Protective Covers MS25042 and MS25043 Protective Covers MS25042-20D A Basic Part No. MS25042 = Plug Cover MS25043 = Receptacle Cover MIL-DTL-5015 Finish A = Black Anodize Shell Size MS25042-20D Basic Part No. MS25042 = Plug Cover MS25043 = Receptacle Cover Prior Revision Available Shell Size Finish is Cadmium Olive Drab J G E Thread Gasket Attachment L Dia Attachment M Dia F H K K E Thread MS25042 Plug Cover MS25043 Receptacle Cover TABLE I Shell Size 8D 10D 12D 14D 16D 18D 20D 22D 24D 28D 32D 36D 40D 44D 48D E Thread 1/2 - 28 UNEF 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 1/8 - 18 UNEF 1 1/4 - 18 UNEF 1 3/8 - 18 UNEF 1 1/2 - 18 UNEF 1 3/4 - 18 UNS 2 - 18 UNS 2 1/4 - 16 UN 2 1/2 - 16 UN 2 3/4 - 16 UN 3 - 16 UN F Dia Max .562 (14.3) .687 (17.4) .812 (20.6) .937 (23.8) 1.062 (27.0) 1.187 (30.1) 1.312 (33.3) 1.437 (36.5) 1.562 (39.7) 1.812 (46.0) 2.062 (52.4) 2.312 (58.7) 2.562 (65.1) 2.812 (71.4) 3.062 (77.8) G Max .656 (16.7) .656 (16.7) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) .844 (21.4) H Max .688 (17.5) .815 (20.7) 1.000 (25.4) 1.125 (28.6) 1.188 (30.2) 1.344 (34.1) 1.469 (37.3) 1.594 (40.5) 1.719 (43.7) 1.969 (50.0) 2.219 (56.4) 2.469 (62.7) 2.719 (69.1) 2.969 (75.4) 3.188 (81.0) J Max .469 (11.9) .469 (11.9) .469 (11.9) .469 (11.9) .469 (11.9) .469 (11.9) .469 (11.9) .469 (11.9) .469 (11.9) .531 (13.5) .531 (13.5) .531 (13.5) .531 (13.5) .531 (13.5) .531 (13.5) K Attachment Length 4.00 (101.6) 4.00 (101.6) 4.50 (114.3) 4.50 (114.3) 4.50 (114.3) 4.50 (114.3) 5.00 (127.0) 5.00 (127.0) 5.50 (139.7) 7.75 (196.9) 7.75 (196.9) 7.75 (196.9) 7.75 (196.9) 7.75 (196.9) 7.75 (196.9) L Dia Min .151 (3.8) .151 (3.8) .151 (3.8) .151 (3.8) .151 (3.8) .151 (3.8) .182 (4.6) .182 (4.6) .182 (4.6) .182 (4.6) .213 (5.4) .213 (5.4) .213 (5.4) .213 (5.4) .213 (5.4) M Dia Min .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .135 (3.4) .166 (4.2) .166 (4.2) .182 (4.6) .182 (4.6) .182 (4.6) .182 (4.6) .182 (4.6) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. © 2005 Glenair, Inc. Printed in U.S.A. CAGE Code 06324 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 66-4 66 O Protective Covers.p65 4 1/3/2006, 12:49 PM