Max .929 (23.6) .929 (23.6) 1.056 (26.8) 1.233 (31.3) 1.296 (32.9) 1.358 (34.5) 1.420 (36.1) 1.634 (41.5) 1.859 (47.2) Cable Entry Min Max .177 (4.5) .286 (7.3) .177 (4.5) .286 (7.3) .250 (6.4) .416 (10.6) .291 (7.4) .476 (12.1) .348 (8.8) .626 (15.9) .429 (10.9) .831 (21.1) .523 (13.3) .956 (24.3) .643 (16.3) 1.081 (27.5) .704 (17.9) 1.187 (30.1) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable Entry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 62-7