KBL005G~KBL10G Voltage 50V ~ 1000V, 4.0Amp Glass Passivated Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES KBL Surge overload rating – 125 Amperes peak Ideal for printed circuit board Plastic material has underwriters laboratory flammability classification 94V-0 Mounting position: Any REF. A B C D E Millimeter Min. Max. 18.5 19.5 15.2 16.3 6.0 6.5 13.9 14.9 (4.0) x 45° REF. F G H I Millimeter Min. Max. 4.6 5.6 1.8 2.2 19.0 1.2 TYP. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Part Number Parameter Symbol Maximum Recurrent Peak Reverse Voltage Unit KBL 005G KBL 01G KBL 02G KBL 04G KBL 06G KBL 08G KBL 10G VRRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified 1 Output Current at TA=50°C Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load Maximum Forward Voltage Drop Per Bridge Element @ 4A Peak Maximum Reverse Current at Rated DC Blocking Voltage I(AV) 4 A IFSM 125 A VF 1.1 V 10 µA 1 mA -55~150 °C TA=25°C IR TA=150°C Operating & Storage Temperature Range TJ,TSTG Note: 1. Mounting condition, 0.5” lead length maximum http://www.SeCoSGmbH.com/ 26-Oct-2011 Rev. A Any changes of specification will not be informed individually. Page 1 of 2 KBL005G~KBL10G Elektronische Bauelemente Voltage 50V ~ 1000V, 4.0Amp Glass Passivated Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 26-Oct-2011 Rev. A Any changes of specification will not be informed individually. Page 2 of 2