0.125 X 45O (3.2) Typ 0.600 (15.2) 0.560 (14.3) Features 0.460 (11.7) 0.420 (10.7) • Surge overload rating: 60 amperes peak. • Reliable low cost construction utilizing molded plastic technique. 0.160 (4.1) 0.140 (3.6) 0.060 Typ (1.52) 2.0 Ampere Bridge Rectifiers Symbol 0.500 Min (12.7) 0.600 Min (15.2) KBPM Absolute Maximum Ratings* 0.500 (12.7) 0.460 (11.7) 0.034 (8.6) 0.028 (7.6) Dimensions are in: inches (mm) TA = 25°C unless otherwise noted Parameter Value Units IO Average Rectified Current 2.0 A if(surge) PD Peak Forward Surge Current 60 A RθJA Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient,** per leg 4.7 33 30 W mW/°C °C/W Tstg Storage Temperature Range -55 to +165 °C TJ Operating Junction Temperature -55 to +165 °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on PCB with 0.47 x 0.47" (12 x 12 mm). Electrical Characteristics TA = 25°C unless otherwise noted Parameter Device 005M 253 01M 254 Peak Repetitive Reverse Voltage 50 100 200 400 Maximum RMS Bridge Input Voltage 35 70 140 280 DC Reverse Voltage (Rated VR) Maximum Reverse Leakage, total bridge @ rated VR TA = 25°C TA = 125°C Maximum Forward Voltage Drop, per bridge @ 3.14 A 2 I t rating for fusing t < 8.35 ms 50 100 200 400 600 Typical Junction Capacitance, per leg VR = 4.0 V, f = 1.0 MHz 2000 Fairchild Semiconductor International 02M 255 04M 256 Units 06M 257 08M 258 10M 259 600 800 1000 V 420 560 700 V 800 1000 V 5.0 500 µA µA 1.1 15 V 2 A Sec 25 pF 2KBP005/3N253-2KBP10/3N259, Rev. B 2KBP005M/3N253 - 2KBP10M/3N259 2KBP005M/3N253 - 2KBP10M/3N259 (continued) Typical Characteristics Output Current vs. Ambient Temperature Forward Characteristics 5 FORWARD CURRENT (A) OUTPUT CURRENT (A) 2 1.5 1 0.5 0 20 40 60 80 100 120 140 AMBIENT TEMPERATURE ( º C) TYPICAL DISTRIBUTION 1 MEDIAN 0.1 0.01 160 Reverse Characteristics 0.4 0.6 0.8 1 FORWARD VOLTAGE (V) 1.2 1.4 60 FORWARD SURGE CURRENT (A) REVERSE CURRENT ( µ A) 0.2 Non-Repetitive Surge Current 100 10 TA = 25º C 1 0.1 0 0 20 40 60 80 100 120 NORMALIZED REVERSE VOLTAGE (%) 140 48 36 24 12 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 2KBP005/3N253-2KBP10/3N259, Rev. B 2KBP005M/3N253 - 2KBP10M/3N259 Bridge Rectifiers KBPM Package Dimensions KBPM (FS PKG Code R1) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 1.7 0.125 X 45O (3.2) Typ 0.600 (15.2) 0.560 (14.3) 0.500 (12.7) 0.460 (11.7) 0.460 (11.7) 0.420 (10.7) + ~ ~ 0.500 Min (12.7) 0.600 Min (15.2) 0.060 Typ (1.52) _ 0.160 (4.1) 0.140 (3.6) 0.034 (8.6) 0.028 (7.6) August 1999, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST FASTr™ GTO™ SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. E