FAIRCHILD 74S140

Revised April 2000
DM74S140
Dual 4-Input NAND 50Ω Line Driver
General Description
This device contains two independent line driver gates
each of which performs the logic NAND function.
Ordering Code:
Order Number
DM74S140
Package Number
N14A
Package Description
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Connection Diagram
Function Table
Y = ABCD
Inputs
Output
A
B
C
D
Y
X
X
X
L
H
X
X
L
X
H
X
L
X
X
H
L
X
X
X
H
H
H
H
H
L
H = HIGH Logic Level
L = LOW Logic Level
X = Either LOW or HIGH Logic Level
© 2000 Fairchild Semiconductor Corporation
DS006467
www.fairchildsemi.com
DM74S140 Dual 4-Input NAND 50Ω Line Driver
August 1986
DM74S140
Absolute Maximum Ratings(Note 1)
Supply Voltage
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
7V
Input Voltage
5.5V
0°C to +70°C
Operating Free Air Temperature Range
−65°C to +150°C
Storage Temperature Range
Recommended Operating Conditions
Symbol
Parameter
Min
Nom
Max
4.75
5
5.25
Units
VCC
Supply Voltage
VIH
HIGH Level Input Voltage
VIL
LOW Level Input Voltage
0.8
V
IOH
HIGH Level Output Current
−3
mA
IOL
LOW Level Output Current
60
mA
TA
Free Air Operating Temperature
70
°C
V
2
V
0
Electrical Characteristics
over recommended operating free air temperature (unless otherwise noted)
Symbol
Parameter
Conditions
VI
Input Clamp Voltage
VCC = Min, II = −18 mA
VOH
HIGH Level
VCC = Min, VIL = Max
Min
2.7
IOH = Max
Output Voltage
VIL = 0.5V, RO = 50Ω to GND
VOL
LOW Level
VCC = Min, IOL = Max
Output Voltage
VIH = Min
Typ
(Note 2)
Max
Units
−1.2
V
3.4
V
2.0
0.5
V
mA
II
Input Current @ Max Input Voltage
VCC = Max, VI = 5.5V
1
IIH
HIGH Level Input Current
VCC = Max, VI = 2.7V
100
µA
IIL
LOW Level Input Current
VCC = Max, VI = 0.5V
−4
mA
IOS
Short Circuit Output Current
VCC = Max (Note 3)
−225
mA
ICCH
Supply Current with Outputs HIGH
VCC = Max
10
18
mA
ICCL
Supply Current with Outputs LOW
VCC = Max
25
44
mA
−50
Note 2: All typicals are at VCC = 5V, TA = 25°C.
Note 3: Not more than one output should be shorted at a time, and the duration should not exceed one second.
Switching Characteristics
at VCC = 5V and TA = 25°C
RL = 93Ω
Symbol
tPLH
CL = 50 pF
Parameter
Propagation Delay Time
LOW-to-HIGH Level Output
tPHL
Propagation Delay Time
HIGH-to-LOW Level Output
www.fairchildsemi.com
2
CL = 150 pF
Units
Min
Max
Min
Max
2
6.5
3
9
ns
2
6.5
3
9
ns
DM74S140 Dual 4-Input NAND 50Ω Line Driver
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Package Number N14A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
3
www.fairchildsemi.com