Series 72 Convoluted Tubing 710-002 Non-Environmental Straight, 45° & 90° User-Installable Connector Fittings for Series 72 Annular Convoluted Tubing 710 A A 002 M 16 20 TYPE A Product Series Dash No. (Table II) Connector Designator (A, D, F, H, or L) (Pages F-4 to F-6) Shell Size (Table I) Finish (Table III) Angle: A = 90° B = 45° S = Straight E (REF) Basic No. A THREAD (Page F-17) E C DIA (Page F-17) TUBING I.D. (Ref) (See Table II) STYLE 2 (STRAIGHT) STRAIGHT .875 (22.2) MAX H 45° F J STYLE 2 (90° & 45°) G 90° 45° L TYP. DIA Metric dimensions (mm) are indicated in parentheses. Tubing shown for reference only. © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] E-10 Series 72 Convoluted Tubing 710-002 Non-Environmental Straight, 45° & 90° User-Installable Connector Fittings for Series 72 Annular Convoluted Tubing SHELL SIZE A,D,F,L 08 10 12 14 16 18 20 22 24 28 32 36 H 09 11 13 15 17 19 21 23 25 ---- E MAX 1.120 (28.4) 1.141 (29.0) 1.180 (30.0) 1.202 (30.5) 1.230 (31.2) 1.260 (32.0) 1.300 (33.0) 1.335 (33.9) 1.360 (34.5) 1.435 (36.4) 1.505 (38.2) 1.570 (39.9) DASH NO. 09 12 16 20 24 28 32 40 TABLE I F MAX .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) G MAX 1.605 (40.8) 1.725 (43.8) 1.745 (44.3) 1.815 (46.1) 1.905 (48.4) 2.075 (52.7) 2.075 (52.7) 2.185 (55.5) 2.185 (55.5) 2.355 (59.8) 2.575 (65.4) 2.605 (66.2) TABLE II TUBING I.D. (REF) MIN MAX .240 (6.1) .280 (7.1) .330 (8.4) .370 (9.4) .450 (11.4) .500 (12.7) .570 (14.5) .620 (15.7) .690 (17.5) .750 (19.1) .810 (20.6) .870 (22.1) .930 (23.6) 1.000 (25.4) 1.180 (30.0) 1.250 (31.8) H MAX .520 (13.2) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .927 (23.5) .927 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) J MAX 1.655 (42.0) 1.655 (42.0) 1.715 (43.6) 1.805 (45.8) 1.915 (48.6) 2.105 (53.5) 2.105 (53.5) 2.255 (57.3) 2.255 (57.3) 2.305 (58.5) 2.405 (61.1) 2.495 (63.4) L DIA .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.438 (36.5) 1.625 (41.3) 1.750 (44.5) 2.000 (50.8) TABLE III SYMBOL FINISH B Olive Drab over Cadmium Plate J Gold Iridite over Cadmium Plate over Nickel M Electroless Nickel N Olive Drab over Cadmium Plate over Nickel NC Zinc-Cobalt, Olive Drab NF Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) T When tubing I.D. MAX exceeds inside diameter of connector shell, style 2 will be supplied. Refer to pages F-15 and F-16. Bright Dip Cadmium Plate over Nickel © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] E-11