o Part Numbering Trimmer Potentiometers (Part Number) PV Z3 A 103 q w e r C01 R00 t y rTotal Resistance qProduct ID Product ID PV Trimmer Potentiometers wSeries Expressed by three figures. The unit is ohm. The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. Ex.) Code eAdjustment Direction /Lead Type Adjustment Direction/ Lead Type Code Series Code Z2 SMD Open 2mm Size Carbon Resistive Element A Top R Rear A2 SMD Open 2mm Size Z3 SMD Open 3mm Size Carbon Resistive Element Total Resistance 100 10Ω 102 1000Ω 104 100000Ω (=100kΩ) tIndividual Specification A Top Series Code Individual Specification Code A Top PVA2 A01 Standard Type G Top H Top PVZ2 C04 Standard Type (High-heat Resistance Type/Ultra-thin Type) C01 Standard Type (High-heat Resistance Type/Top Adjustment) F01 High Characteristic Carbon Type (only PVZ3G) E01 High-heat Resistance Type (for Rear Adjustment) K Rear A Top, J-hook G3 SMD Sealed 3mm Size G Top, Gull-wing M4 SMD Sealed 4mm Size A Top G5 SMD Sealed 5mm Square 11 turns A Top H Side 32 Lead Sealed 6mm Round Single turn H Top, Triangle N Side, Triangle 12 Lead Sealed 7mm Round 4 turns P Top, Triangle T Side, Triangle 36 Lead Sealed 10mm Square 25 turns W 37 Lead Sealed 6mm Square 12 turns X Side, Triangle PVZ3 C01 Standard Type D01 High-reliability Type PV32/PV12 A01 Standard Type Top, Inline PVG3/ PV36/PV37 C01 Standard Type X Side, Inline PVG5 C03 Standard Type W Top, Triangle PVM4 yPackaging Code Packaging B00 Bulk R00 Reel