MN102H730F , MN102H73G , MN102H73K Type MN102H730F MN102H73G (under development) MN102H73K (under development) ROM (×× 8-bit) External 128 K 256 K RAM (×× 8-bit) 10 K 10 K 12 K Package TQFP128-P-1414B *Lead-free TQFP128-P-1414A *Lead-free Minimum Instruction Execution Time With main clock operated Interrupts • RST pin • Watchdog • NMI pin • Timer counter 0 to 9 underflow • Timer counter 10 to 14 underflow • Timer counter 10 to 14 compare capture A • Timer counter 10 to 14 compare capture B • ATC ch.0 to 1 transfer finish • ETC ch.0 to 1 transfer finish • External 0 to 7 • Serial ch.0 to 4 transmission • Serial ch.0 to 4 reception • A/D conversion finish Timer Counter Timer counter 0 : 8-bit × 1 Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 8; TM0IO pin; system clock (BOSC) Interrupt source ················ underflow of timer counter 0 58 ns (at 3.0 V to 3.6 V, 34 MHz) Timer counter 1 : 8-bit × 1 Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 8; TM1IO pin; timer counter 0 output Interrupt source ················ underflow of timer counter 1 Timer counter 2 : 8-bit × 1 Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 8; TM2IO pin; timer counter 1 output Interrupt source ················ underflow of timer counter 2 Timer counter 3 : 8-bit × 1 Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 8; TM3IO pin; timer counter 2 output Interrupt source ················ underflow of timer counter 3 Timer counter 4 : 8-bit × 1 Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 9; TM4IO pin; system clock (BOSC) Interrupt source ················ underflow of timer counter 4 Timer counter 5 : 8-bit × 1 Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 9; TM5IO pin; timer counter 4 output Interrupt source ················ underflow of timer counter 5 Timer counter 6 : 8-bit × 1 Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 9; TM6IO pin; timer counter 5 output Interrupt source ················ underflow of timer counter 6 Timer counter 7 : 8-bit × 1 Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 9; TM7IO pin; timer counter 6 output Interrupt source ················ underflow of timer counter 7 Timer counter 8 : 8-bit × 1 Clock source ····················· 1/2 of system clock (BOSC) frequency; system clock (BOSC); 1/4 of system clock (XI) frequency; TM8IO pin Interrupt source ················ underflow of timer counter 8 1 MAE00010EEM MN102H730F , MN102H73G , MN102H73K Timer Counter (Continue) Timer counter 9 : 8-bit × 1 Clock source ····················· 1/2 of system clock (BOSC) frequency; 1/64 of system clock (BOSC) frequency; TM9IO pin; timer counter 8 output Interrupt source ················ underflow of timer counter 9 Timer counter 10 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ····················· underflow of timer counter 8, 9; TM10IOB pin; 1/2 of system clock (BOSC) frequency; 2-phase encode of TM10IOA pin/TM10IOB pin (1 ×, 4 ×) Interrupt source ················ underflow of timer counter 10; timer counter 10 compare capture A; timer counter 10 compare capture B Timer counter 11 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ····················· underflow of timer counter 8, 9; TM11IOB pin; 1/2 of system clock (BOSC) frequency; 2-phase encode of TM11IOA pin/TM11IOB pin (1 ×, 4 ×) Interrupt source ················ underflow of timer counter 11; timer counter 11 compare capture A; timer counter 11 compare capture B Timer counter 12 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ····················· underflow of timer counter 8, 9; TM12IOB pin; 1/2 of system clock (BOSC) frequency; 2-phase encode of TM12IOA pin/TM12IOB pin (1 ×, 4 ×) Interrupt source ················ underflow of timer counter 12; timer counter 12 compare capture A; timer counter 12 compare capture B Timer counter 13 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ····················· underflow of timer counter 8, 9; TM13IOB pin; 1/2 of system clock (BOSC) frequency; 2-phase encode of TM13IOA pin/TM13IOB pin (1 ×, 4 ×) Interrupt source ················ underflow of timer counter 13; timer counter 13 compare capture A; timer counter 13 compare capture B Timer counter 14 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ····················· underflow of timer counter 8, 9; TM14IOB pin; 1/2 of system clock (BOSC) frequency; 2-phase encode of TM14IOA pin/TM14IOB pin (1 ×, 4 ×) Interrupt source ················ underflow of timer counter 14; timer counter 14 compare capture A; timer counter 14 compare capture B Serial 0, 1 : 8-bit × 1 (transfer direction of MSB / LSB selectable, transmission / reception of 7, 8-bit length) Clock source ····················· 1/8 of timer counter 6 underflow frequency; 1/8, 1/2 of timer counter 0 underflow frequency; external pin Serial Interface Serial 2, 3 : 8-bit × 1 (transfer direction of MSB / LSB selectable, transmission / reception of 7, 8-bit length) Clock source ····················· 1/8 of timer counter 2 underflow frequency; 1/8, 1/2 of timer counter 4 underflow frequency; external pin UART × 4 (common use with serial 0 to 3) I2C × 2 (common use with serial 1,3; single master) Multiply-and-Accumulate 16-bit sign × 16-bit sign + 40-bit sign I/O Pins 104 I/O • Common use : 59 (use of full address, address data separate 16-bit mode) • Common use : 76 (use of address 16-bit, address data separate 8-bit mode) A/D Inputs 10-bit × 12-ch. (with S/H) D/A Outputs 8-bit × 4-ch. PWM 16-bit × 5-ch. (timer counter 10 to 14) ICR 16-bit × 5-ch. (timer counter 10 to 14) OCR 16-bit × 5-ch. (timer counter 10 to 14) Notes Address / data separate bus interface; 8 / 16-bit bus width selectable; SRAM interface See the next page for electrical characteristics, pin assignment and support tool. MAE00010EEM 2 Electrical Characteristics Supply current Limit Parameter Symbol Condition Unit min typ max VI = VDD or VSS, output open Operating supply current IDDopr 60+10α* mA 70 µA 30+10α* mA f = 34 MHz , VDD = 3.3 V Supply current at STOP Pin with pull-up resistor is open IDDS all other input pins and Hi-Z state input/output pins are simultaneously applied VDD or VSS level Supply current at HALT IDDH f = 34 MHz , VDD = 3.3 V, output open (Ta = −40°C to +85°C , VDD = AVDD = 3.3 V , VSS = AVSS = 0 V) * ”α” depends on products . MN102H73G/73K/730F α = 0 MN102HF73G α = 1 MN102HF73K α = 2 3 MAE00010EEM MN102H730F , MN102H73G , MN102H73K 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 RE, P52 WEH,P51 WEL,P50 PC7,BRACK PC6,BREQ P97,DAC3 P96,DAC2 P95,DAC1 P94,DAC0 AVDD VREFH P93,AN11 P92,AN10 P91,AN09 P90,AN08 PD5,TM5IO PD4,TM4IO P87,AN07 P86,AN06 P85,AN05 P84,AN04 P83,AN03 P82,AN02 P81,AN01 P80,AN00 VREFL AVSS VSS VDD SBT3,PB5 SBO3,PB4 SBI3,PB3 Pin Assignment 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 155 126 127 128 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 MN102H730F MN102H73G MN102H73K PB2,SBT2,TM12IC PB1,SBO2,TM11IC PB0,SBI2,TM10IC *PA5,SBT1 *PA4,SBO1 PA3,SBI1 PA2,SBT0 PA1,SBO0 PA0,SBI0 P75,TM12IOB P74,TM14IC P73,TM11IOB,STOP P72,TM14IOB P77,TM14IOA VDD PD3,TM3IO,DMAREQ0 PD2,TM2IO,DMAACK0 P71,TM13IC,WDOUT P70,TM13IOB WAIT,P67,IRQ7 P66,IRQ6 P65,TM12IOA,IRQ5 P64,TM11IOA,IRQ4 P63,TM10IOB,IRQ3 P62,TM10IOA,IRQ2 P61,TM3IO,IRQ1 P60,IRQ0 P76,TM13IOA PC0,TM9IO RST NMI BOSC CS0,P46 CS1,P47 D00,P00 D01,P01 D02,P02 D03,P03 VDD VSS D04,P04 D05,P05 D06,P06 D07,P07 P10,D08 P11,D09 P12,D10 DMAACK1,PD0,TM0IO DMAREQ1,PD1,TM1IO P13,D11 P14,D12 P15,D13 P16,D14 P17,D15 PC1, WORD VDD MODE PC3,TM2IO XI XO VDD OSCI OSCO VSS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 CS2,P53 VDD VSS BSTRE,P54 WR,P55 CS3,P56 A00,P20 A01,P21 A02,P22 A03,P23 A04,P24 A05,P25 A06,P26 A07,P27 A08,P30 TM6IO,PD6 TM7IO,PD7 A09,P31 A10,P32 A11,P33 A12,P34 A13,P35 VDD TM8IO,PC4 A14,P36 A15,P37 A16,P40 A17,P41 A18,P42 A19,P43 A20,P44 A21,P45 TQFP128-P-1414A *Lead-free TQFP128-P-1414B *Lead-free * Use 4.7 kΩ to 10 kΩ. Support Tool In-circuit Emulator PX-ICE102H73-128P1414 Flash Memory Built-in Type Type MN102HF73G, MN102HF73K ROM (× 8-bit) 128 K / 256 K RAM (× 8-bit) 10 K / 12 K Minimum instruction execution time 58 ns (at 3.0 V to 3.6 V, 34 MHz) Package TQFP128-P-1414B *Lead-free MAE00010EEM 4 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this book and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this book is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this book. (4) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which moisture-proof packaging is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. If you have any inquiries or questions about this book or our semiconductor products, please contact one of our sales offices listed on the back or semiconductor company’s sales department. Windows is a registered trademark of Microsoft Corporation. MS-DOS is a registered trademark of Microsoft Corporation. Sun and Solaris are registered trademarks of Sun Microsystems, Inc. PC-9801 is a registered trademark of NEC. PC/AT is a registered trademark of International Business Machines Corporation. TRON is an abbreviation of “The Real-time Operating system Nucleus.” ITRON is an abbreviation of “Industrial TRON.” µ ITRON is an abbreviation of “Micro Industrial TRON.” TRON, ITRON, and µ ITRON do not refer to any specific product or products. Other company names and product names are registered trademarks.