MURATA 7BB-35-3

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Piezoelectric Sound
Components
Cat.No.P37E-24
P37E.pdf
Feb.1,2012
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
EU RoHS Compliant
s
s
s
All the products in this catalog comply with EU RoHS.
EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment."
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
P37E.pdf
Feb.1,2012
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
CONTENTS
2
Application Matrix
4
2
3
4
5
6
7
8
Feb.1,2012
1
PIEZORINGERr and "PIEZORINGER" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.
Part Numbering
1
P37E.pdf
Piezoelectric Diaphragms
5
External Drive Type
5
Self Drive Type
6
Piezoelectric Diaphragms Notice
7
Piezoelectric Sounders External Drive Pin Type
8
Piezoelectric Sounders (External Drive Pin Type) Circuit/Notice
13
Piezoelectric Sounders External Drive Pin Type Taping
14
Piezoelectric Sounders (External Drive Pin Type Taping) Circuit/Notice
16
Piezoelectric Sounders External Drive Lead Wire Type
17
Piezoelectric Sounders (External Drive Lead Wire Type) Circuit/Notice
19
Piezoelectric Sounders External Drive SMD Type
20
Piezoelectric Sounders (External Drive SMD Type) Circuit/Notice
22
Piezoelectric Ringers (PIEZORINGERr)
23
Pin Type
23
Lead Wire Type
23
Piezoelectric Ringers (PIEZORINGERr) Notice
25
Piezoelectric Sounders Self Drive Pin Type
26
Piezoelectric Sounders (Self Drive) Notice
27
Piezoelectric Buzzers Pin Type
28
Piezoelectric Buzzers Notice
29
Piezoelectric Sound Components Notice
30
Package
31
2
3
4
5
6
7
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
o Part Numbering
Piezoelectric Diaphragms
(Part Number)
7
N
B
q w e
-31R2
DM
-1R5
L
r
t
y
u i o
10
qProduct ID
yResonant Frequency Type
Product ID
7
Code
Resonant Frequency (kHz)
-1R5
A hyphen (-) and three-digit alphanumerics
express resonant frequency. A decimal point is
expressed by the capital letter "R."
Ceramic Material
wMaterial
Code
Metal Plate Material
B
Brass
N
Nickel Alloy
S
SUS
eProduct
Code
Product
B
Piezoelectric Diaphragms
rMetal Plate Diameter
Code
-31R2
Metal Plate Diameter
A hyphen (-) plus four-digit alphanumerics
express metal plate outer dimensions. A
decimal point is expressed by the capital letter
"R."
If there is no decimal point, the decimal point code is omitted.
uWith Feedback Electrode
Code
C
With Feedback Electrode
e
Without Feedback Electrode
iProduct Specification
Code
Product Specification
L
With lead (available for RoHS)
e
No lead (omitted)
oIndividual Specification Code
Code
If there is no decimal point, the decimal point code is omitted.
10
tForm of Piezoelectric Style
Code
Form of Piezoelectric Style
DM
Two digits express the shape of ceramics.
For an Ag electrode, this digit remains blank; the corresponding code is
omitted.
2
With Feedback Electrode
Individual Specification Code
These digits express a lead length, lead
number, and the presence/absence of a
connector.
If the product has no individual specification, the corresponding code is
omitted.
P37E.pdf
Feb.1,2012
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Piezoelectric Sounders/Piezoelectric Buzzers/Piezoelectric Ringers (PIEZORINGERr)
(Part Number)
PK
M
13
P
YH
40
00
P
-A0
q
w
e r t
y
u
i
o
!0
E
qProduct ID
uOscillating Frequency Type
Product ID
PK
Code
Oscillating Frequency Type
40
Expressed resonant frequency by two-digit
alphanumerics. The unit is in 100 hertz (Hz).
In case of 4kHz (4000Hz), expressed as "40."
Piezoelectric Sound Components
wProduct
Code
Product
M
Sounder, Ringer
B
Buzzer
iIndividual Specification Code
Code
00
eOuter Dimensions
Individual Specification Code
Two digits express custom specification in
characteristics.
Expressed by two figures in mm.
Ex.)
Code
Outer Dimensions
13
ø12.6mm
oSpecial Quality Guarantee
rDrive
Code
Drive
E
External-Drive
S
Self-Drive
P
Pin Type
Lead Wire Type
Post Plated Terminal
Y
Blank
Code
Outer Electrode Style
W
Special Quality Guarantee
P
!0Packaging
tOuter Electrode Style
Code
Code
Packaging
-B0
Bulk
-A0
Radial Taping
Radial taping is not available for all types.
Please contact us.
yStructure
Code
Structure
Tp
Standing Type
Pp
Flat Type Auto-assemble
Yp
Flat Type/Available for Taping
Cp
Flat Type/Semi-auto-assemble
p
Exclude above mentioned
p signifies specification of the outer electrode.
SMD Piezoelectric Sounder
(Part Number)
PK LCS 1212 E 40 01 -R1
q
w
e
r t
y
u
tOscillating Frequency Type
qProduct ID
Product ID
PK
Code
Oscillating Frequency Type
40
Expressed resonant frequency by two-digit
alphanumerics. The unit is in 100 hertz (Hz.)
4kHz (4000Hz) is denoted as "40."
Piezoelectric Sound Components
wProduct
Code
Product
LCS
SMD Sounder
yIndividual Specification Code
Code
Individual Specification Code
01
Two digits express specific specification
in characteristics.
eDimensions
Code
Outer Dimensions
1212
p12mm
uPackaging
rDrive
Code
Drive
E
External Drive
Code
Packaging
-R1
Plastic taping
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Part Number
Medical Fire/
Digital
Phone Watch Clock Equip- Gas
Camera
ment Alarm
o
o
o
o
o
o
o
7BB-20-6
o
o
7BB-20-6L0
o
o
o
External Drive Type
o
o
o
o
o
o
o
o
o
o
o
o
7BB-27-4L0
o
o
o
o
o
7BB-35-3
o
o
o
o
7BB-35-3L0
o
o
o
o
7BB-41-2
o
7BB-41-2L0
o
o
Fan
Cluster
Heater
o
o
o
A/C
o
7BB-27-4
o
7BB-20-6C
o
o
o
7BB-20-6CL0
o
o
o
7BB-27-4C
o
o
o
o
7BB-27-4CL0
o
o
o
o
7BB-35-3C
o
o
o
7BB-35-3CL0
o
o
o
7BB-41-2C
o
7BB-41-2CL0
o
o
7SB-34R7-3C
External Drive Type
o
o
7NB-31R2-1
Self Drive Type
Piezoelectric Diaphragm
MicroBar
NoteDVDwave
Code Printer PC
Player
Oven
PDA
Scanner
o
7BB-15-6
Piezoelectric Sounder
Toy
o
o
7BB-12-9
7BB-20-3
PKM13EPYH4000-A0
o
o
o
o
o
o
o
o
o
o
o
o
PKM13EPYH4002-B0
o
o
o
o
o
o
o
o
o
o
o
o
o
PKM17EPP-2002-B0
o
o
o
o
o
o
o
o
o
o
o
PKM17EPPH4001-B0
o
o
o
o
o
o
o
o
o
o
o
PKM17EWH2001
o
o
o
o
o
o
o
o
o
PKM17EWH4000
o
o
o
o
o
o
o
o
o
o
o
o
o
o
PKM22EPPH2001-B0
o
o
o
o
o
o
o
o
o
o
PKM22EPPH4001-B0
o
o
o
o
o
o
o
o
o
o
PKM22EPPH4005-B0
o
o
o
o
o
o
o
o
o
PKM22EPPH4007-B0
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
PKM22EPH2001
o
PKM22EPTH2001-B0
PKLCS1212E2400-R1
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Self
Drive
Type
PKLCS1212E40A1-R1
PKM24SPH3805
Piezoelectric PKB24SPCH3601-B0
Buzzer
o
o
o
PKM33EPH1201C
o
Piezoelectric PKM34EWH1101C
Ringer
PKM34EWH1201C
o
PKM44EWH1001C
o
o
o
o
o
o
o
o
o
There are various applications besides those listed in the above table, including:
Alarm, Laundry Machine, Bath, Intercom, Chime, Back Buzzer, ME Instruments, Measuring Instruments, Vending Machine, Calculator, Automobile,
Communication Radio, Hemadynamometer, Thermometer, Facsimile, Audio Timer, Automatic Controlling Devices.
