Cypress CY7C964A-NC Bus interface logic circuit Datasheet

PRELIMINARY
CY7C964A
Bus Interface Logic Circuit
Features
• Comparators, counters, latches, and drivers minimize
logic requirements for a variety of multiplexed and
non-multiplexed buses
• Directly drives VMEbus address and data signals
• 8-bit comparator for slave address decoding
• Flexible interface optimized for VMEbus applications
• Companion device to Cypress VMEbus family of components
• Replaces multiple SSI/MSI components
• Cascadable
• 64-pin QFP
• See the VMEbus Interface Handbook for more information
Functional Description
The CY7C964A integrates several space-consuming functions
into one small package, freeing board space for the implementation of added-value board features. It contains counters,
comparators, latches, and drivers configured to be of value to
implementors of any backplane interface with address and
data buses, particularly VMEbus interfaces. The on-chip drivers are suitable for driving the VMEbus directly. The
CY7C964A is ideal in applications where high-performance
and real estate are primary concerns.
Although having many applications, the Bus Interface Logic
Circuit is an ideal companion part to Cypress’s VMEbus family
of components, the VIC068A, VIC64, and the CY7C960A. It is
intended to drive the address and data buses, so three or four
of these small devices are needed per controller. In every
case, the controllers provide the control and timing signals to
the Bus Interface Logic Circuit as it acts as a bridge between
the VMEbus and the Local bus.
Application with VMEbus Architecture
Use with Cypress VMEbus Controllers
The CY7C964A Bus Interface Logic Circuit is a seamless interface between the VIC068A/VIC64 and the VMEbus signals.
The device functions equally well in the established 32-bit
VMEbus arena and the new 64-bit VMEbus standard. The device contains three 8-bit counters to fulfill the functions of Block
counters, and DMA counters as implied by the D64 portion of
the VMEbus specification. It also contains the necessary multiplexing logic to allow the 64-bit-wide VMEbus path to be funnelled to and from the 32-bit local bus. Control circuitry is included to manage the switching of the 32-bit address bus
during normal (32-bit) operations, and during MBLT (64-bit)
operations. The on-chip drivers are capable of driving the
VMEbus directly (48 mA).
Use in Other VMEbus Controller Implementations
The CY7C964A circuitry is designed to be of use to designers
of VMEbus circuitry, including VSB (VME subsystem bus) and
designs not requiring the features of the Cypress VIC068A,
VIC64, and CY7C960A. The logic diagram includes general-purpose blocks of comparators, counters, and latches that
can be controlled using the flexible control interface to allow
many different options to be implemented. Although the device
is offered in a small 64-pin package, the use of multiplexed
input and output pins provides access to the many internal
functions, thus saving external circuitry.
Pin Configuration
Cypress Semiconductor Corporation
Document #: 38-09001 Rev. *A
•
3901 North First Street
•
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
D1
VCC
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
D7
A6
D6
A5
D5
A4
D4
GND
A3
D3
A2
D2
A1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
VCC
GND
LD7
LDS
FC1
STROBE*
MWB*
LCOUT*
GND
VCOMP*
VCOUT*
LADO
LADI
LEDI
LEDO
A7
GND
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
VCC
LA7
LD6
LA6
LD5
LA5
LD4
LA4
GND
LD3
LA3
LD2
LA2
LD1
LA1
VCC
PQFP/CQFP/TQFP
Top View
GND
LD0
LA0
DENIN*
DENIN1*
LAEN
LCIN*
VCIN*
VCC
BLT*
D64
DENO*
ABEN*
D0
A0
GND
C964A-1
San Jose
•
CA 95134 • 408-943-2600
Revised June 12, 2001
CY7C964A
Application with Other Bus Architectures
The CY7C964A is optimized for applications requiring wide
buffers and high-performance multiplexing operations. The architecture can be configured to provide functions such as
16-bit bidirectional three-state latch and 16-bit comparator
with mask register, or more complex functions such as 16-to-8
pipelined bidirectional multiplexer with address counter/comparator circuitry. The device can be cascaded to generate
counters and comparators suitable for multiple byte address/data buses. The on-chip 48 mA drivers can be directly
connected to many standard backplane buses.
Ordering Information
Ordering Code
Package
Name
Package Type
CY7C964A–ASC
A64
64-Pin Thin Quad Flatpack
CY7C964A–NC
N65
64-Pin Plastic Quad Flatpack
CY7C964A–UM
U65
64-Pin Ceramic Quad Flatpack
CY7C964A–UMB
U65
64-Pin Ceramic Quad Flatpack
Operating
Range
Commercial
Military
Related Documents
VMEbus Interface Handbook
Document #: 38-09001 Rev. *A
Page 2 of 6
CY7C964A
Package Diagrams
64-Pin Thin Quad Flatpack A64
Document #: 38-09001 Rev. *A
Page 3 of 6
CY7C964A
Package Diagrams (continued)
64-Lead Plastic Thin Quad Flatpack N65
Document #: 38-09001 Rev. *A
Page 4 of 6
CY7C964A
Package Diagrams (continued)
64-Lead Ceramic Quad Flatpack (Cavity Up) U65
Document #: 38-09001 Rev. *A
Page 5 of 6
© Cypress Semiconductor Corporation, 1997. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress Semiconductor product. Nor does it convey or imply any license under patent or other rights. Cypress Semiconductor does not authorize
its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
Semiconductor products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress Semiconductor against all charges.
CY7C964A
Document Title: CY7C964A Bus Interface Logic Circuit
Document Number: 38-09001
REV.
ECN NO.
Issue Date
**
106236
04/20/01
SZV
Change from Spec number: 38-00197 to 38-09001
*A
107043
06/12/01
KBN
Change from CY7C964 to CY7C964A; removed GMB and
GM packages
Document #: 38-09001 Rev. *A
Orig. of Change
Description of Change
Page 6 of 6
Similar pages