VISHAY CWR11DH106KB

CWR11
www.vishay.com
Vishay Sprague
Solid Tantalum Surface Mount Chip Capacitors
TANTAMOUNT® Molded Case, Military MIL-PRF-55365/8 Qualified
FEATURES
•
•
•
•
•
PERFORMANCE/ELECTRICAL
CHARACTERISTICS
Weibull failure rate codes B, C, D and T
Surge current options A, B and C
Termination: H = Solder plated, K = Solder fused
Molded case available in four case codes
Compatible with “High Volume” automatic pick and place
equipment
APPLICATIONS
• Military/aerospace
• General purpose
• High reliability
www.vishay.com/doc?40088
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 0.10 μF to 100 μF
Capacitance Tolerance: ± 5 %, ± 10 %, ± 20 %
Voltage Rating: 4 VDC to 50 VDC
ORDERING INFORMATION
CWR11
D
H
155
K
B
A
/HR
TYPE
VOLTAGE
TERMINATION
FINISH
CAPACITANCE
CAPACITANCE
TOLERANCE
FAILURE RATE
%/1000 h
SURGE CURRENT
(OPTIONAL)
PACKAGING
OPTION
C=4V
D=6V
F = 10 V
H = 15 V
J = 20 V
K = 25 V
M = 35 V
N = 50 V
H = Solder
plated
K = Solder
fused
This is expressed
in picofarads.
The first two digits
are the significant
figures. The third
is the number of
zeros to follow.
J=±5%
K = ± 10 %
M = ± 20 %
M = 1.0
P = 0.1
R = 0.01
S = 0.001
B = 0.1
C = 0.01
D = 0.001
T = 0.01 (1)
A = 3 cycles
at + 25 °C
B = 3 cycles
at - 55 °C/+ 85 °C
C = 3 cycles
at - 55 °C/+ 85 °C
(before Weibull
grading)
Blank = Full reel
/PR = 100 pcs reel
/HR = half reel
/PT = Bulk,
plastic tray
/FA = Waffle pack
Note
(1) T level capacitors are recommended for “Space applications”. Shipped in tape and reel/or waffle packaging only.
DIMENSIONS in inches [millimeters]
L
H
W
TW
Glue Pad
TH MIN.
Glue Pad
CASE CODE
EIA SIZE
A
3216-18
B
3528-21
C
6032-28
D
7343-31
L
0.126 ± 0.008
[3.2 ± 0.20]
0.138 ± 0.008
[3.5 ± 0.20]
0.236 ± 0.012
[6.0 ± 0.30]
0.287 ± 0.012
[7.3 ± 0.30]
W
0.063 ± 0.008
[1.6 ± 0.20]
0.110 ± 0.008
[2.8 ± 0.20]
0.126 ± 0.012
[3.2 ± 0.30]
0.170 ± 0.012
[4.3 ± 0.30]
H
0.063 ± 0.008
[1.6 ± 0.20]
0.075 ± 0.008
[1.9 ± 0.20]
0.098 ± 0.012
[2.5 ± 0.30]
0.110 ± 0.012
[2.8 ± 0.30]
P
0.031 ± 0.012
[0.80 ± 0.30]
0.031 ± 0.012
[0.80 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
TW
0.047 ± 0.004
[1.2 ± 0.10]
0.087 ± 0.004
[2.2 ± 0.10]
0.087 ± 0.004
[2.2 ± 0.10]
0.095 ± 0.004
[2.4 ± 0.10]
P
TH MIN.
0.028
[0.70]
0.028
[0.70]
0.039
[1.0]
0.039
[1.0]
Note
• Glue pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option).