4
o
o
PKLCS1212E24A0-R1
PKLCS1212E4001-R1
Feb.1,2012
Application Matrix
Application Matrix
Application
P37E.pdf
o
o
o
o
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Piezoelectric Sound Components
1
Piezoelectric Diaphragms
c Features
1. Clear sound
2. Ultra thin and lightweight
3. No contacts; therefore, noiseless and highly reliable
4. Low power consumption for voltage type
øD øa
Red
øb
Black
c Applications
Clocks/Calculators/Digital camera/Various alarms
(Burglar alarms, etc.)
t
T
External Drive Type
Part Number
Resonant
Resonant Capacitance Plate Size Element Size Electrode Size Thickness Plate Thickness
dia. D
dia. a
dia. b
T
t
Frequency Impedance
(nF)
(mm)
(mm)
(mm)
(mm)
(mm)
(kHz)
(ohm)
7BB-12-9
9.0 ±1.0kHz 1000 max.
8.0 ±30%
[1kHz]
12.0
9.0
8.0
0.22
0.10
Brass
7BB-15-6
6.0 ±1.0kHz
800 max.
10.0 ±30%
[1kHz]
15.0
10.0
9.0
0.22
0.10
Brass
7BB-20-3
3.6 ±0.6kHz
500 max.
20.0 ±30%
[1kHz]
20.0
14.0
12.8
0.22
0.10
Brass
7BB-20-6
6.3 ±0.6kHz
350 max.
10.0 ±30%
[1kHz]
20.0
14.0
12.8
0.42
0.20
Brass
7BB-20-6L0
6.3 ±0.6kHz 1000 max.
10.0 ±30%
[1kHz]
20.0
14.0
12.8
0.42
0.20
Brass
(with Lead Wire:
AWG32 Length 50mm)
7BB-27-4
4.6 ±0.5kHz
200 max.
20.0 ±30%
[1kHz]
27.0
19.7
18.2
0.54
0.30
Brass
7BB-27-4L0
4.6 ±0.5kHz
300 max.
20.0 ±30%
[1kHz]
27.0
19.7
18.2
0.54
0.30
Brass
(with Lead Wire:
AWG32 Length 50mm)
7BB-35-3
2.8 ±0.5kHz
200 max.
30.0 ±30%
[1kHz]
35.0
25.0
23.0
0.53
0.30
Brass
7BB-35-3L0
2.8 ±0.5kHz
200 max.
30.0 ±30%
[1kHz]
35.0
25.0
23.0
0.53
0.30
Brass
(with Lead Wire:
AWG32 Length 50mm)
7BB-41-2
2.2 ±0.3kHz
250 max.
30.0 ±30%
[1kHz]
41.0
25.0
23.0
0.63
0.40
Brass
7BB-41-2L0
2.2 ±0.3kHz
300 max.
30.0 ±30%
[1kHz]
41.0
25.0
23.0
0.63
0.40
Brass
(with Lead Wire:
AWG32 Length 50mm)
7NB-31R2-1 1.3 ±0.5kHz
300 max.
40.0 ±30%
[120Hz]
31.2
19.7
18.2
0.22
0.10
Nickel Alloy
Plate Material
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
1
Red
øD øa
øb
Black
Blue
t
T
Self Drive Type
Part Number
Resonant Resonant Capacitance Plate Size Element Size Electrode Size Thickness Plate Thickness
dia. D
dia. a
dia. b
T
t
Frequency Impedance
(nF)
(mm)
(mm)
(mm)
(mm)
(mm)
(kHz)
(ohm)
7BB-20-6C
6.3 ±0.6kHz
500 max.
8.5 ±30%
[1kHz]
20.0
14.0
12.8
0.42
0.20
Brass
7BB-20-6CL0
6.3 ±0.6kHz
800 max.
8.5 ±30%
[1kHz]
20.0
14.0
12.8
0.42
0.20
Brass
(with Lead Wire:
AWG32 Length 50mm)
7BB-27-4C
4.6 ±0.5kHz
200 max.
18.0 ±30%
[1kHz]
27.0
19.7
18.2
0.54
0.30
Brass
7BB-27-4CL0
4.6 ±0.5kHz
350 max.
18.0 ±30%
[1kHz]
27.0
19.7
18.2
0.54
0.30
Brass
(with Lead Wire:
AWG32 Length 50mm)
7BB-35-3C
2.8 ±0.5kHz
200 max.
26.0 ±30%
[1kHz]
35.0
25.0
23.0
0.53
0.30
Brass
7BB-35-3CL0
2.8 ±0.5kHz
200 max.
26.0 ±30%
[1kHz]
35.0
25.0
23.0
0.53
0.30
Brass
(with Lead Wire:
AWG32 Length 50mm)
7BB-41-2C
2.2 ±0.3kHz
250 max.
24.0 ±30%
[1kHz]
41.0
25.0
23.0
0.63
0.40
Brass
7BB-41-2CL0
2.2 ±0.3kHz
350 max.
24.0 ±30%
[1kHz]
41.0
25.0
23.0
0.63
0.40
Brass
(with Lead Wire:
AWG32 Length 50mm)
7SB-34R7-3C
3.1 ±0.3kHz
150 max.
24.0 ±30%
[1kHz]
34.7
25.0
23.4
0.50
0.25
Stainless
c Node Diameter
Part Number
Node Diameter (mm)
7BB-20-6C
’
7BB-27-4C
’
7BB-35-3C
’
7BB-41-2C
’
s3OUNDDIAPHRAGMSWITHOUTFEEDBACKELECTRODEALSOHAVETHESAMENODEDIAMETERS
6
Plate Material
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Piezoelectric Diaphragms Notice
1
c Notice (Soldering and Mounting)
1. Applying load on the center area of the diaphragm
may cause cracking in the ceramic element. When
the diaphragm is supported by the edge, the load
should be applied only around the edge.
