MIL-C-24308 D-Subminiature 550-005 EMI/RFI D-Subminiature Split Backshell Lamp-Thread Type Shield Termination With Shrink Boot Groove 550 T 005 M 2 F0 B 1 F 02 Basic Part No. Cable Entry Dash No. (Table II) Cable Entry Style T = Top S = Side E = End E = Strain Relief, G = Gland Nut Basic Part Number Jackscrew Type (Page A-4) Finish Symbol (Page 3) Receptacle Mounting (Right Page) CC = Cable-to-Cable Mounting F0 = Front Mounting R1-R9 = Rear Mounting 1.060 (26.9) Max 0 = Without EMI Gasket, 1 = With EMI Gasket Shell Size (Table I) H Cable Range 1. Metric dimensions (mm) are indicated in parentheses. 2. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. 3. Overall shield thickness range: Max to .031 (0.8) Shell I.D. S SIDE ENTRY 1.280 (32.5) Max Style E Strain Relief 1.060 (26.9) Max .573 (14.6) .140/.130 (3.6/3.3) .079 (2.01) T TOP ENTRY EMI Gasket (Optional) J Shell I.D. E END ENTRY Style G Gland Nut Accomodates MS3109-MS3117, M85049/68 Lipped Type Shrink Boots TABLE I: SHELL SIZE & ENTRY STYLE Com’l Entry Style Entry Style Shell Shell T (Ref) E Size Size Ref Shell I.D. Shell I.D. 1 E/09 .250 (6.4) .375 (9.5) 2 A/15 .375 (9.5) .375 (9.5) 3 B/25 .475 (12.1) .475 (12.1) 4 C/37 .475 (12.1) .475 (12.1) 5 D/50 .575 (14.6) .575 (14.6) 6* F/104 1.000 (25.4) n/a * Shell Size 6 Available in Top Entry Only. © 2004 Glenair, Inc. TABLE II: BACKSHELL DIMENSIONS & CABLE ENTRY Dash No. 02 03 04 05 06 07* 08* H J Cable Range Min Max Max Max .968 (24.6) .515 (13.1) .125 (3.2) .250 (6.4) 1.046 (26.6) .640 (16.3) .250 (6.4) .375 (9.5) 1.156 (29.4) .765 (19.4) .312 (7.9) .500 (12.7) 1.218 (30.9) .920 (23.4) .437 (11.1) .625 (15.9) 1.343 (34.1) 1.015 (25.8) .562 (14.3) .750 (19.1) 1.468 (37.3) 1.140 (29.0) .687 (17.4) .875 (22.2) 1.593 (40.5) 1.265 (32.1) .812 (20.6) 1.000 (25.4) * Available in Shell Size 6 Only CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-18 MIL-C-24308 D-Subminiature D-Subminiature Split Backshells Standard Dimensions Termination Type P Jackscrew Types B, D, E, H, K (Page A-4) Jackscrew Types B, D, E, H, K (Page A-4) R F S - SIDE ENTRY E F Jackscrew Types B, D, H, K and J Only (Page A-4) T - TOP ENTRY E Shrink Sleeve (As Required) Termination Type E - END ENTRY A D C G E B .12 (3.0) Ref. A COMMON CONNECTOR/SHELL INTERFACE & BACKSHELL DIMENSIONS Com’l Shell Shell Size Ref Size E/09 1 A/15 2 B/25 3 C/37 4 D/50 5 F/104 6 A Max 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) B Max .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) D C Ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) ±.005 .984 1.312 1.852 2.500 2.406 2.500 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) .730 1.050 1.594 2.240 2.140 2.240 P (18.5) (26.7) (40.5) (56.9) (54.4) (56.9) R Ref .719 (18.3) .719 (18.3) .938 (23.8) .938 (23.8) .938 (23.8) 1.094 (27.8) CABLE MOUNTING AND BACKSHELL DIMENSIONS Panel Dash No. Thickness n/a CC n/a F0 .031 (.8) R1 .047 (1.2) R2 .062 (1.6) R3 .093 (2.4) R4 .104 (2.6) R5 .125 (3.2) R6 .156 (4.0) R7 .135 (3.4) R8 .188 (4.8) R9 E .174 (4.4) .343 (8.7) .247 (6.3) .231 (5.9) .216 (5.5) .185 (4.7) .174 (4.4) .153 (3.9) .125 (3.2) .140 (3.6) .094 (2.4) Sizes 1 & 2 1.451 (36.9) 1.625 (41.3) 1.525 (38.7) 1.509 (38.3) 1.500 (38.1) 1.470 (37.3) 1.451 (36.9) 1.430 (36.3) 1.400 (35.6) 1.417 (36.0) 1.368 (34.7) F + .031 (0.79) Sizes 3 - 5 1.671 (42.4) 1.844 (46.8) 1.745 (44.3) 1.728 (43.9) 1.720 (43.7) 1.690 (42.9) 1.671 (42.4) 1.650 (41.9) 1.620 (41.1) 1.637 (41.6) 1.590 (40.4) Size 6 1.820 (46.2) 2.000 (50.8) 1.890 (48.0) 1.875 (47.6) 1.860 (47.2) 1.829 (46.5) 1.820 (46.2) 1.798 (45.7) 1.767 (44.9) 1.805 (45.8) 1.740 (44.2) G + .031 (0.79) Sizes 1 & 2 Sizes 3 - 5 1.583 (40.2) 1.831 (46.5) 1.750 (44.5) 2.000 (50.8) 1.656 (42.1) 1.904 (48.4) 1.640 (41.7) 1.888 (48.0) 1.625 (41.3) 1.873 (47.6) 1.594 (40.5) 1.842 (46.8) 1.583 (40.2) 1.831 (46.5) 1.563 (39.7) 1.811 (46.0) 1.531 (38.9) 1.781 (45.2) 1.550 (39.4) 1.798 (45.7) 1.500 (38.1) 1.750 (44.5) 1. Metric dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-19