TACT SWITCHES SERIES KAP SWITCHES PIANO DIP SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHES NAVIGATION SWITCHES SPECIFICATIONS Piano style Top side off or top side on option Tape seal option APPLICATIONS/MARKETS Garage door openers Test & instrumentation Telecommunications Controller application Switch: 25mA @ 24V DC Carry: 100mA @ 50V DC Insulation Resistance: 100 MΩ Min. @ 500V DC Contact Resistance: Initial: 50 mΩ typical @ 2-4V DC @ 100mA After Life: 100mΩ typical @ 2-4 DC @ 100mA Operating Life: 2,000 make-and-break cycles, each circuit Operating Force: 1000 gf max. Travel (Actuator): 2.0 mm typical Dielectric Strength: 500V RMS min. @ sea level between adjacent terminals Temperature Range: Operating/Storage: -40° C to 85° C Vibration: To MIL-STD-202F, Method 201 A Shock: To MIL-STD-202F, Method 213B, Condition A SNAP-ACTION SWITCHES Housing and Actuator: Glass filled polyester (PBT) UL94-V0 Contacts: Phosphor Bronze with gold plate over nickel plate Terminals: Phosphor Bronze with gold plate over nickel plate Tape: Mylar DIP SWITCHES PACKAGING Switches are supplied in standard IC tubes with all poles in the “OFF” position. ▲ ▲ HOW TO ORDER SERIES MODEL NO. TERMINATION CIRCUIT P = Piano Type 1 = PC Pin 1 = SPST ROTARY SWITCHES DETECTOR SWITCHES KA ▲ ▲ CAP OPTIONS NO. OF POSITIONS ACTUATOR SEAL R = Recessed Act., Top Side OFF (None) = Std. Unsealed KA ▲ 218 Wave: 500 F (260 C) for 5s max; Hand: 30W soldering iron @ 608 F (320 C) for 2s typical. Keep all switches in the “OFF” position during soldering and cleaning process. MATERIALS ▲ KEYLOCK SWITCHES SPST, 2 thru 12 positions (except position 11) Contact Rating: Soldering Recommendations: SLIDE SWITCHES ROCKER SWITCHES FEATURES & BENEFITS Switch Function: Example Ordering Number 02 03 04 05 06 07 08 09 10 12 E = Extended Act., Top Side OFF T = Top Tape Sealed V = Recessed Act., Top Side ON W = Extended Act., Top Side ON KA_ P_ 1_ 1_ 04_ R_ T Specifications subject to change without notice. Phone: 800-867-2717 Fax: 763-531-8235 TACT SWITCHES TERMINATION OPTIONS KAP TOGGLE SWITCHES P.C. MOUNTING PUSHBUTTON SWITCHES NAVIGATION SWITCHES 1 PC PIN SCHEMATIC Positions: 2 3 4 5 6 7 8 9 10 12 “A” 6.64 9.18 11.72 14.26 16.8 19.34 21.88 24.42 26.96 32.04 Dimension: (.261) (.361) (.461) (.561) (.661) (.761) (.861) (.961) (1.061) (1.261) “B” 2.54 5.08 7.62 10.16 12.7 15.24 17.78 20.32 22.86 27.94 Dimension: (.100) (.200) (.300) (.400) (.500) (.600) (.700) (.800) (.900) (1.100) SNAP-ACTION SWITCHES ACTUATOR OPTIONS SLIDE SWITCHES ROCKER SWITCHES Position 1 denotes Pin No. 1. R RECESSED TOPSIDE “OFF” V RECESSED TOPSIDE “ON” W EXTENDED TOPSIDE “ON” ROTARY SWITCHES KEYLOCK SWITCHES “OFF” E EXTENDED TOPSIDE DIP SWITCHES NUMBER OF POSITIONS SEAL OPTIONS CAP OPTIONS DETECTOR SWITCHES T Top Tape Sealed www.e-switch.com info @ e-switch.com 219