2. Please consult with a Murata representative if
soldering of the component is needed.
c Notice (Handling)
1. Please do not touch the component with a bare hand
because the electrode may become corroded.
2. The component may be damaged if mechanical stress
exceeding specifications is applied.
3. Take care to protect the operating circuit from surge
voltage resulting from excessive force, falling, shock or
temperature change.
4. If DC voltage is applied to the component, silver migration
may occur. Please strictly avoid subjecting the
component to DC voltage for long periods.
5. The resistor should be used as shown in Fig. A.
A suitable resistance value should be chosen, preferably
1kΩ to 2kΩ. Instead of this measure, a diode may also be
applied as shown in Fig. B.
R
IC
IC
Fig. A
Fig. B
6. Avoid excessive pulling of the lead wire because the wire
may break or the soldering point come off.
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Piezoelectric Sound Components
Piezoelectric Sounders External Drive Pin Type
Microcomputers are widely used for microwave
ovens, air conditioners, cars, toys, timers, and
alarm equipment. Externally driven piezoelectric
sounders are used in digital watches, electronic
calculators, telephones and other equipment.
They are driven by a signal (ex.: 2048Hz or 4096Hz)
from an LSI and provide melodious sound.
0.9
3.5
6.9
ø12.6
2–ø0.5
5.0
2–ø1.0
c Features
PKM13EPYH4002-B0
7.5
1. Low power consumption
2. No contacts; therefore, noiseless and highly reliable
2–ø2.5
(in mm)
Tol.: ±0.5
c Applications
1. Various office equipment such as PPCs, printers and
keyboards
2. Audible feedback-response to some action or input.
3. Confirmation sound of various audio equipment
1.2
3.5
8.6
R1.0
10.0
ø17.0
Terminal of marking
side should be connected
to hot side of D.C.
11.0
2-ø1.2
PKM17EPP-2002-B0
2-ø3.5
(in mm)
Tol.: ±0.5
12.6
1.2
7.0
4.7
8.0
20°
R1.0
2-ø1.5
4.8
10.5
Hole Pattern
(Reference)
23.0
1.6
ø22.0
0.8
2-ø3.5
4.0
(in mm)
Tol.: ±0.5
PKM17EPPH4001-B0
Part Number
PKM17EPPH4001-B0
PKM17EPPH4002-B0
5.0
11.0
5.0 6.0
2-ø1.2
8.3
10.0
ø17.0
PKM22EPH2001
6.5
3.5
R1.0
(in mm)
Tol.: ±0.5
Part Number
PKM22EPH2001
PKM22EPH2002
PKM22EPH2003
4.0
8.0
12.0
1.2
7.0
10.8
1.2
R1.0
0.8
0.8
10.0
10.0
ø22.0
ø22.0
2–ø1.2
10.0
2–ø1.2
10.0
2
2–ø3.5
(in mm)
Tol.: ±0.5
PKM22EPPH2001-B0
Part Number
PKM22EPPH2001-B0
PKM22EPPH2002-B0
6.5
3.5
2–ø3.5
(in mm)
Tol.: ±0.5
PKM22EPPH4001-B0
Part Number
PKM22EPPH4001-B0
PKM22EPPH4002-B0
6.5
3.5
Continued on the following page.
8
P37E.pdf
Feb.1,2012
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Continued from the preceding page.
1.2
10.8
6.5 8.2
3.5
0.8 10.0
0.8
10.0
ø22.0
2-ø1.2
ø22.0
R8.
5
2–ø3.5
2-ø3.5
(in mm)
Tol.: ±0.5
PKM22EPPH4007-B0
Part Number
PKM22EPPH4007-B0
PKM22EPPH4012-B0
0°
12
0°
12
2
10.0
5.0 5.0
18°
18°
ø1.2
3–ø1.5
3–ø1.7
PKM22EPPH4005-B0
1.2
R1.0
R1.0
(in mm)
Tol.: ±0.5
6.5
3.5
4.0
1.0
7.5
15.5
26.5
R11.0
1.0
0.8 +0.1
–0
3.5
PKM22EPTH2001-B0
12.5
6.0
22.0
0.25
3.0
7.0
(in mm)
Tol.: ±0.5
Part Number
Sound
Pressure Level
(dB)
Sound Pressure
Level (Ref. only)
(dB)
Operating
Storage
Operating
Capacitance
Temp. Range Temp. Range
Voltage Range
(nF)
(°C)
(°C)
PKM13EPYH4002-B0
70 min.
70 min.
30.0Vp-p max.
[3Vp-p,4kHz,square wave,10cm] [1Vrms,4kHz,sine wave,10cm]
5.5 ±30%
[1kHz]
-40 to +85
-40 to +85
PKM17EPP-2002-B0
70 min.
70 min.
25.0Vo-p max.
[3Vo-p,2kHz,square wave,10cm] [1Vrms,2kHz,sine wave,10cm] [with polarity]
34.0 ±30%
[120Hz]
-20 to +70
-30 to +80
PKM17EPPH4001-B0
72 min.
72 min.
25.0Vp-p max.
[3Vp-p,4kHz,square wave,10cm] [1Vrms,4kHz,sine wave,10cm]
7.0 ±30%
[1kHz]
-20 to +70
-30 to +80
PKM22EPH2001
75 min.
75 min.
25.0Vp-p max.
[3Vp-p,2kHz,square wave,10cm] [1Vrms,2kHz,sine wave,10cm]
17.0 ±30%
[120Hz]
-20 to +70
-30 to +80
PKM22EPPH2001-B0
70 min.
70 min.
30.0Vp-p max.
[3Vp-p,2kHz,square wave,10cm] [1Vrms,2kHz,sine wave,10cm]
19.0 ±30%
[120Hz]
-20 to +70
-30 to +80
PKM22EPPH4001-B0
75 min.
75 min.
30.0Vp-p max.
[3Vp-p,4kHz,square wave,10cm] [1Vrms,4kHz,sine wave,10cm]
12.0 ±30%
[1kHz]
-20 to +70
-30 to +80
PKM22EPPH4005-B0
75 min.
75 min.
30.0Vp-p max.
[3Vp-p,4kHz,square wave,10cm] [1Vrms,4kHz,sine wave,10cm]
12.0 ±30%
[1kHz]
-20 to +70
-30 to +80
PKM22EPPH4007-B0
85 min.
85 min.
30.0Vp-p max.
[3Vp-p,4kHz,square wave,10cm] [1Vrms,4kHz,sine wave,10cm]
12.0 ±30%
[1kHz]
-20 to +70
-30 to +80
PKM22EPTH2001-B0
70 min.
70 min.
25.0Vp-p max.
