VISHAY EC200-503

EC
Vishay ESTA
High Voltage DC Filter Capacitors
TYPE DESCRIPTION
PART NUMBER
TYPE EC
The EC range of capacitors are similar in design to the ET
range but are housed in a more robust container. They are
manufactured using a mixed dielectric material that consists
of polyester/polypropylene film and capacitor tissue. They
are impregnated and filled with a mineral oil. The container
is a Synthetic Resin Bonded Paper (SRBP) tube sealed at
both ends with resin assuring a hermetic seal. The
capacitors may be used in air, oil or SF6. They are
terminated with M6 studs x 15 mm long or tinned copper
wire.
Note
• The impregnant used is a non toxic highly purified and inhibited
mineral oil
APPLICATIONS
The EC range of capacitors are specifically designed for
high voltage filters and can be sucessfully used in the
following applications:
• High voltage smoothing
• Induction heating
• RT transmitter power supplies
• X-ray power supplies
TEMPERATURE RANGE
Temperature range is - 40 °C to + 85 °C. Derating is required
for operation at higher temperatures.
TEMPERATURE COEFFICIENT
Capacitance will increase by 2 % per 100 °C temperature
rise.
CAPACITANCE RANGE
0.001 μF to 2 μF. The tolerance is ± 10 %. Other tolerance
are available on request. Normal values measured at 1 kHz.
VOLTAGE RANGE
1000 VDC to 100 000 VDC
10 kV
EC100-104
EC100-254
EC100-504
20 kV
EC200-503
EC200-104
EC200-254
EC200-504
30 kV
EC300-253
EC300-503
EC300-104
EC300-254
40 kV
EC400-253
EC400-503
EC400-104
EC400-124
50 kV
EC500-103
EC500-253
EC500-503
EC500-104
60 kV
EC600-502
EC600-103
EC600-253
EC600-503
EC600-104
80 kV
EC800-502
EC800-103
EC800-253
EC800-503
100 kV
EC1000-502
EC1000-103
EC1000-253
120 kV
EC1200-502
CAP.
μF
L
mm
D
mm
0.1
0.25
0.5
115
140
205
65
75
95
0.05
0.1
0.25
0.5
180
230
280
360
65
65
75
95
0.025
0.05
0.1
0.25
245
320
395
510
65
65
65
75
0.025
0.05
0.01
0.12
305
410
345
440
65
65
95
95
0.01
0.025
0.05
0.1
270
335
430
430
65
65
75
95
0.005
0.01
0.025
0.05
0.1
310
310
390
500
615
65
75
75
75
95
0.005
0.01
0.025
0.05
400
400
500
650
65
75
95
95
0.005
0.01
0.025
485
485
610
65
75
95
0.005
425
75
DIMENSIONS in millimeters
TEST VOLTAGE
Terminal/terminal (Vt/t)
L
15
For DC rating < 20 kV
Vt/t = 2.0 x rated voltage 60 s
D
15
5
For DC rating > 20 kV
Vt/t = 1.5 x rated voltage 60 s
Document Number: 13015
Revision: 11-Aug-10
For technical questions, contact: [email protected]
www.vishay.com
1
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1