SGBJ15D thru SGBJ15M Glass Passivated Single Phase Bridge Rectifiers Case GBJ 4.6 ± 0.2 1± 0.1 3.2 ± 0.2 3.5 ± 0.2 11± 0.2 20 ± 0.3 2.2 ± 0.2 Features 17.5 ± 0.5 5 + 4 ± 0.2 2.5 ± 0.2 Reverse Voltage 200 to 1000V Forward current 15 Amp 3.6 ± 0.2 30 ± 0.3 0.7 ± 0.1 7.5 7.5 10 ± 0.2 ± 0.2 ± 0.2 2.7 ± 0.2 Dimensions in millimeters SMSC Catalog Number Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage SGBJ15D 200V 140V 200V SGBJ15G 400V 280V 400V SGBJ15J 600V 420V 600V SGBJ15K 800V 560V 800V SGBJ15M 1000V 700V 1000V Glass passivated die construction Ideal for printed circuit boards Plastic material used carries UL flammability recognition 94V-0 High surge current capability High case dielectric strength of 1500 VRMS High temperature soldering guaranteed: 265OC /10 seconds, 0.375” (9.5mm) lead length, 5lbs. (2.3kg) tension Mechanical Data Case: Molded plastic case Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Marked on Body Mounting Position: Any Weight: 0.26 oz., 7.0 g Maximum Ratings and Thermal Characteristics (TA = 25OC unless otherwise noted) Maximum average forward output rectified current Tc = 100OC IF(AV) 15 Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) IFSM 200 A I2t 166 A2sec O Rating for fusing (t<8.3ms) Maximum thermal resistance per leg R JA 22(1) R JC 1.5(2) A C/W O Operating Junction and storage temperature range Tj, TSTG -55 to +150 C Mounting Torque (Recommended torque:0.5 N.m) TOR 0.8 N.m Maximum Instantaneous Forward Voltage per leg VF 1.0V IFM =7.5A Maximum DC reverse current at rated DC blocking voltage per leg IR 5.0 A TA = 25OC 500 A TA = 125OC Electrical Characteristics (TA = 25 C unless otherwise noted) O Notes: (1) (2) (3) Junction to ambient without heatsink Junction to case with heatsink Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw Document Number : SGBJ15D Mar 31, 2005 67 www.smsemi.com SGBJ15D thru SGBJ15M IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 20 15 10 5 0 0 50 100 150 100 Tj = 25°C 10 1.0 Pulse width = 300µs 0.1 0.2 0.0 T, TEMPERATURE (°C) 1.0 1.4 100 200 Tj = 25°C f = 1MHz Tj = 150°c Single Half Sine Wave (JEDEC Method) Cj, CAPACITANCE (pF) 160 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Fwd Characteristics Fig. 1 Forward Current Derating Curve IFSM , PEAK FWD SURGE CURRENT (A) 0.6 120 80 10 40 1 0 1 10 1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 3 Max Non-Repetitive Peak Fwd Surge Current Fig. 4 Typical Junction Capacitance IR, INSTANTANEOUS REVERSE CURRENT (µA) NUMBER OF CYCLES AT 60 Hz 1000 100 10 Tj = 100°C 1.0 0.1 Tj = 25°C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics Document Number : SGBJ15D Mar 31, 2005 68 www.smsemi.com