[3Vp-p,2kHz,square wave,10cm] [1Vrms,2kHz,sine wave,10cm]
19.0 ±30%
[120Hz]
-20 to +70
-30 to +80
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Freq. Response (Square Wave 3Vp-p, 10cm)
PKM13EPYH4002-B0
PKM17EPP-2002-B0
100
100
Input Voltage: 3.00 Vo-p Square
Distance: 10cm
Input Voltage: 3.00 Vp-p Square
Distance: 10cm
90
2
Sound Pressure Level (dB)
Sound Pressure Level (dB)
90
80
70
60
80
70
60
50
50
40
100
500
1k
Frequency (Hz)
5k
10k
40
100
20k
PKM17EPPH4001-B0
Sound Pressure Level (dB)
Sound Pressure Level (dB)
70
60
5k
10k
20k
5k
10k
20k
5k
10k
20k
80
70
60
50
50
500
1k
Frequency (Hz)
5k
10k
40
100
20k
PKM22EPPH2001-B0
500
1k
Frequency (Hz)
PKM22EPPH4001-B0
100
100
Input Voltage: 3.00 Vp-p Square
Distance: 10cm
Input Voltage: 3.00 Vp-p Square
Distance: 10cm
90
90
Sound Pressure Level (dB)
Sound Pressure Level (dB)
20k
90
80
80
70
60
80
70
60
50
50
500
1k
Frequency (Hz)
5k
10k
40
100
20k
PKM22EPPH4005-B0
500
1k
Frequency (Hz)
PKM22EPPH4007-B0
110
100
Input Voltage: 3.00 Vp-p Square
Distance: 10cm
Input Voltage: 3.00 Vp-p Square
Distance: 10cm
100
Sound Pressure Level (dB)
90
Sound Pressure Level (dB)
10k
Input Voltage: 3.00 Vp-p Square
Distance: 10cm
Input Voltage: 3.00 Vp-p Square
Distance: 10cm
80
70
60
90
80
70
60
50
40
100
5k
100
90
40
100
1k
Frequency (Hz)
PKM22EPH2001
100
40
100
500
500
1k
Frequency (Hz)
5k
10k
20k
50
100
500
1k
Frequency (Hz)
Continued on the following page.
10
P37E.pdf
Feb.1,2012
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Continued from the preceding page.
c Freq. Response (Square Wave 3Vp-p, 10cm)
PKM22EPTH2001-B0
100
Input Voltage: 3.00 Vp-p Square
Distance: 10cm
Sound Pressure Level (dB)
90
80
2
70
60
50
40
100
500
1k
Frequency (Hz)
5k
10k
20k
c Freq. Response (Sine Wave 1Vrms, 10cm)
PKM13EPYH4002-B0
PKM17EPP-2002-B0
100
100
Input Voltage: 1.00 Vrms Sine
Distance: 10cm
Input Voltage: 1.00 Vrms Sine
Distance: 10cm
90
Sound Pressure Level (dB)
Sound Pressure Level (dB)
90
80
70
60
50
40
100
80
70
60
50
500
1k
Frequency (Hz)
5k
10k
40
100
20k
PKM17EPPH4001-B0
20k
Input Voltage: 1.00 Vrms Sine
Distance: 10cm
Sound Pressure Level (dB)
Sound Pressure Level (dB)
10k
90
90
80
70
60
80
70
60
50
50
500
1k
Frequency (Hz)
5k
10k
40
100
20k
PKM22EPPH2001-B0
500
1k
Frequency (Hz)
5k
10k
20k
5k
10k
20k
PKM22EPPH4001-B0
100
100
Input Voltage: 1.00 Vrms Sine
Distance: 10cm
Input Voltage: 1.00 Vrms Sine
Distance: 10cm
90
Sound Pressure Level (dB)
90
Sound Pressure Level (dB)
5k
100
Input Voltage: 1.00 Vrms Sine
Distance: 10cm
80
70
60
50
40
100
1k
Frequency (Hz)
PKM22EPH2001
100
40
100
500
80
70
60
50
500
1k
Frequency (Hz)
5k
10k
20k
40
100
500
1k
Frequency (Hz)
Continued on the following page.
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Continued from the preceding page.
c Freq. Response (Sine Wave 1Vrms, 10cm)
PKM22EPPH4005-B0
PKM22EPPH4007-B0
100
110
Input Voltage: 1.00 Vrms Sine
Distance: 10cm
Input Voltage: 1.00 Vrms Sine
Distance: 10cm
2
100
Sound Pressure Level (dB)
Sound Pressure Level (dB)
90
80
70
60
50
40
100
500
1k
Frequency (Hz)
5k
10k
20k
PKM22EPTH2001-B0
Input Voltage: 1.00 Vrms Sine
Distance: 10cm
Sound Pressure Level (dB)
90
80
70
60
50
12
80
70
60
100
40
100
90
500
1k
Frequency (Hz)
5k
10k
20k
50
100
500
1k
Frequency (Hz)
5k
10k
20k
P37E.pdf
Feb.1,2012
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Piezoelectric Sounders (External Drive Pin Type) Circuit/Notice
c Circuit
The following are examples of externally driven circuits.
(1) Unstable multi-vibrator using Tr.
(2) Circuits using inverters or NAND gates.
(1)
2
(2)
+V
1MΩ
510Ω
20kΩ
20kΩ
510Ω
120kΩ
0.01μF
0.01μF
+V
0.001μF
1kΩ
1kΩ
1kΩ
1kΩ
Input
c Notice (Soldering and Mounting)
1. Notice (Soldering and Mounting)
(1) Soldering Iron
(a) Immerse lead terminals up to 1.5mm from
component's body in soldering bath of +260±5°C
for 10±1.0 seconds, and then leave components
in natural conditions for 4 hours.
(b) Directly contact the lead terminal with the
tip of the soldering iron for +350±5°C for
3.0±0.5 seconds, and then leave components
in natural conditions for 4 hours.
(2) Reflow
The component cannot withstand reflow soldering.
2. Washing of the component is prohibited because
it is not sealed.
3. For Part Numbers mentioned below, please do not
insert the component on double-sided PCB with
plated through hole. When melted solder touches
the base of lead terminal, a part of the plastic case
may melt, causing electrical failure.
· Part Number
PKM13EPYH4002-B0/PKM17EPP-2002-B0
PKM17EPPH4001-B0/PKM22EPPH2001-B0
PKM22EPPH4001-B0/PKM22EPPH4007-B0
c Notice (Handling)
1. The component may be damaged if mechanical stress
exceeding specifications is applied.
2. Take care to protect the operating circuit from surge
voltage resulting from excessive force, falling, shock or
temperature change.
3. If DC voltage is applied to the component, silver migration
may occur. Please strictly avoid subjecting the
component to DC voltage for long periods.
4. The resistor should be used as shown in Fig. A.
A suitable resistance value should be chosen, preferably
1kΩ to 2kΩ. Instead of this measure, a diode may also be
applied as shown in Fig. B.
R
IC
IC
Fig. A
Fig. B
5. Avoid excessive pulling of the lead wire because the wire
may break or the soldering point come off.
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Piezoelectric Sound Components
Piezoelectric Sounders External Drive Pin Type Taping
Taking advantage of extensive automatic insertion
design technology and materials experience, Murata
has developed standard taping type piezoelectric
sounders.
This Murata technology supports labor and cost saving
measures.
