BOURNS SLN10A-5SA

Features
■
■
■
■
■
■
Low output ripple
10 amp output current
92 % efficiency
Low 0.5 ˝ profile
Power good
Remote sense
■
■
■
■
■
■
Adjustable Vout
Short-circuit protection with auto-restart
Fast transient response
High-temperature operation
Remote enable
Output precharge capability
SLN10A-5SA Series – Power Module
General Information
The SLN10A adds a new meaning to low
cost DC-DC converters. This non-isolated
SIP uses a 5 V input to provide 10 Amps of
output current at voltages ranging from
0.8 V to 2.5 V. The SLN10A output is
adjustable by the user to provide any
voltage within its range. Its extra low 0.8 V
output will power even the latest in ASICs,
microprocessors, and DSPs.
The SLN10A has an industry standard pinout, is 2 inches long, and only 0.5 inches
high. Its total footprint is a space saving
0.75 in2. Features include Enable/Disable,
output voltage trim, remote sense, short
circuit protection with auto-restart, fast
transient response, and high temperature
operation. The SLN10A is one of the most
cost-effective DC-DC converters available.
Standard Options
Nominal
Input
(V)
Input
Voltage
(V)
Output
Voltage
(V)
Output
Current
(A)
Ripple
Max.
(mV pp)
Efficiency
Typ.
(%)
5
4.5 to 5.5
0.8 to 3.5
10
40
90
SLN10A-5SA
Product Dimensions
50.8
(2.0)
7.6
(0.3)
12.4
(0.49)
1 2 3 4 5
0.3
(0.012)
TYP. PIN
THICKNESS
1.8
(0.07)
6 7 8
2.54
(0.100)
1.27
(0.050)
9 10
5.08
(0.2)
3.43 ± 0.38
(0.135 ± .015)
35.6
(1.400)
0.5
(0.020)
TYP. PIN
WIDTH
Input Specifications
Output Specifications
Current ............................................0 to 10 A
Current Limit .................................11 to 18 A
Voltage Setpoint Accuracy
................................±1 %Vnom (nominal)
±2 %Vnom (max.)
optional ................±0.5 %Vnom (nominal)
±1 %Vnom (max.)
Line Regulation ......................±0.1 %Vnom
Load Regulation ....................±0.2 % Vnom
Ripple.............................................20 mV pp
Dynamic Response
50 to 100 % load ..................40 mV Nom.
20 µs Nom.
100 to 50 % load ..................40 mV Nom.
20 µs Nom.
Temperature Regulation
...............................±0.02 %Vout/°C Max.
General Specifications
MBTF .................................2,000 kHrs Nom.
(80 % load, 25 °C)
Operating Temperature........-40 to +100 °C
Storage Temperature...........-55 to +125 °C
Switching Frequency............300 kHz Nom.
PIN DESCRIPTIONS:
1 – Vout
5 – Gnd
2 – Vout
6 – Gnd
3 – Sense
7 – Vin
4 – Vout
8 – Vin
9 – Trim
10 – Enable
DIMENSIONS = MILLIMETERS
(INCHES)
TOLERANCES = (.xx) = ± .25
(.01)
(.xxx) = ± .13
(.005)
Product Schematic
Vin (3.3 V)
+
+
+
7 - Vin
1 - Vout
8 - Vin
2 - Vout
4 - Vout
100 µf
100 µf
+
Vout
+
100 µf
100 µf
3 - REMOTE SENSE
100 µf
9 - TRIM
10 - ENABLE
1. Use low ESR capacitors for VIN and VOUT bypassing.
2. Part is enabled when ENABLE (10) is left floating or
grounded.
3. Apply 2.4 to 5 VDC to ENABLE (10) to disable (shut
down) the part.
4. Use the table above to determine an RTRIM resistor for
the desired voltage.
5. To get an intermediate voltage between 0.800 V and
3.500 V, use the equation at right.
VOUT
3.5
RTRIM (kΩ)
0.182
3.0
5.62
2.5
14.3
2.0
30.1
1.5
68.1
1.0
301
0.8
open
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
5 - GND
6 - GND
Voltage .....................................4.5 VDC Min.
5 VDC Nom.
5.5 VDC Max.
Current .......................................10 A Nom.
Remote Enable
High = Disable.....................2.4 VDC Min.
Low = Enable
..................0.4 VDC max. (open = enable)
Enable/Disable Current ..........250 µA Nom.
Rtrim
SEE TABLE
(
Rtrim = R6 / (Vout / VFB) -1) - R4
WHERE R4 = 23.7K Ohms
R6 = 80.6K Ohms
VFB = 0.800 VDC
SLN10A-5SA Series – Power Module
Efficiency Curve
Temperature Derating
12
96
94
EFFICIENCY (%)
OUTPUT CURRENT (A)
2.5 V
92
90
1.8 V
88
86
1.2 V
84
200
LFM
10
400
LFM
100 LFM
8
0 LFM
6
4
2
82
80
0
0
2
4
6
8
10
0
OUTPUT CURRENT (A)
20
40
60
80
100
AMBIENT TEMPERATURE (°C)
How to Order
S LN 10A - 5 S A
Configuration
Internal Identifier
Current/Power (Amps)
Input Voltage (Volts)
Outputs
S = Single
Output Voltage (V)
A = Adjustable
Reliable Electronic Solutions
Asia-Pacific:
TEL +886- (0)2 25624117 • FAX +886- (0)2 25624116
Europe:
TEL +41-41 768 5555 • FAX +41-41 768 5510
The Americas: TEL +1-951 781-5500 • FAX +1-951 781-5700
www.bourns.com
REV. 12/05
COPYRIGHT© 2005, BOURNS, INC. LITHO IN U.S.A., 2/05