Revision: 26-Jun-13
Document Number: 40011
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CWR11
www.vishay.com
Vishay Sprague
RATINGS AND CASE CODES
μF
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
4V
6V
10 V
A
A
A
B
B
B
A
A
A
B
B
B
C
C
A
A
B
B
B
20 V
A
A
A
B
B
B
A
A
A
B
B
B
C
C
25 V
D
D
D
D
D
D
35 V
A
A
A
A
B
B
B
C
C
C
D
D
A
A
B
B
B
C
C
C
D
D
D
C
C
C
D
D
15 V
D
D
50 V
A
B
B
B
C
C
C
D
D
D
D
MARKING
Capacitance
Capacitance Code, pF
Polarity (+)
Band
105
J
"JAN" Brand
35
Voltage
B, C and D Case Sizes
105J
2
Vishay Sprague Logo
Polarity (+)
Band
"JAN" Brand
A Case Size
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
2.2
4.7
6.8
10
15
33
68
100
A
A
B
B
B
C
D
D
1.5
2.2
3.3
A
A
A
MAX. DC LEAKAGE (μA) AT
PART NUMBER
+ 25 °C
+ 85 °C
MAX. DF 120 Hz (%) AT
+ 85 °C
+ 125 °C + 25 °C
+ 125 °C
4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C
CWR11C(5)225(1)(2)(3)(4)
0.5
5.0
6.0
CWR11C(5)475(1)(2)(3)(4)
0.5
5.0
6.0
CWR11C(5)685(1)(2)(3)(4)
0.5
5.0
6.0
CWR11C(5)106(1)(2)(3)(4)
0.5
5.0
6.0
CWR11C(5)156(1)(2)(3)(4)
0.6
6.0
7.2
CWR11C(5)336(1)(2)(3)(4)
1.3
13.0
15.6
CWR11C(5)686(1)(2)(3)(4)
2.7
27.0
32.4
CWR11C(5)107(1)(2)(3)(4)
4.0
40.0
48.0
6 VDC AT + 85 °C; 4 VDC AT + 125 °C
CWR11D(5)155(1)(2)(3)(4)
0.5
5.0
6.0
CWR11D(5)225(1)(2)(3)(4)
0.5
5.0
6.0
CWR11D(5)335(1)(2)(3)(4)
0.5
5.0
6.0
- 55 °C
MAX. ESR
AT + 25 °C
100 kHz ()
6
6
6
6
6
6
6
8
9
9
9
9
9
9
9
12
9
9
9
9
9
9
9
12
8.0
8.0
5.5
4.0
3.5
2.2
1.1
0.9
6
6
6
9
6
9
9
9
9
8.0
8.0
8.0
Note
• Part number definitions:
(1) Capacitance tolerance: J, K, M
(2) Failure rate: B, C, D, M, P, R, S, T
Exponential failure rate levels M, P, R, and S are inactive for new design per MIL-PRF-55365
Capacitors qualified to Weibull failure rate levels are substitutable for exponential failure rate levels
(3) Surge current (optional): A, B, C
(4) Packaging: Blank, /HR, /PR, /PT
(5) Termination: K - solder plated, H - solder fused
Revision: 26-Jun-13
Document Number: 40011
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CWR11
www.vishay.com
Vishay Sprague
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
4.7
6.8
10
15
22
47
68
B
B
B
C
C
D
D
1.0
1.5
2.2
3.3
4.7
6.8
15
33
47
A
A
A
B
B
B
C
D
D
0.68
1.0
1.5
2.2
3.3
4.7
10
22
33
A
A
A
B
B
B
C
D
D
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
15
22
A
A
A
B
B
B
C
C
D
D
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
15
A
A
B
B
B
C
C
C
D
D
D
MAX. DC LEAKAGE (μA) AT
PART NUMBER
+ 25 °C
+ 85 °C
MAX. DF 120 Hz (%) AT
+ 85 °C
+ 125 °C + 25 °C
+ 125 °C
6 VDC AT + 85 °C; 4 VDC AT + 125 °C
CWR11D(5)475(1)(2)(3)(4)
0.5
5.0
6.0
CWR11D(5)685(1)(2)(3)(4)
0.5
5.0
6.0
CWR11D(5)106(1)(2)(3)(4)
0.6
6.0
7.2
CWR11D(5)156(1)(2)(3)(4)
0.9
9.0
10.8
CWR11D(5)226(1)(2)(3)(4)
1.4
14.0
16.8
CWR11D(5)476(1)(2)(3)(4)
2.8
28.0
33.6
CWR11D(5)686(1)(2)(3)(4)
4.3
43.0
51.6
10 VDC AT + 85 °C; 7 VDC AT + 125 °C
CWR11F(5)105(1)(2)(3)(4)