0.9
6.9
22.0
5.0
2–ø0.5
c Features
1. Lead dimension: Improved mounting reliability
(cut & clinch) due to round terminal
2. High, stable mountability
3. Ammo packaging
7.5
2–ø1.0
2–ø2.5
Sound
Pressure Level
(dB)
Part Number
PKM13EPYH4000-A0
Sound Pressure
Level (Ref. only)
(dB)
-40 to +85
-40 to +85
100
Input Voltage: 3.00 Vp-p Square
Distance: 10cm
Input Voltage: 1.00 Vrms Sine
Distance: 10cm
90
Sound Pressure Level (dB)
90
80
70
60
80
70
60
50
50
14
5.5 ±30%
[1kHz]
c Freq. Response (Sine Wave 1Vrms, 10cm)
100
40
100
(in mm)
Tol.: ±0.5
Operating
Storage
Operating
Capacitance
Temp. Range Temp. Range
Voltage Range
(nF)
(°C)
(°C)
70 min.
70 min.
30.0Vp-p max.
[3Vp-p,4kHz,square wave,10cm] [1Vrms,4kHz,sine wave,10cm]
c Freq. Response (Square Wave 3Vp-p, 10cm)
Sound Pressure Level (dB)
3
ø12.6
500
1k
Frequency (Hz)
5k
10k
20k
40
100
500
1k
Frequency (Hz)
5k
10k
20k
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
c Taping Dimension
dh dh
P2
P
dS
W1
W
L1
W0
H0
d1
H1
W2
A
D
P1
3
F
Item
t
D0
P0
Code
Nominal Value
Tol.
Width of diameter
D
ø12.6
±0.5
Height of component
A
6.9
±0.5
Dimensions of terminal
d1
ø0.5
±0.1
Lead length under the
hold-down tape
L1
8.0 min.
Pitch of component
P
25.4
±0.5
Pitch of sprocket
P0
12.7
±0.2
Length from hole center to lead
P1
3.85
±0.7
Length from hole center to
component center
P2
6.35
±0.7
Lead spacing
F
5.0
±0.5
Slant forward or backward
dh
0
±1.0
Width of carrier tape
W
18.0
±0.5
Width of hold-down tape
W0
12.5 min.
Position of sprocket hole
W1
9.0
Gap of hold-down tape and
carrier tape
W2
2.0 max.
Distance between the center of
sprocket hole and lead stopper
H0
18.0
Total height of component
H1
26.0 max.
Diameter of sprocket hole
D0
ø4.0
±0.2
0.6
±0.2
0
±1.0
Total thickness of tape
Body tilt
t
dS
Notes
—
—
Tolerance for Pitches 10ZP0=127±2mm
360°: 1mm max.
Hold-down tape does not exceed the carrier tape.
±0.5
—
±0.5
—
(in mm)
15
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Piezoelectric Sounders (External Drive Pin Type Taping) Circuit/Notice
c Circuit
The following are examples of externally driven circuits.
(1) Unstable multi-vibrator using Tr.
(2) Circuits using inverters or NAND gates.
(1)
(2)
+V
1MΩ
510Ω
20kΩ
20kΩ
510Ω
120kΩ
0.01μF
0.01μF
+V
0.001μF
1kΩ
1kΩ
1kΩ
1kΩ
Input
3
c Notice (Soldering and Mounting)
1. Notice (Soldering and Mounting)
(1) Soldering Iron
(a) Immerse lead terminals up to 1.5mm from
component's body in soldering bath of +260±5°C
for 10±1.0 seconds, and then leave components
in natural conditions for 4 hours.
(b) Directly contact the lead terminal with the
tip of the soldering iron for +350±5 °C for
3.0±0.5 seconds, and then leave components
in natural conditions for 4 hours.
(2) Reflow
The component cannot withstand reflow soldering.
2. Please do not insert the component on double-sided
PCB with plated through hole. When melted solder
touches the base of lead terminal, a part of the plastic
case may melt, causing electrical failure.
3. Washing of the component is not acceptable.
Because it is not sealed.
c Notice (Handling)
1. The component may be damaged if mechanical stress
exceeding specifications is applied.
2. Take care to protect the operating circuit from surge
voltage resulting from excessive force, falling, shock or
temperature change.
3. If DC voltage is applied to the component, silver migration
may occur. Please strictly avoid subjecting the
component to DC voltage for long periods.
4. The resistor should be used as shown in Fig. A.
A suitable resistance value should be chosen, preferably
1kΩ to 2kΩ. Instead of this measure, a diode may also be
applied as shown in Fig. B.
R
IC
IC
Fig. A
5. Avoid excessive pulling of the lead wire because the wire
may break or the soldering point come off.
16
Fig. B
P37E.pdf
Feb.1,2012
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Piezoelectric Sound Components
Piezoelectric Sounders External Drive Lead Wire Type
Microcomputers are widely used for microwave
ovens, air conditioners, cars, toys, timers, and
alarm equipment. Externally driven piezoelectric
sounders are used in digital watches, electronic
calculators, telephones and other equipment.
They are driven by a signal (ex.: 2048Hz or 4096Hz)
from an LSI and provide melodious sound.
+0
c Features
7.0 –0.3
3±1
70±5
ø16.8
1. Low power consumption
2. No contacts; therefore, noiseless and highly reliable
PKM17EWH2001
(in mm)
Tol.: ±0.5
c Applications
1. Various office equipment such as PPCs, printers and
keyboards
2. Audible feedback-response to some action or input.
3. Confirmation sound of various audio equipment
4
+0
4.0 –0.3
5±2
100±10
ø16.8±0.2
PKM17EWH4000
(in mm)
Part Number
Sound
Pressure Level
(dB)
Sound Pressure
Level (Ref. only)
(dB)
Operating
Operating
Capacitance
Temp. Range
Voltage Range
(nF)
(°C)
Storage
Temp. Range
(°C)
PKM17EWH2001
72 min.
70 min.
[3Vp-p,2kHz,square wave,10cm] [1Vrms,2kHz,sine wave,10cm]
7.0Vp-p max.
40.0 ±30%
[120Hz]
-20 to +70
-30 to +80
PKM17EWH4000
75 min.
70 min.
25.0Vp-p max.
[3Vp-p,4kHz,square wave,10cm] [1Vrms,4kHz,sine wave,10cm]
9.5 ±30%
[1kHz]
-20 to +70
-30 to +80
c Freq. Response (Square Wave 3Vp-p, 10cm)
PKM17EWH2001
PKM17EWH4000
100
Input Voltage: 3.00 Vp-p Square
Distance: 10 cm
Input Voltage: 3.00 Vp-p Square
Distance: 10cm
90
Sound Pressure Level (dB)
Sound Pressure Level (dB)
90
100
80
70
60
50
40
100
80
70
60
50
500
1k
Frequency (Hz)
5k
10k
20k
40
100
500
1k
Frequency (Hz)
5k
10k
20k
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Freq. Response (Sine Wave 1Vrms, 10cm)
PKM17EWH2001
PKM17EWH4000
100
Input Voltage: 1.00 Vrms Sine
Distance: 10 cm
Input Voltage: 1.00 Vrms Sine
Distance: 10cm
90
Sound Pressure Level (dB)
Sound Pressure Level (dB)
90
100
80
70
60
50
40
100
4
18
80
70
60
50
500
1k
Frequency (Hz)
5k
10k
20k
40
100
500
1k
Frequency (Hz)
5k
10k
20k
P37E.pdf
Feb.1,2012
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Piezoelectric Sounders (External Drive Lead Wire Type) Circuit/Notice
c Circuit
The following are examples of externally driven circuits.
