Cable Connectors Series 79 Micro-Crimp Section D: Cable Connectors, Crimp Termination Cable Receptacles With Pin Contacts, Crimp Termination, 790-024P Rugged, lightweight 790-024P connectors feature machined aluminum shells, fluorosilicone face seals and wire grommets for environmental protection. Contacts are rear-release snap-in crimp type. Connectors are supplied with crimp contacts packaged separately. Size #23 signal pins accept up to #22 AWG wire. Size #16 contacts accept #16-18 AWG wire. Size #12 contacts accept #12-14 AWG wire. Size 12 and 16 cavities also accept coaxial contacts purchased separately. Connector shell features a groove for attachment of a low-profile EMI backshell adapter 799-015, ordered separately. A B How To Order Sample Part Number 790-024P C-13 Base Part Number Shell Size Insert Arr. 790-024P See Table 1 for Available Insert Arrangements Electroless Nickel . To order a connector without size #16 or #12 power pins, substitute “W” instead of “P” in the insert arrangement. Nickel-PTFE Cable Receptacle with Pin Contacts Example: 36P2 is supplied with 2 power pins. 36W2 is supplied less the power pins. See Section B for coaxial contacts purchased separately. P Shell Finish Hardware Option D M general purpose applications MT N P Thru-Hole No Hardware 1000 Hour Grey™ maximum corrosion protection and durability (non-reflective grey) Female Jackpost tactical applications (non-reflective black) L Low-Profile Captivated Jackscrew, Hex Head K Slot-Head Extended Jackscrew Additional shell finishes are listed on page C-9. Specifications T Slot-Head Extended Captivated Screwlock Materials and Finishes Shell Contacts Insulators Retention Clips Interfacial Seal, Grommet Hardware Aluminum alloy Copper alloy, 50 microinches gold plated Liquid crystal polymer (LCP) Beryllium copper alloy Flourosilicone rubber 300 series stainless steel Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-1 Rev. 04-July-2009 E-Mail: [email protected] H INDEX #23 5 AMPS, #16 13 A., #12 23 A. #23 500 VAC RMS, #12 and #16 1800 VAC RMS 5000 megohms minimum -65° C. to +150° C. 300 g. 37 g. F G S © 2009 Glenair, Inc. E ZNU Zinc-Nickel with Black Chromate Low-Profile Captivated Screwlock, Hex Head Current Rating Dielectric Withstanding Voltage Insulation Resistance Operating Temperature Shock Vibration C M Cable Connectors Series 79 Micro-Crimp Section D: Cable Connectors, Crimp Termination Table 1 Contact Arrangements A Layout A-5 Contact Quantity #23 #16 #12 5 B-2P2 B C D 9 C-13 13 D-15 15 D-3P3 E 5 2 E-11P2 9 2 E-19 19 E-7P3 4 .190 (4.83) MAX 3 N No Mating Hardware Connector is supplied with thru-holes. Shell sizes H and L are .148" (3.76) diameter, other shell sizes are .092" (2.34) diameter. Accepts standard Micro-D M83513 hardware. 23 5 33 H-10P4 6 SHELL Table 2 Hardware Option F-15P2 13 2 G-33 PIN CONTACT GROOVE FOR EMI ADAPTER 3 F-5P5 RETAINING CLIP INTERFACIAL SEAL FRONT INSULATOR D-7P2 F-23 REAR INSULATOR GROMMET POTTING WIRE (REF.) 2 B-9 Face View Cross-Sectional View of 790-024P P Jackposts Connector is supplied with removable jackposts. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread. Stainless steel. Conforms to M83513/05. .155 (3.94) MAX 4 .925 (23.5) MAX H-29P7 22 7 F H-36P2 34 2 H-54P2 52 2 H-5P5 G H-66 L Hex Head Jackscrews 5 66 Connector is supplied with stainless steel nonremovable low profile jackscrews. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread. K Extended Jackscrews Connector is supplied with stainless steel slot head non-removable jackscrews. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread. J-17P4 13 4 J-25P2 23 2 J-33 H 33 J-7P7 .925 (23.50) MAX .290 (7.37) MAX 7 K-27P4 23 4 INDEX S K-35P2 33 2 K-43 K-9P9 Hex Head Screwlocks 43 9 L-6P6 © 2009 Glenair, Inc. 6 Connector is supplied with stainless steel nonremovable low profile screwlocks. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread. Screwlocks allow the connector to be mated before the screws are fastened. T Extended Screwlocks Connector is supplied with stainless steel nonremovable slot head screwlocks. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread. Screwlocks allow the connector to be mated before the screws are fastened. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-2 Rev. 04-July-2009 E-Mail: [email protected] Cable Connectors Series 79 Micro-Crimp Section D: Cable Connectors, Crimp Termination 790-024P Dimensions A 1.435 (1.80) MAX A MAX B BASIC C MAX 1.215 (30.86) BASIC 1.079 (27.41) MAX .395 (10.03) MAX .308 (7.82) MAX .096/.088 (2.44/2.24) DIA 2 PLACES .195 ± .003 (4.95 ± 0.08) .195 ± .003 (4.95 ± 0.08) GROOVE FOR ATTACHMENT OF EMI ADAPTER 799-015 .760 (19.30) MAX .093 ± .005 (2.36 ± 0.13) .760 (19.30) MAX .093 ± .005 (2.36 ± 0.13) B .096/.088 (2.44/2.24) DIA 2 PLACES C 1.055 (26.80) MAX SHELL SIZE G D MAX D E MAX F BASIC G MAX SHELL SIZES A, B, C, D, E, F, J, K .410 (10.41) MAX .195 ± .003 (4.95 ± 0.08) .152/.145 (3.86/3.68) DIA 2 PLACES .760 (19.30) MAX .093 ± .005 (2.36 ± 0.13) E F H MAX SHELL SIZE H AND L G 790-024P Dimensions A Max. In. mm. .785 .935 1.085 1.185 1.335 1.485 — 1.845 2.240 — © 2009 Glenair, Inc. 19.94 23.75 27.65 30.10 33.91 37.72 — 46.86 56.90 — B Basic In . mm. .565 .715 .865 .965 1.115 1.265 — 1.615 2.015 — 14.35 18.16 21.97 24.51 28.32 32.13 — 41.02 51.18 — C Max. In. mm. .400 .551 .701 .801 .951 1.101 — 1.460 1.860 — 10.16 14.00 17.81 20.35 24.16 27.96 — 37.08 47.24 — D Max. In. mm. .390 .540 .690 .790 .940 1.090 — 1.450 1.840 — 9.91 13.72 17.53 20.07 23.88 27.69 — 36.83 46.74 — E Max. In. mm. F Basic In. mm. G Max. In. mm. H Max. In. mm. — — — — — — — — — — — — 2.175 55.25 — — — — 2.420 61.47 — — — — — — — — — — — — 1.800 45.72 — — — — 2.036 51.71 — — — — — — — — — — — — 1.450 36.83 — — — — 1.686 42.82 — — — — — — — — — — — — 1.440 36.58 — — — — 1.675 42.55 Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-3 Rev. 04-July-2009 E-Mail: [email protected] H INDEX Shell Size A B C D E F H J K L