ETC2 C-13-F04-PD-SSTL 1310nm emitting,1490nm receiving (pin-tia, 3.3v), bi-directional diplexer optical module Datasheet

1310nm Emitting,1490nm Receiving (PIN-TIA, 3.3V),
Bi-directional Diplexer Optical Module
C-13/14-FXX-PX-SXXX/XXX-XX
Features
• Single fiber bi-directional operation
• Laser diode with multi-quantum-well structure
• Low threshold current
• InGaAs/InP PIN Photodiode with trans-impedance amplifier
• High sensitivity with AGC*
• Differential ended output
• Single +3.3V Power Supply
• Integrated WDM coupler
• Un-cooled operation from -40ºC to +85ºC
• Hermetically sealed active component
• Single mode fiber pigtailed with optical FC/ST/SC/MU/LC connector
• Design for fiber optic networks
• RoHS Compliant available
Absolute Maximum Rating (Tc=25ºC)
Parameter
Fiber Output Power
Symbol
Value
Unit
Pf
1(L) / 1.5(M) / 2.5(H)
mW
L/M/H
LD Reverse Voltage
VRLD
2
V
PIN-TIA Voltage
VCC
4.5
V
Operating Temperature
Topr
-40 to +85
ºC
Storage Temperature
Tstg
-40 to +85
ºC
(All optical data refer to a coupled 9/125µm SM fiber)
Optical and Electrical Characteristics( Tc=25ºC)
Parameter
Laser Diode
Optical Output Power
L
M
H
Symbol
Min
Typical
Max
Unit
Test Condition
Pf
0.2
0.5
1
0.35
0.75
1.6
0.5
1
-
mW
CW, Ith+20mA , kink free
λ
1290
1310
1330
nm
CW, Pf=Pf(Min)
Spectrum Width (RMS)
∆λ
-
-
3
nm
CW, Pf=Pf(Min)
Threshold Current
Ith
-
10
15
mA
CW
Peak Wavelength
Forward Voltage
Rise/Fall Time
VF
-
1.2
1.5
V
CW, Pf=Pf(Min)
tr/ tf
-
-
0.3
ns
Ibias=Ith ,10% to 90%
Monitor Diode
Monitor Current
Im
100
-
-
µA
CW, Pf=Pf(Min),VRPD=2V
Dark Current
IDARK
-
-
0.1
µA
VRPD=5V
Capacitance
Ct
-
6
15
pF
VRPD=5V, f=1MHz
∆Pf/Pf
-1.5
-
1.5
dB
APC, -40 to +85ºC
Module
Tracking Error
Optical Crosstalk
CRT
< -45
dB
Note:
1.Pin assignment can be customized.
2.Specifications subject to change without notice.
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
1
LUMNDS1545-FEB0906
rev. A.0
1310nm Emitting,1490nm Receiving (PIN-TIA, 3.3V),
Bi-directional Diplexer Optical Module
C-13/14-FXX-PX-SXXX/XXX-XX
Detector λ=1480-1500nm
DC Electrical Characteristics( Tc=25ºC)
Parameter
Symbol
Min
Typical
Max
Unit
Power Supply
Vcc
3.0
3.3
3.6
V
Differential Output Voltage
Vd
Supply Current (no load)
Icc
F02
-
-
1000
F04
-
260
450
F06
185
250
415
F02
-
-
35
F04
-
21
30
F06
-
26
50
Test Condition
mV
mA
AC/Optical and Electrical Characteristics( Tc=25ºC)
Parameter
Symbol
Detection Range
F02
Gain @ 10 Mbps Differential
Bandwidth
Saturation Power
Sensitivity
Output Resistance
LUMINENTOIC.COM
G
BW
Psat
Sens.
Rout
Min
Typical
Max
Unit
Test Condition
1480
-
1500
nm
-
52
-
70
V/mW
Measure differentially, AC coupled, RL=50Ω
Measure differentially, AC coupled, RL=50Ω
F04
6
7
-
F06
1.92
2.5
3.4
F02
120
140
-
F04
404
470
-
F06
700
920
1100
F02
-3
0
-
F04
-7
-6
-
F06
-3
-
-
BER<10-12 @1.25Gbps PRBS 27-1,Er=10dB
F02
-
-38
-35
BER<10-10 @155Mbps PRBS 223-1,Er=10dB
F04
-
-33
-30
F06
-
-26
-23
F02
-
50
-
F04
48
50
52
F06
48
50
62
Measure differentially with 30uAp-p signal
MHz
BER<10-10 @155Mbps PRBS 223-1,Er=10dB
dBm
dBm
BER<10-10 @622Mbps PRBS 223-1,Er=10dB
BER<10-10 @622Mbps PRBS 223-1,Er=10dB
BER<10-12 @1.25Gbps PRBS 27-1,Er=10dB
ohm
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
2
LUMNDS1545-FEB0906
rev. A.0
1310nm Emitting,1490nm Receiving (PIN-TIA, 3.3V),
Bi-directional Diplexer Optical Module
C-13/14-FXX-PX-SXXX/XXX-XX
Pin Assignment
Pin Assignment
PIN-TIA Pin Assignment
LD Pin Assignment
A Type
D Type
Pin 1 : Laser Cathode
Pin 2 : Laser Anode and Case Gnd
Pin 3 : Monitor Diode Anode
Pin 4 : Monitor Diode Cathode
Pin 1 : Laser Anode and Monitor Diode Cathode
Pin 2 : Case Gnd
Pin 3 : Laser Cathode
Pin 4 : Monitor Diode Anode
Functional Schematic
Outline Demensions
Units in mm.
Part Number: C-13/14-FXX-PX-SXXX/XXX-XX
Top view
4.9~5.7
19.4
FC:FC/PC
PIN-TIA
PC
(SR=20)
LD
1000
Left side view
+200
+0
Front view
DIMENSION: A:7.0~7.6 mm (Low & Middle power)
A:9.3~9.9 mm (High power)
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
3
LUMNDS1545-FEB0906
rev. A.0
1310nm Emitting ,1490nm Receiving (PIN-TIA, 3.3V),
Bi-directional Diplexer Optical Module
C-13/14-FXX-PX-SXXX/XXX-XX
Ordering Information
C-13/14-FXX-PX-SXXX/XXX-XX
1310nm Transmitter
1490nm Receiver
Package
P=Pigtail
02: 155 Mb/s PIN-TIA +3.3V
04: 622 Mb/s PIN-TIA +3.3V
06: 1250 Mb/s PIN-TIA +3.3V
Connector
FC/ST/SC/MU/LC/-
Pin Assignment
"-"=A Type
D =D Type
- : PC Fiber
APC : APC Fiber
Fiber Output Power
L/M/H
RoHS Compliant
-/G5/GR
Blank = RoHS non-compliant product
G5 = RoHS 5/6-compliant product (lead exemption)
GR = Full RoHS compliant product (no exemption)
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is
highly recommended. Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Notice
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at LuminentOIC's sole and absolute discretion.
LuminentOIC warrants performance of its products to current specifications only in accordance with the company's standard one-year
warranty; however, specifications designated as “preliminary" are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability,
fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company's Terms and Conditions of
Sale for further warranty information.
LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right,
copyright, or intellectual property right, and LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in
implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers
using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC
for any damages resulting from such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS" BASIS. Customer agrees that LuminentOIC is not liable for any
actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this
document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order,
that the information contained herein is current.
© LuminentOIC, Inc. 2006
All rights reserved
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
4
LUMNDS1545-FEB0906
rev. A.0
Similar pages