(1) Unstable multi-vibrator using Tr.
(2) Circuits using inverters or NAND gates.
(1)
(2)
+V
1MΩ
510Ω
20kΩ
20kΩ
510Ω
120kΩ
0.01μF
0.01μF
+V
0.001μF
1kΩ
1kΩ
1kΩ
1kΩ
Input
c Notice (Soldering and Mounting)
Washing of the component is prohibited because it is
not sealed.
4
c Notice (Handling)
1. The component may be damaged if mechanical stress
exceeding specifications is applied.
2. Take care to protect the operating circuit from surge
voltage resulting from excessive force, falling, shock or
temperature change.
3. If DC voltage is applied to the component, silver migration
may occur. Please strictly avoid subjecting the
component to DC voltage for long periods.
4. The resistor should be used as shown in Fig. A.
A suitable resistance value should be chosen, preferably
1kΩ to 2kΩ. Instead of this measure, a diode may also be
applied as shown in Fig. B.
R
IC
IC
Fig. A
Fig. B
5. Avoid excessive pulling of the lead wire because the wire
may break or the soldering point come off.
19
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Piezoelectric Sound Components
(0.4)
Taking advantage of extensive acoustic and mechanical
design technology and high performance ceramics,
Murata has developed SMD piezoelectric sounders that
suit the thin, high-density design of electronic
equipment.
3.0 max.
Piezoelectric Sounders External Drive SMD Type
(3.3)
Sound Emitting Hole
12.0
(ø0.15) Open Hole
(3.0)
4.0
12.0
(3.0)
1.1
c Features
1. Small, thin and lightweight
2. High sound pressure level and clear sound
3. Reflowable
4. Tape & Reel supply
Marking
PKLCS1212E2400-R1
( ): Ref. only
Tol.: ±0.2
(in mm)
(1.9)
Sound Emitting Hole
12.0
12.0
1.2
(0.7)
5
4.0
(0.9)
3.0 max.
10.0
(6.4)
10.0
Sound Pressure Level
(dB)
Part Number
Operating
Voltage Range
(2.1)
PKLCS1212E4001-R1
Operating
Temp. Range
(°C)
Storage
Temp. Range
(°C)
( ): Ref. only
Tol.: ±0.2
(in mm)
Use
PKLCS1212E2400-R1
75 min.[±1.5 Vo-p,2.4kHz,square wave,10cm] ±12.5 Vo-p max.
-20 to +70
-30 to +80
For consumer electronics
PKLCS1212E24A0-R1
75 min.[±1.5 Vo-p,2.4kHz,square wave,10cm] ±12.5 Vo-p max.
-40 to +85
-40 to +85
For automotive electronics
PKLCS1212E4001-R1
75 min.[3Vp-p,4kHz,square wave,10cm]
25 Vp-p max.
-20 to +70
-30 to +80
For consumer electronics
PKLCS1212E40A1-R1
75 min.[3Vp-p,4kHz,square wave,10cm]
25 Vp-p max.
-40 to +85
-40 to +85
For automotive electronics
c Standard Land Pattern Dimensions
12.4
4.0
10.0
(in mm)
20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
c Freq. Response (Square Wave 3Vp-p, 10cm)
PKLCS1212E2400-R1
PKLCS1212E4001-R1
100
80
70
60
50
40
1.0
Input Voltage: 3.00Vp-p Square
Distance: 10cm
90
Sound Pressure Level (dB)
Sound Pressure Level (dB)
90
100
Input Voltage: ±1.5Vo-p Square
Distance: 10cm
80
70
60
50
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
40
1.0
1.5
Frequency (kHz)
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
Frequency (kHz)
c Taping Dimension
Direction of Feed
Cover Film
240–280
Empty
400–560
Leader
25.5±0.5
33.5 max.
16.0±0.1
Components
2.2±0.2
(ø330)
(ø80)
11.5±0.1
Trailer
160–200
12.5±0.1
+0.1
ø1.50 -0.0
2.0±0.1
24.0±0.2
4.0±0.1
Dimensions of Reel
1.75±0.1
Dimensions of Carrier Tape
5
13.0±0.2
3.1±0.1
Cover film peel strength force: 0.1–0.7N
Cover film peel speed: 300mm/min.
Cover Film
12.5±0.1
10°
(in mm)
21
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Piezoelectric Sounders (External Drive SMD Type) Circuit/Notice
c Circuit
The following are examples of externally driven circuits.
(1) Unstable multi-vibrator using Tr.
(2) Circuits using inverters or NAND gates.
(1)
(2)
+V
1MΩ
510Ω
20kΩ
20kΩ
510Ω
120kΩ
0.01μF
0.01μF
+V
0.001μF
1kΩ
1kΩ
1kΩ
1kΩ
Input
c Notice (Soldering and Mounting)
Washing of the component is prohibited because it is
not sealed.
c Notice (Handling)
5
1. The component may be damaged if mechanical stress
exceeding specifications is applied.
2. Take care to protect the operating circuit from surge
voltage resulting from excessive force, falling, shock or
temperature change.
3. If DC voltage is applied to the component, silver migration
may occur. Please strictly avoid subjecting the
component to DC voltage for long periods.
4. The resistor should be used as shown in Fig. A.
A suitable resistance value should be chosen, preferably
1kΩ to 2kΩ. Instead of this measure, a diode may also be
applied as shown in Fig. B.
R
IC
IC
Fig. A
5. Avoid excessive pulling of the lead wire because the wire
may break or the soldering point come off.
22
Fig. B
P37E.pdf
Feb.1,2012
P37E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Feb.1,2012
Piezoelectric Sound Components
Piezoelectric Ringers (PIEZORINGERr)
As the result of rapid development of ICs in
telephones, demand for piezoelectric sounders as
telephone ringers has also rapidly increased. To
effectively satisfy this rising demand, Murata
provides a suitable piezoelectric sounder called
"PIEZORINGER" with the following features.
R18.5
9.0
6.0
120˚
7.5
33 +0
–0.4
1.0
c Features
1. Extremely clear sound
2. Since it is voltage driven, the power consumption
is negligible.
3. It can be driven directly from ICs.
4. Thin and lightweight
0.4
Part Number
PKM33EPH1201C
PKM33EPH1202C
PKM33EPH1201C
46.0
(in mm)
Tol.: ±0.5
5.0
0
61.0
40.0
52.0
ø2.8
ø44.0
2.8
2–ø3.5
100±10
5±2
100±10
5±2
3.3
4.0
ø34.5
9.0
3.0
14.0
PKM44EWH1001C
PKM34EWH1101C/1201C
(in mm)
Tol.: ±0.5
(in mm)
Tol.: ±0.5
6
Pin Type
Sound
Pressure Level
(dB)
Part Number
PKM33EPH1201C
Sound Pressure
Level (Ref. only)
(dB)
Operating
Storage
Operating
Capacitance
Temp. Range Temp. Range
Voltage Range
(nF)
(°C)
(°C)
68 min.