0.5
5.0
6.0
CWR11F(5)155(1)(2)(3)(4)
0.5
5.0
6.0
CWR11F(5)225(1)(2)(3)(4)
0.5
5.0
6.0
CWR11F(5)335(1)(2)(3)(4)
0.5
5.0
6.0
CWR11F(5)475(1)(2)(3)(4)
0.5
5.0
6.0
CWR11F(5)685(1)(2)(3)(4)
0.7
7.0
8.4
CWR11F(5)156(1)(2)(3)(4)
1.5
15.0
18.0
CWR11F(5)336(1)(2)(3)(4)
3.3
33.0
39.6
CWR11F(5)476(1)(2)(3)(4)
4.7
47.0
56.4
15 VDC AT + 85 °C; 10 VDC AT + 125 °C
CWR11H(5)684(1)(2)(3)(4)
0.5
5.0
6.0
CWR11H(5)105(1)(2)(3)(4)
0.5
5.0
6.0
CWR11H(5)155(1)(2)(3)(4)
0.5
5.0
6.0
CWR11H(5)225(1)(2)(3)(4)
0.5
5.0
6.0
CWR11H(5)335(1)(2)(3)(4)
0.5
5.0
6.0
CWR11H(5)475(1)(2)(3)(4)
0.7
7.0
8.4
CWR11H(5)106(1)(2)(3)(4)
1.6
16.0
19.2
CWR11H(5)226(1)(2)(3)(4)
3.3
33.0
39.6
CWR11H(5)336(1)(2)(3)(4)
5.3
53.0
63.6
20 VDC AT + 85 °C; 13 VDC AT + 125 °C
CWR11J(5)474(1)(2)(3)(4)
0.5
5.0
6.0
CWR11J(5)684(1)(2)(3)(4)
0.5
5.0
6.0
CWR11J(5)105(1)(2)(3)(4)
0.5
5.0
6.0
CWR11J(5)155(1)(2)(3)(4)
0.5
5.0
6.0
CWR11J(5)225(1)(2)(3)(4)
0.5
5.0
6.0
CWR11J(5)335(1)(2)(3)(4)
0.7
7.0
8.4
CWR11J(5)475(1)(2)(3)(4)
1.0
10.0
12.0
CWR11J(5)685(1)(2)(3)(4)
1.4
14.0
16.8
CWR11J(5)156(1)(2)(3)(4)
3.0
30.0
36.0
CWR11J(5)226(1)(2)(3)(4)
4.4
44.0
52.8
25 VDC AT + 85 °C; 17 VDC AT + 125 °C
CWR11K(5)334(1)(2)(3)(4)
0.5
5.0
6.0
CWR11K(5)474(1)(2)(3)(4)
0.5
5.0
6.0
CWR11K(5)684(1)(2)(3)(4)
0.5
5.0
6.0
CWR11K(5)105(1)(2)(3)(4)
0.5
5.0
6.0
CWR11K(5)155(1)(2)(3)(4)
0.5
5.0
6.0
CWR11K(5)225(1)(2)(3)(4)
0.6
6.0
7.2
CWR11K(5)335(1)(2)(3)(4)
0.9
9.0
10.8
CWR11K(5)475(1)(2)(3)(4)
1.2
12.0
14.4
CWR11K(5)685(1)(2)(3)(4)
1.7
17.0
20.4
CWR11K(5)106(1)(2)(3)(4)
2.5
25.0
30.0
CWR11K(5)156(1)(2)(3)(4)
3.8
38.0
45.6
- 55 °C
MAX. ESR
AT + 25 °C
100 kHz ()
6
6
6
6
6
6
6
9
6
9
6
9
6
9
9
9
9
9
9
9
9
5.5
4.5
3.5
3.0
2.2
1.1
0.9
4
6
6
6
6
6
6
6
6
6
6
9
9
9
9
6
9
9
6
9
9
9
9
9
9
9
9
10.0
8.0
8.0
5.5
4.5
3.5
2.5
1.1
0.9
4
4
6
6
6
6
6
6
6
6
6
9
9
8
9
8
8
9
6
6
9
9
9
9
9
9
9
12.0
10.0
8.0
5.5
5.0
4.0
2.5
1.1
0.9
4
4
4
6
6
6
6
6
6
6
6
6
6
9
8
9
8
9
8
9
6
6
6
9
9
9
9
9
9
9
14.0
12.0
10.0
6.0
5.0
4.0
3.0
2.4
1.1
0.9
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
8
9
8
9
9
8
9
6
6
6
6
9
9
9
9
9
9
9
15.0
14.0
7.5
6.5
6.5
3.5
3.5
2.5
1.4
1.2
1.0
Note
• Part number definitions:
(1) Capacitance tolerance: J, K, M
(2) Failure rate: B, C, D, M, P, R, S, T
Exponential failure rate levels M, P, R, and S are inactive for new design per MIL-PRF-55365
Capacitors qualified to Weibull failure rate levels are substitutable for exponential failure rate levels
(3) Surge current (optional): A, B, C
(4) Packaging: Blank, /HR, /PR, /PT
(5) Termination: K - solder plated, H - solder fused
Revision: 26-Jun-13
Document Number: 40011
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CWR11
www.vishay.com
Vishay Sprague
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
A
A
A
A
B
B
B
C
C
C
D
D
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
A
B
B
B
C
C
C
D
D
D
D
MAX. DC LEAKAGE (μA) AT
PART NUMBER
