BYV95 AND BYV96 SERIES MINIATURE GLASS PASSIVATED FAST SWITCHING RECTIFIER Reverse Voltage - 200 to 1000 Volts D * FEATURES ♦ High temperature metallurgically bonded construction ♦ Hermetically sealed package ♦ Glass passivated cavity-free junction ♦ 1.5 Ampere operation at TA=55°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension T E DO-204AP N E P A T Forward Current - 1.5 Amperes 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.240 (6.1) MAX. 0.150 (3.8) 0.100 (2.5) DIA. 1.0 (25.4) MIN. MECHANICAL DATA Case: JEDEC DO-204AP solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.02 ounce, 0.56 gram Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS BYV95A BYV95B BYV95C BYV96D BYV96E Maximum recurrent peak reverse voltage VRRM 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 200 400 600 800 1000 Volts Minimum avalanche breakdown voltage at 100µA V(BR) 300 500 700 900 1100 Volts Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=55°C I(AV) 1.5 Amps Peak forward surge current, 10ms single half sinewave superimposed on rated load at TJ=165°C IFSM 35.0 Amps VF 1.6 1.35 Volts Maximum instantaneous forward voltage at 1.5A TJ =25°C TJ=165°C Maximum full load reverse current, full cycle average, 0.375”, (9.5mm) TJ=25°C lead length at TJ=165°C Maximum DC reverse current at rated DC blocking voltage UNITS IR(AV) 1.0 150.0 µA IR 2.0 µA Maximum reverse recovery time (NOTE 1) trr Typical junction capacitance (NOTE 2) CJ 10.0 pF RΘJA 55.0 °C/W TJ -65 to +175 °C TSTG -65 to +200 °C Typical thermal resistance (NOTE 3) Operating junction temperature range Storage temperature range NOTES: (1) Measured with IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted 4/98 250 300 ns RATINGS AND CHARACTERISTIC CURVES BYV95 AND BYV96 SERIES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 35 2.0 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE 1.5 1.0 0.5 0.375" (9.5mm) LEAD LENGTH 0 25 50 75 100 125 150 TJ=165°C 10ms SINGLE HALF SINE-WAVE 30 25 20 15 10 175 100 NUMBER OF CYCLES AT 50 HZ FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 10 10 TJ=100°C TJ=25°C 1 PULSE WIDTH=300µs 1% DUTY CYCLE 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 1 AMBIENT TEMPERATURE, °C TJ=125°C 1 TJ=75°C 0.1 TJ=25°C 0.01 0 FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHZ Vsig=50mVp-p 10 1 10 REVERSE VOLTAGE, VOLTS 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 30 1 20 100 100