65 min.
40.0Vp-p max.
[30Vp-p,1.2kHz,square wave,1m] [1Vrms,1.2kHz,sine wave,10cm]
40.0 ±30%
[120Hz]
-20 to +70
-30 to +80
Lead Wire Type
Part Number
Sound
Pressure Level
(dB)
Sound Pressure
Level (Ref. only)
(dB)
Operating
Storage
Operating
Capacitance
Temp. Range Temp. Range
Voltage Range
(nF)
(°C)
(°C)
PKM34EWH1101C
70 min.
60 min.
40.0Vp-p max.
[30Vp-p,1.1kHz,square wave,1m] [1Vrms,1.1kHz,sine wave,10cm]
40.0 ±30%
[120Hz]
-20 to +70
-30 to +80
PKM34EWH1201C
70 min.
60 min.
60.0Vp-p max.
[30Vp-p,1.2kHz,square wave,1m] [1Vrms,1.2kHz,sine wave,10cm]
32.0 ±30%
[120Hz]
-20 to +70
-30 to +80
68.0 ±30%
[120Hz]
-20 to +70
-30 to +80
PKM44EWH1001C
75 min.
[30Vp-p,1kHz,square wave,1m]
70 min.
[1Vrms,1kHz,sine wave,10cm]
30.0Vp-p max.
23
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
c Freq. Response (Square Wave 30Vp-p, 1m)
PKM33EPH1201C
PKM34EWH1101C
100
100
Input Voltage: 30Vp-p Square
Distance: 1m
Input Voltage: 30 Vp-p Square
Distance: 1m
90
Sound Pressure Level (dB)
Sound Pressure Level (dB)
90
80
70
60
70
60
50
50
40
100
80
500
1k
Frequency (Hz)
5k
10k
40
20k
100
1k
5k
10k
20k
5k
10k
20k
5k
10k
20k
5k
10k
20k
Frequency (Hz)
PKM34EWH1201C
PKM44EWH1001C
100
100
Input Voltage: 30Vp-p Square
Distance: 1m
Input Voltage: 30 Vp-p Square
Distance: 1m
90
90
Sound Pressure Level (dB)
Sound Pressure Level (dB)
500
80
70
60
80
70
60
50
50
40
40
100
500
1k
Frequency (Hz)
5k
10k
100
20k
500
1k
Frequency (Hz)
c Freq. Response (Sine Wave 1Vrms, 10cm)
PKM33EPH1201C
PKM34EWH1101C
100
100
Input Voltage: 1Vrms Sine
Distance: 10cm
Input Voltage: 1.00 Vrms Sine
Distance: 10cm
6
90
Sound Pressure Level (dB)
Sound Pressure Level (dB)
90
80
70
60
70
60
50
50
40
100
80
40
500
1k
Frequency (Hz)
5k
10k
20k
100
PKM34EWH1201C
PKM44EWH1001C
100
Input Voltage: 1Vrms Sine
Distance: 10cm
Input Voltage: 1.00 Vrms Sine
Distance: 10cm
90
90
Sound Pressure Level (dB)
Sound Pressure Level (dB)
1k
Frequency (Hz)
100
80
70
60
80
70
60
50
50
40
100
500
500
1k
Frequency (Hz)
5k
10k
20k
40
100
500
1k
Frequency (Hz)
Continued on the following page.
24
P37E.pdf
Feb.1,2012
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Piezoelectric Ringers (PIEZORINGERr) Notice
c Notice (Soldering and Mounting)
1. Notice (Soldering and Mounting)
(1) Soldering Iron
(a) Immerse lead terminals up to 1.5mm from
component's body in soldering bath of +260±5°C
for 10±1.0 seconds, and then leave components
in natural conditions for 4 hours.
(b) Directly contact the lead terminal with the
tip of the soldering iron for +350±5°C for
3.0±0.5 seconds, and then leave components
in natural conditions for 4 hours.
(2) Reflow
The component cannot withstand reflow soldering.
2. Washing of the component is prohibited because
it is not sealed.
c Notice (Handling)
1. The component may be damaged if mechanical stress
exceeding specifications is applied.
2. Take care to protect the operating circuit from surge
voltage resulting from excessive force, falling, shock or
temperature change.
3. If DC voltage is applied to the component, silver migration
may occur. Please strictly avoid subjecting the
component to DC voltage for long periods.
4. The resistor should be used as shown in Fig. A.
A suitable resistance value should be chosen, preferably
1kΩ to 2kΩ. Instead of this measure, a diode may also be
applied as shown in Fig. B.
R
IC
6
IC
Fig. A
Fig. B
5. Avoid excessive pulling of the lead wire because the wire
may break or the soldering point come off.
25
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Piezoelectric Sound Components
Piezoelectric Sounders Self Drive Pin Type
Hole pattern
10.9
12.3
18˚
F
1. Gas alarms, burglar alarms, smoke detectors
2. Air conditioners, microwave ovens, washing machines
and other home-electronic appliances controlled by
microcomputers
3. Toys, game machines
Part Number
PKM24SPH3805
F
ø3-1.2
11.0
8.3
ø24.0
(in mm)
Tol.: ±0.5
3.5
PKM24SPH3805
Part Number
PKM24SPH3805
PKM24SPH3810
PKM24SPH3807
PKM24SPH3801
4.0
8.0
12.0
14.0
Oscillating
Frequency
(kHz)
Current
Consumption
(mA)
Operating
Voltage Range
Operating
Temp. Range
(°C)
Storage
Temp. Range
(°C)
90 min.
[12Vdc,10cm]
3.8 ±0.4kHz
[12Vdc]
12 max.
[12Vdc]
3.0 to 20.0Vdc
-20 to +70
-30 to +80
Vdc
620Ω
150kΩ
M
3.9kΩ
F
G
Tr.
GND
Tr: 2SC1815Y or equivalent
26
5
Sound
Pressure Level
(dB)
c Standard Circuit Examples
7
8.5
R12.9
4
0˚
13
130˚
c Applications
G
M
R1
4.
2
18˚
11.3
G
M
7.0
Piezoelectric sounder self drive type requires only a
simple circuit and DC power supply. Since this type
uses a resonant system, it is also available for alarms
that need large sound volume.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Piezoelectric Sounders (Self Drive) Notice
c Notice (Soldering and Mounting)
1. Notice (Soldering and Mounting)
(1) Soldering Iron
(a) Immerse lead terminals up to 1.5mm from
component's body in soldering bath of +260±5°C
for 10±1.0 seconds, and then leave components
in natural conditions for 4 hours.
(b) Directly contact the lead terminal with the
tip of the soldering iron for +350±5°C for
3.0±0.5 seconds, and then leave components
in natural conditions for 4 hours.
(2) Reflow
The component cannot withstand reflow soldering.