+ 25 °C
+ 85 °C
MAX. DF 120 Hz (%) AT
+ 85 °C
+ 125 °C + 25 °C
+ 125 °C
35 VDC AT + 85 °C; 23 VDC AT + 125 °C
CWR11M(5)104(1)(2)(3)(4)
0.5
5.0
6.0
CWR11M(5)154(1)(2)(3)(4)
0.5
5.0
6.0
CWR11M(5)224(1)(2)(3)(4)
0.5
5.0
6.0
CWR11M(5)334(1)(2)(3)(4)
0.5
5.0
6.0
CWR11M(5)474(1)(2)(3)(4)
0.5
5.0
6.0
CWR11M(5)684(1)(2)(3)(4)
0.5
5.0
6.0
CWR11M(5)105(1)(2)(3)(4)
0.5
5.0
6.0
CWR11M(5)155(1)(2)(3)(4)
0.5
5.0
6.0
CWR11M(5)225(1)(2)(3)(4)
0.8
8.0
9.6
CWR11M(5)335(1)(2)(3)(4)
1.2
12.0
14.4
CWR11M(5)475(1)(2)(3)(4)
1.7
17.0
20.4
CWR11M(5)685(1)(2)(3)(4)
2.4
24.0
28.8
50 VDC AT + 85 °C; 33 VDC AT + 125 °C
CWR11N(5)104(1)(2)(3)(4)
0.5
5.0
12.0
CWR11N(5)154(1)(2)(3)(4)
0.5
5.0
6.0
CWR11N(5)224(1)(2)(3)(4)
0.5
5.0
6.0
CWR11N(5)334(1)(2)(3)(4)
0.5
5.0
6.0
CWR11N(5)474(1)(2)(3)(4)
0.5
5.0
6.0
CWR11N(5)684(1)(2)(3)(4)
0.5
5.0
6.0
CWR11N(5)105(1)(2)(3)(4)
0.5
5.0
6.0
CWR11N(5)155(1)(2)(3)(4)
0.8
8.0
9.6
CWR11N(5)225(1)(2)(3)(4)
1.1
11.0
13.2
CWR11N(5)335(1)(2)(3)(4)
1.7
17.0
20.4
CWR11N(5)475(1)(2)(3)(4)
2.4
24.0
28.8
- 55 °C
MAX. ESR
AT + 25 °C
100 kHz ()
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
9
6
6
6
6
6
6
6
9
9
9
9
9
24.0
21.0
18.0
15.0
10.0
8.0
6.5
4.5
3.5
2.5
1.5
1.3
6
4
4
4
4
4
4
6
6
6
6
8
6
6
6
6
6
6
8
8
9
9
8
6
6
6
6
6
6
9
9
9
9
22.0
17.0
14.0
12.0
8.0
7.0
6.0
4.0
2.5
2.0
1.5
Note
• Part number definitions:
(1) Capacitance tolerance: J, K, M
(2) Failure rate: B, C, D, M, P, R, S, T
Exponential failure rate levels M, P, R, and S are inactive for new design per MIL-PRF-55365
Capacitors qualified to Weibull failure rate levels are substitutable for exponential failure rate levels
(3) Surge current (optional): A, B, C
(4) Packaging: Blank, /HR, /PR, /PT
(5) Termination: K - solder plated, H - solder fused
RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 °C)
STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS
Capacitor Voltage Rating
4.0
6.0
10
15
20
25
35
50
SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS
Capacitor Voltage Rating
4.0
6.0
10
15
20
25
35
50
Revision: 26-Jun-13
Operating Voltage
2.5
3.6
6.0
10
12
15
24
28
Operating Voltage
2.5
3.0
5.0
7.5
10
12
15
24
Document Number: 40011
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CWR11
www.vishay.com
Vishay Sprague
TAPE AND REEL PACKAGING in inches [millimeters]
0.157 ± 0.004
[4.0 ± 0.10]
T2
(max.)
Deformation
between
embossments
0.024
[0.600]
max.
0.059 + 0.004 - 0.0
[1.5 + 0.10 - 0.0]
Top
cover
tape
A0
K0
B1 (max.) (6)
Top
cover
tape
For tape feeder
reference only
including draft.
Concentric around B0
0.004 [0.10]
max.
10 pitches cumulative
tolerance on tape
± 0.008 [0.200]
Embossment
0.079 ± 0.002
0.069 ± 0.004
[2.0 ± 0.05]
[1.75 ± 0.10]
0.030 [0.75]
min. (3)
B0
F
W
20°
Maximum
component
rotation
0.030 [0.75]
min. (4)
(Side or front sectional view)
Center lines
of cavity
P1
USER DIRECTION
OF FEED
D1 (min.) for components
(5)
.
