GLENAIR 440AD084M20

440
440-084
EMI/RFI Tinel-Lock® Ring Adapter
Rotatable Coupling - Split Shell
CONNECTOR
DESIGNATORS
A-F-H-L-S
ROTATABLE
COUPLING
FOR TINEL-LOCK®
RING TERMINATIONS
440 F F 084 M 20 12 AI T1
Product Series
Shrink Boot Options
(Table IV - Omit for none)
Connector Designator
Tinel-Lock® Ring Supplied
(Table V - Omit for none)
Angle and Profile
F = Split 45°
D = Split 90°
Cable Entry (Table IV)
Basic Part No.
Shell Size (Table I)
Finish (Table II)
G
(Table III)
A Thread
(Table I)
E
(Table III)
F (Table III)
H
(Table III)
.94 (23.9) Max
C Typ.
(Table I)
.525
(13.3)
.94 (23.9)
Max
Anti-Rotation
Device (Typ.)
Split 45°
.272 (6.9) .135 (3.4)
±.005 (.1)
Ref.
Split 90°
J
L (Table IV)
(Table IV)
K
(Table IV)
.88 (22.4)
Max
.070 (1.8)
Thermochromic
Paint (Note 4)
Tinel-Lock® Ring
Option (See Table V)
STYLE 2
(45° & 90°
See Note 1)
Tinel-Lock® is a registered trademark of Tyco
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
Series 440 - Page 62
www.glenair.com
440
440-084
EMI/RFI Tinel-Lock® Ring Adapter
Rotatable Coupling - Split Shell
See inside back cover fold-out or pages 13 and 14 for Tables I and II.
TABLE III: ELBOW DIMENSIONS
Shell Size
F
G
E
Conn. Desig.
Max
Max
Max
H
A-F-L-S
.62 (15.7)
.684 (17.4)
.664 (16.9)
08
09
.68 (17.3)
.754 (19.2)
.664 (16.9)
11
10
.75 (19.1)
.814 (20.7)
.724 (18.4)
12
13
.78 (19.8)
.874 (22.2)
.784 (19.9)
15
14
.88 (22.4)
.934 (23.7)
.844 (21.4)
17
16
.94 (23.9) 1.004 (25.5)
.914 (23.2)
18
19
.984 (25.0) 1.00 (25.4) 1.064 (27.0)
21
20
22
23 1.044 (26.5) 1.06 (26.9) 1.124 (28.5)
25 1.104 (28.0) 1.12 (28.4) 1.184 (30.1)
24
J
Dash
I.D.
No.
.250 (6.4)
04
.312 (7.9)
05
.375 (9.5)
06
.437 (11.1)
07
.500 (12.7)
08
.625 (15.9)
10
.750 (19.1)
12
.875 (22.2)
14
16 1.000 (25.4)
18 1.125 (28.6)
20 1.250 (31.8)
K
Dia Max
.375 (9.5)
.437 (11.1)
.500 (12.7)
.562 (14.3)
.625 (15.9)
.750 (19.1)
.875 (22.2)
1.000 (25.4)
1.125 (28.6)
1.250 (31.8)
1.375 (34.9)
TABLE IV: CABLE ENTRY
L
+.008
(.2)
Shrink Boot
-.000
(.0)
Option T1*
.044 (1.1)
202K121-25-0
.044 (1.1)
202K132-25-0
.044 (1.1)
202K132-25-0
.044 (1.1)
202K142-25-0
.044 (1.1)
202K142-25-0
.044 (1.1)
202K153-25-0
.044 (1.1)
202K153-25-0
.069 (1.8)
202K163-25-0
.069 (1.8)
202K163-25-0
.069 (1.8)
202K174-25-0
.069 (1.8)
202K174-25-0
H
Max
.56 (14.2)
.62 (15.7)
.69 (17.5)
.72 (18.3)
.81 (20.6)
.87 (22.1)
.94 (23.9)
1.00 (25.4)
1.06 (26.9)
Shrink Boot
Option T2*
202K121-100-0
202K132-100-0
202K132-100-0
202K142-100-0
202K142-100-0
202K153-100-0
202K153-100-0
202K163-100-0
202K163-100-0
202K174-100-0
202K174-100-0
Tinel-Lock®
Ring Entry
Size
04
05
06
07
08
10
12
14
16
18
20
* Raychem Shrink Boot and Epoxy/Polyamide Two Part Adhesive Paste (S1125) Supplied with "T1" Option
(See Part Number Development)
** Raychem Shrink Boot and Hot-Melt/Polyolyfin Adhesive Supplied with "T2" Option (See Part Number
Development) - This is a Halogen Free System
1. When maximum cable entry (page 21) is exceeded, Style 2 will
be supplied.
Dimensions E, F, G, and H will not apply. Please consult factory.
2. Metric dimensions (mm) are indicated in parentheses.
3. See page 40 for Shrink Boot Reference Information.
4. The Tinel-Lock® ring designator must be specified according to
the type of cable braid used. Tinel-Lock® rings are marked with
thermochromic paint which changes color when the correct
installation temperature is reached.
BI rings are identified with a red spot.
© 2005 Glenair, Inc.
CAGE Code 06324
TABLE V: TINEL-LOCK® RING
Ring
Braid Type
Designator
Single Layer 36 AWG
AI
Single Layer 34 AWG
AI
Single Layer 32 AWG
BI
Single Layer 30 AWG
BI
Double Layer 36 AWG
BI
Double Layer 34 AWG
BI
Double Layer 32 AWG
CI
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
Series 440 - Page 63
www.glenair.com