2. Washing of the component is prohibited because
it is not sealed.
3. Please do not cover the hole with tape or any
other obstacle as this will produce irregular
oscillation.
4. Do not place any obstacle within 15mm of the
top of the component as this will produce
irregular oscillation.
c Notice (Handling)
1. The component may be damaged if mechanical stress
exceeding specifications is applied.
2. Take care to protect the operating circuit from surge
voltage resulting from excessive force, falling, shock
or temperature change.
3. If DC voltage is applied to the component, silver
migration may occur. Please strictly avoid subjecting
the component to DC voltage for long periods.
4. The standard self-driven circuits utilizes
transistor switching. Since the circuit constants
for hfe of the transistor are optimally chosen to
maintain stable oscillation, please design a circuit
following the standard.
7
27
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Piezoelectric Sound Components
Piezoelectric Buzzers Pin Type
c Applications
Part Number
PKB24SPCH3601-B0
0.6±0.1
PKB24SPCH3601-B0
(in mm)
Tol.: ±0.5
Sound
Pressure Level
(dB)
Oscillating
Frequency
(kHz)
Current
Consumption
(mA)
Operating
Voltage Range
Operating
Temp. Range
(°C)
Storage
Temp. Range
(°C)
90 min.
[12Vdc,10cm]
3.6 ±0.5kHz
[12Vdc]
16 max.
[12Vdc]
3.0 to 15.0Vdc
-20 to +70
-30 to +80
c Voltage-Sound Pressure Level/Voltage-Consumption Current
25
100
20
Sound Pressure Level
15
90
10
Consumption Current
5
80
0
28
10
Input Voltage (Vdc)
15
Consumption Current (mA)
Sound Pressure Level (dB)
110
8
4.5±1
15.0
1. Gas alarms, burglar alarms
2. Air conditioners, microwave ovens and various types
of microcomputer controlled home-electronic
appliances
3. Toys, games, and other simple electronic devices
such as teaching aids
5
24.3±0.3
0.7±0.3
R1.0
9.7±0.3
This is a unified piezoelectric sounder that has a
piezoelectric diaphragm of 3 terminals connected to a
self drive circuit, and it easily generates sound with
only a DC power supply (DC3.0-20V). Using a suitably
designed resonant system, this type can be used where
large sound volumes are needed.
P37E.pdf
Feb.1,2012
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Piezoelectric Buzzers Notice
c Notice (Soldering and Mounting)
1. Notice (Soldering and Mounting)
(1) Soldering Iron
(a) Immerse lead terminals up to 1.5mm from
component's body in soldering bath of +260±5°C
for 10±1.0 seconds, and then leave components
in natural conditions for 4 hours.
(b) Directly contact the lead terminal with the
tip of the soldering iron for +350±5°C for
3.0±0.5 seconds, and then leave components
in natural conditions for 4 hours.
(2) Reflow
The component cannot withstand reflow soldering.
2. Washing of the component is prohibited because
it is not sealed.
3. Please do not cover the hole with tape or any
other obstacle as this will produce irregular
oscillation.
4. Do not place any obstacle within 15mm of the
top of the component as this will produce
irregular oscillation.
c Notice (Handling)
1. The component may be damaged if mechanical stress
over this specification is applied.
2. Resistors should not be connected in series to the power
supply as this will produce irregular oscillation. When a
resistor is necessary to control sound volume, use a
capacitor (1μF) in parallel with the buzzer together.
+Vdc
Buzzer
Capacitor
(1μF)
3. Avoid excessive pulling of the lead wire because the wire
may break or the soldering point come off.
8
29
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Piezoelectric Sound Components Notice
c Notice (Storage and Operating Condition)
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable and avoid places
where there are large temperature changes.
Please store the products under the following
conditions:
Temperature: -10 to + 40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six
months after delivery under the conditions of a
sealed and unopened package. Please use the
products within six months after delivery. If you
store the products for a long time (more than six
months), use carefully because the products may
be degraded in solderability due to storage under
poor conditions.
Please confirm solderability and characteristics
for the products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, may be degraded in
solderability due to storage in a chemical
atmosphere.
30
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
places and/or dusty places.
(3) Please do not store the products in places such
as: in a damp heated place or any place exposed
to direct sunlight or excessive vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under poor
conditions.
(5) Please do not drop the products to avoid cracking
of the ceramic element.
4. Other
Please be sure to consult with our sales
representative or engineer whenever the products
are to be used in conditions not listed above.
Feb.1,2012
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012
Package
c Minimum Quantity (pcs.)
Product Names
Part Number
Minimum Quantity
Ø330mm Reel
Bulk (Box)
Ammo Pack
o Piezoelectric Diaphragms*
External Drive Types
Self Drive Types
7BB-12-9
5120
7BB-15-6
8000
7BB-20-3
3000
7BB-20-6
1800
7BB-20-6L0
600
7BB-27-4
1500
7BB-27-4L0
600
7BB-35-3
800
7BB-35-3L0
400
7BB-41-2
400
7BB-41-2L0
250
7NB-31R2-1
3000
7BB-20-6C
1800
7BB-20-6CL0
600
7BB-27-4C
1500
7BB-27-4CL0
600
7BB-35-3C
800
7BB-35-3CL0
400
7BB-41-2C
600
7BB-41-2CL0
250
7SB-34R7-3C
800
o Piezoelectric Sounders*
External Drive Types
PKLCS1212E2400-R1
1000
PKLCS1212E24A0-R1
1000
PKLCS1212E4001-R1
1000
PKLCS1212E40A1-R1
1000
PKM13EPYH4000-A0
500
PKM13EPYH4002-B0
330
PKM17EPP-2002-B0
200
PKM17EPPH4001-B0
200
PKM17EPPH4002-B0
200
PKM17EWH2001
250
PKM17EWH4000
500
PKM22EPH2001
360
PKM22EPH2002
270
PKM22EPH2003
270
PKM22EPPH2001-B0
750
PKM22EPPH2002-B0
750
PKM22EPPH4001-B0
900
PKM22EPPH4002-B0
900
PKM22EPPH4005-B0
750
PKM22EPPH4007-B0
750
PKM22EPPH4012-B0
750
PKM22EPTH2001-B0
300
Continued on the following page.
"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the
"Minimum Quantity." (As for products series with mark, bulk (bag) quantities shown here differ from actual delivery quantities in a package)
Please contact the nearest sales office for details and for any other products not listed above.
*
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Package
Continued from the preceding page.
Product Names
Part Number
Minimum Quantity
Ø330mm Reel
Bulk (Box)
PKM24SPH3801
270
PKM24SPH3805
360
PKM24SPH3807
270
PKM24SPH3810
270
o Piezoelectric Buzzers*
PKB24SPCH3601-B0
650
o Piezoelectric Ringers (PIEZORINGERr)*
PKM33EPH1201C
300
PKM33EPH1202C
60
PKM34EWH1101C
25
PKM34EWH1201C
25
PKM44EWH1001C
25
Self Drive Types
32
Ammo Pack
Feb.1,2012
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
P37E.pdf
Feb.1,2012