Shrink Boot Adapters AS85049/69 Shrink Boot Adapters Glenair Connector Designator H M85049/69-11 A D MIL-DTL-38999 Series III & IV, EN3645 Basic Part No. Drain Hole Option (Omit for none) Shell Size Finish A = Anodize Black G A Thread Drain Holes 4 Places Optional E C F TABLE I Shell Size 9 11 13 15 17 19 21 23 25 A Thread Class 2B M12 X 1 - 6H M15 X 1 - 6H M18 X 1 - 6H M22 X 1 - 6H M25 X 1 - 6H M28 X 1 - 6H M31 X 1 - 6H M34 X 1 - 6H M37 X 1 - 6H C Dia Max .600 (15.24) .717 (18.21) .834 (21.18) .990 (25.14) 1.107 (28.12) 1.224 (31.09) 1.341 (34.06) 1.453 (36.90) 1.567 (39.80) E Dia Min .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .812 (20.6) .938 (23.8) 1.062 (27.0) 1.188 (30.2) F Dia Max .533 (13.5) .605 (15.4) .774 (19.7) .838 (21.3) .963 (24.5) 1.042 (26.5) 1.217 (30.9) 1.355 (34.4) 1.443 (36.7) G Max .710 (18.0) .710 (18.0) .710 (18.0) .710 (18.0) .710 (18.0) .710 (18.0) .710 (18.0) .710 (18.0) .710 (18.0) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 31-7