ES2A - ES2D Features • For surface mount applications. • Glass passivated junction. • Low profile package. • Easy pick and place. • Built-in strain relief. • 0.185 (4.699) 0.160 (4.064) 0.083 (2.108) 0.075 (1.905 ) 2 SMB/DO-214AA 0.096 (2.438) 0.083 (2.108) COLOR BAND DENOTES CATHODE Superfast recovery times for high efficiency. Absolute Maximum Ratings* Symbol 0.155 (3.937) 0.130 (3.302) 0.220 (5.588) 0.200 (5.080) 0.050 (1.270) 0.030 (0.762) 2.0 Ampere Superfast Rectifiers IO 1 0.008 (0.203) 0.004 (0.102) 0.012 (0.305) 0.006 (0.152) TA = 25°C unless otherwise noted Parameter Value Units 2.0 A 50 A 1.66 13.3 75 W mW/°C °C/W RθJA Average Rectified Current .375 " lead length @ TA = 110°C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient** RθJL Thermal Resistance, Junction to Lead** 20 °C/W Tstg Storage Temperature Range -50 to +150 °C TJ Operating Junction Temperature -50 to +150 °C if(surge) PD *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on FR-4 PCB 0.013 mm. Electrical Characteristics TA = 25°C unless otherwise noted Parameter Peak Repetitive Reverse Voltage Device Units 2A 2B 2C 2D 50 100 150 200 V Maximum RMS Voltage 35 70 105 140 V DC Reverse Voltage (Rated VR) Maximum Reverse Current @ rated VR TA = 25°C TA = 100°C Maximum Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A Maximum Forward Voltage @ 2.0 A 50 100 150 200 V Typical Junction Capacitance VR = 4.0 V, f = 1.0 MHz 1999 Fairchild Semiconductor Corporation 10 350 20 µA µA nS 0.90 V 18 pF ES2A-ES2D, Rev. A ES2A - ES2D Discrete POWER & Signal Technologies ES2A - ES2D Typical Characteristics Forward Characteristics Forward Current Derating Curve 50 FORWARD CURRENT (A) FORWARD CURRENT (A) 2.5 2 1.5 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.0mm) LEAD LENGTHS 1 0.5 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE ( º C) 10 1 0.1 TA = 25 º C Pulse Width = 300µs 2% Duty Cycle 0.01 0.4 175 1.6 1.8 1000 REVERSE CURRENT ( µ A) PEAK FORWARD SURGE CURRENT (A) 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) Reverse Characteristics Non-Repetitive Surge Current 60 50 40 30 20 10 0 0.6 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 T A = 100 ºC 100 10 T A = 75º C 1 T A = 25º C 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Junction Capacitance 60 CAPACITANCE (pF) 50 40 30 20 10 0 0.1 50Ω NONINDUCTIVE 0.5 1 5 10 20 50 100 REVERSE VOLTAGE (V) 50Ω NONINDUCTIVE +0.5A 500 trr (-) DUT 50V (approx) 50Ω NONINDUCTIVE Pulse Generator (Note 2) 0 -0.25A (+) OSCILLOSCOPE (Note 1) NOTES: 1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf. 2. Rise time = 10 ns max; Source impedance = 50 ohms. -1.0A 1.0cm SET TIME BASE FOR 5/ 10 ns/ cm Reverse Recovery Time Characterstic and Test Circuit Diagram ES2A-ES2D, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.