o Part Numbering Radial Lead Type Monolithic Ceramic Capacitors (Part Number) RP E R7 1H q w e 104 r t 2 M1 y u K i A03 A o !0 qProduct ID wSeries/Terminal Product ID Series/Terminal RP E RH E/D RD E Radial Lead Type Monolithic Ceramic Capacitors (DC25V-DC100V) Radial Lead Type Monolithic Ceramic Capacitors 150°C max. (for Automotive) (DC50V-DC100V) Radial Lead Type Monolithic Ceramic Capacitors (Only for Commercial Use) (DC25V-DC1kV) eTemperature Characteristics Code Temperature Characteristics Reference Temperature Temperature Range Capacitance Change or Temperature Coefficient Operating Temperature Range 5C C0G* 25°C 25 to 125°C 0±30ppm/°C -55 to 125°C 5G X8G* 25°C 25 to 150°C 0±30ppm/°C -55 to 150°C C7 X7S 25°C -55 to 125°C ±22% -55 to 125°C D7 X7T 25°C -55 to 125°C +22, -33% -55 to 125°C E4 Z5U 25°C 10 to 85°C +22, -56% 10 to 85°C F1 F 20°C -25 to 85°C +30, -80% -25 to 85°C F5 Y5V 25°C -30 to 85°C +22, -82% -30 to 85°C -55 to 125°C ±15% 125 to 150°C +15, -40% -55 to 125°C ±15% L8 X8L 25°C R7 X7R 25°C -55 to 150°C -55 to 125°C * Please refer to table for Capacitance change under reference temperature. • Capacitance change from each temperature Capacitance Change from 25˚C (%) Char. C0G X8G Nominal Values (ppm/˚C) *1 0±30 -30˚C -55˚C -10˚C Max. Min. Max. Min. Max. Min. 0.58 -0.24 0.40 -0.17 0.25 -0.11 *1: Nominal values denote the temperature coefficient within a range of 25 to 125˚C. rRated Voltage yCapacitance Tolerance Code Rated Voltage 1E DC25V Code Capacitance Temperature Tolerance Characteristics Capacitance Step 1H DC50V C ±0.25pF 2A DC100V D ±0.5pF J ±5% K ±10% X7S/X7T/X7R/ X8L E6 Series M ±20% X7S/X7T/Z5U/ X7R/X8L E3 Series Z +80%, -20% F/Y5V E3 Series 2E DC250V 2W DC450V 2J DC630V 3A DC1kV tCapacitance Expressed by three figures. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits. V5pF : 1pF Step C0G/X8G 6 to 9pF : 1pF Step U10 : E12 Series Continued on the following page. Continued from the preceding page. oIndividual Specification Code uDimensions (LxW) Expressed by three figures Code Dimensions (LxW) 0 4.0g3.5mm or 5.0g3.5mm (Depends on Part Number List) 1 4.0g3.5mm or 4.5g3.5mm or 5.0g3.5mm (Depends on Part Number List) Code Packaging A Ammo Pack 2 5.0g3.5mm or 5.5g4.0mm or 5.7g4.5mm (Depends on Part Number List) B Bulk 3 5.0g4.5mm or 5.5g5.0mm or 6.0g5.5mm (Depends on Part Number List) 4 7.5g5.0mm 5 7.5g7.5mm (DC630V, DC1kV: 7.5g8.0mm) 6 10.0g10.0mm 7 12.5g12.5mm 8 7.5g5.5mm U 7.7g12.5mm (DC630V, DC1kV: 7.7g13.0mm) W 5.5g7.5mm iLead Style Code Lead Style Lead Spacing A1/A2 Straight Long 2.5mm B1 Straight Long 5.0mm C1 Straight Long 10.0mm DB Straight Taping 2.5mm E1/E2 Straight Taping 5.0mm K1 Inside Crimp 5.0mm M1/M2 Inside Crimp Taping 5.0mm P1 Outside Crimp 2.5mm S1/S2 Outside Crimp Taping 2.5mm Lead distance between reference and bottom planes. M1, S1 : H0 = 16.0±0.5mm M2, S2 : H0 = 20.0±0.5mm E1 : H = 17.5±0.5mm E2 : H = 20.0±0.5mm !0Packaging