IDCP-3722 Vishay Dale High Current, Surface Mount Inductor FEATURES • High energy storage. • Low resistance. • Tape and reel packaging for automatic handling. ELECTRICAL SPECIFICATIONS MATERIALS Inductance Range: 10.0µH to 820µH. Inductance Tolerance: 20%. Operating Temperature: - 25°C to + 105°C. Storage Temperature: - 40°C to 125°C. Resistance to Solder Heat: 260°C for 10 seconds. Core: Ferrite. Wire: Enamelled copper wire. Terminal: Ag + Ni + Sn/Pb. DIMENSIONS in inches [millimeters] STANDARD ELECTRICAL SPECIFICATIONS INDUCTANCE (µH) TEST FREQUENCY L DCR MAXIMUM (Ohms) B RATED DC CURRENT* (A) 10.0 2.52MHz 0.06 2.60 12.0 2.25MHz 0.07 2.45 15.0 2.25MHz 0.08 2.27 18.0 2.25MHz 0.09 2.15 22.0 2.25MHz 0.10 1.95 27.0 2.25MHz 0.11 1.76 33.0 2.25MHz 0.12 1.50 39.0 2.25MHz 0.14 1.37 47.0 2.25MHz 0.17 1.28 56.0 2.25MHz 0.19 1.17 68.0 2.25MHz 0.22 1.11 82.0 2.25MHz 0.25 1.00 100.0 1KHz 0.35 0.97 120.0 1KHz 0.40 0.89 150.0 1KHz 0.47 0.78 180.0 1KHz 0.63 0.72 220.0 1KHz 0.73 0.66 270.0 1KHz 0.97 0.57 330.0 1KHz 1.15 0.52 390.0 1KHz 1.30 0.48 470.0 1KHz 1.48 0.42 560.0 1KHz 1.90 0.33 680.0 1KHz 2.25 0.28 820.0 1KHz 2.55 0.24 *Rated Current: Value obtained when current flows and the temperature has risen 40°C or when DC current flows and the initial value of inductance has fallen by 10%, whichever is smaller. A C D F E E TYPICAL PAD LAYOUT DESCRIPTION A B C 0.394 ± 0.02 [10.0 ± 0.4] 0.213 ± 0.02 [5.4 ± 0.4] 0.355 ± 0.02 [9.0 ± 0.4] IDCP-3722 10µH ± 20% D E F MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE 0.374 [9.5] 0.148 [3.75] 0.099 [2.5] SAP PART NUMBERING GUIDELINES (INTERNAL) I D C P 3 7 PRODUCT FAMILY 2 SIZE 2 N B 1 PACKAGE CODE 0 0 INDUCTANCE VALUE M TOL. See the end of this data book for conversion tables Document Number 34090 Revision 11-Aug-04 For technical questions, contact [email protected] www.vishay.com 41