0.079 x 0.047 [2.0 x 1.2] and larger
Maximum
cavity size (1)
Cathode (-)
Bending radius (2)
DIRECTION OF FEED
3.937 [100.0]
20° maximum
component rotation
Typical
component
cavity
center line
B0
A0
(Top view)
Typical
component
center line
R minimum:
8 mm = 0.984" (25 mm)
12 mm and 16 mm = 1.181" (30 mm)
R
min.
Anode (+)
0.039 [1.0]
max.
Tape
0.039 [1.0]
max.
0.9843 [250.0]
Camber
(Top view)
Allowable camber to be 0.039/3.937 [1/100]
Non-cumulative over 9.843 [250.0]
Tape and reel specifications: All case sizes are
available on plastic embossed tape per EIA-481.
Standard reel diameter is 7" (178 mm).
Notes
• Metric dimensions will govern. Dimensions in inches are rounded and for reference only.
(1) A , B , K , are determined by the maximum dimensions to the ends of the terminals extending from the component body and/or the body
0
0
0
dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the
cavity (A0, B0, K0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent
rotation of the component within the cavity of not more than 20°.
(2) Tape with components shall pass around radius “R” without damage. The minimum trailer length may require additional length to provide
“R” minimum for 12 mm embossed tape for reels with hub diameters approaching N minimum.
(3) This dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between the embossed
cavities or to the edge of the cavity whichever is less.
(4) This dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier
tape between the embossed cavity or to the edge of the cavity whichever is less.
(5) The embossed hole location shall be measured from the sprocket hole controlling the location of the embossement. Dimensions of
embossement location shall be applied independent of each other.
(6) B dimension is a reference dimension tape feeder clearance only.
1
CARRIER TAPE DIMENSIONS in inches [millimeters]
CASE CODE
TAPE SIZE
B1 (max.)
D1 (min.)
F
P1
T2 (max.)
W
A, B
8 mm
0.165
[4.2]
0.039
[1.0]
0.138 ± 0.002
[3.5 ± 0.05]
0.157 ± 0.004
[4.0 ± 0.1]
0.094
[2.4]
0.315 + 0.012
[8.0 ± 0.30]
C, D
12 mm
0.323
[8.2]
0.059
[1.5]
0.217 ± 0.002
[5.5 ± 0.05]
0.315 ± 0.004
[8.0 ± 1.0]
0.177
[4.5]
0.472 ± 0.012
[12.0 ± 0.30]
Revision: 26-Jun-13
Document Number: 40011
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CWR11
www.vishay.com
Vishay Sprague
PAD DIMENSIONS in inches [millimeters]
B
D
C
A
A
(min.)
CASE CODE
B
(nom.)
C
(nom.)
D
(nom.)
A
0.071 [1.80]
0.067 [1.70]
0.053 [1.35]
0.187 [4.75]
B
0.118 [3.00]
0.071 [1.80]
0.065 [1.65]
0.207 [5.25]
C
0.118 [3.00]
0.094 [2.40]
0.118 [3.00]
0.307 [7.80]
D
0.157 [4.00]
0.098 [2.50]
0.150 [3.80]
0.346 [8.80]
POWER DISSIPATION
CASE CODE
MAXIMUM PERMISSIBLE POWER DISSIPATION
AT + 25 °C (W) IN FREE AIR
A
0.075
B
0.085
C
0.110
D
0.150
STANDARD PACKAGING QUANTITY
CASE CODE
UNITS PER REEL
7" REEL
HALF 7" REEL (/HR)
PARTIAL 7" REEL (/PR)
BULK, PLASTIC
TRAY QUANTITIES
A
2000
1000
100
50
B
2000
1000
100
50
C
500
250
100
50
D
500
250
100
50
Notes
• Bulk capacitors are shipped in plastic trays
• T level capacitors are only shipped in tape and reel/or waffle packaging
Contact factory for waffle pack quantities
PRODUCT INFORMATION
COTS Guide
Pad Dimensions
www.vishay.com/doc?40083
Packaging Dimensions
Moisture Sensitivity
www.vishay.com/doc?40135
SELECTOR GUIDES
Solid Tantalum Selector Guide
www.vishay.com/doc?49053
Solid Tantalum Chip Capacitors
www.vishay.com/doc?40091
FAQ
Frequently Asked Questions
Revision: 26-Jun-13
www.vishay.com/doc?40110
Document Number: 40011
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000