CREE CXA1310-0000-000F0HK250F Xlamp Datasheet

®
CLD-DS87 Rev 0
Product family data sheet
®
Cree XLamp CXA1310 LED
Table of Contents
Product Description
features
The XLamp CXA1310 is Cree’s
• Available in 4-step and 2-step
Characteristics............................... 2
newest High Density (HD) LED
EasyWhite bins at 2700 K,
Operating Limits............................. 3
array,
3000 K, 3500 K, 4000 K,
Flux Characteristics, EasyWhite
5000 K, 5700 K and 6500 K
Order Codes and Bins - 18 V............ 4
CCT
Flux Characteristics, ANSI White
featuring a 6‑mm optical
source
and
enabling
lighting
manufacturers to create a new
®
• Available in ANSI white bins at
the same intensity and light quality
4000 K, 5000 K, 5700 K and
Flux Characteristics, EasyWhite
6500 K CCT
Order Codes and Bins - 36 V............ 6
as
20‑W
ceramic
metal
halide
(CMH) at up to 50 percent lower
• Available in 70-, 80- and
power. The new HD class of CXA
93‑minimum CRI options
arrays
provide
unrivaled
lumen
density that can reduce system
cost for the next generation of LED
spotlights.
• Forward voltage options: 18 V
& 36 V
The
CXA
LED
Design
Guide
provides basic information on the
requirements to use the CXA1310
LED
successfully
in
luminaire
designs.
1
Flux Characteristics, ANSI White
Order Codes and Bins - 36 V............ 7
Relative Spectral Power Distribution.. 8
Electrical Characteristics.................. 9
• 85 °C binning and
Relative Luminous Flux...................10
characterization
Typical Spatial Distribution..............12
• Maximum drive current:
www.cree.com/Xlamp
Order Codes and Bins - 18 V............ 5
generation of products that delivers
1050 mA (18 V), 525mA (36 V)
• 115° viewing angle, uniform
chromaticity profile
• Top-side solder connections
Performance Groups - Brightness.....12
Performance Groups - Chromaticity.. 13
Cree EasyWhite Bins Plotted on the
1931 CIE Color Space....................15
Cree ANSI White Bins Plotted on
• Thermocouple attach point
the 1931 CIE Color Space...............15
• NEMA SSL-3 2011 standard flux
Bin and Order Code Formats...........16
bins
Mechanical Dimensions..................16
Thermal Design.............................17
Notes...........................................18
Packaging.....................................19
1
Cree XLamp CXA LED Design Guide,
Design Guide DG02, www.cree.com/
xlamp_app_notes/cxa_design_guide
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree
logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.407.5300
XLamp CXA1310 LED
Characteristics
Characteristics
Viewing angle (FWHM)
ESD withstand voltage (HBM per Mil-Std-883D)
Unit
degrees
Minimum
Typical
Maximum
115
V
8000
DC forward current (18 V)
mA
1050*
DC forward current (36 V)
mA
525*
Reverse current
mA
0.1
Forward voltage (18 V, @ 700 mA, 85 °C)
V
Forward voltage (18 V, @ 700 mA, 25 °C)
V
Forward voltage (36 V, @ 350 mA, 85 °C)
V
Forward voltage (36 V, @ 350 mA, 25 °C)
V
*
17.8
21
35.6
42
Refer to the Operating Limits section.
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
2
XLamp CXA1310 LED
Operating Limits
The maximum current rating of the CXA1310 is dependent on the case temperature (Tc) when the LED has reached
thermal equilibrium under steady-state operation. Please refer to the Mechanical Dimensions section on page 16 for
the location of the Tc measurement point.
CXA1310-18V
1100
1000
900
800
If (mA)
700
600
18 V
500
400
300
200
100
0
0
25
50
75
100
125
150
Case Temperature (°C)
CXA1310-36V
600
500
If (mA)
400
300
36 V
200
100
0
0
25
50
75
100
125
150
Case Temperature (°C)
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
3
XLamp CXA1310 LED
Flux Characteristics, EasyWhite Order Codes and Bins - 18 V (If = 700 mA, TJ = 85 °C)
The following tables provide order codes for XLamp CXA1310 LEDs. For a complete description of the order code
nomenclature, please reference Bin and Order Code Formats (page 16).
Base Order Codes
Min. Luminous Flux
@ 700 mA
CRI
CCT
Range
Min
Typ
70
75
80
---
70
75
80
---
70
75
80
---
70
75
80
---
80
---
93
95
80
---
93
95
80
---
93
95
6500 K
5700 K
5000 K
4000 K
3500 K
3000 K
2700 K
Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
J2
1040
1165
J4
1120
1255
G4
840
941
H2
900
1008
J2
1040
1165
J4
1120
1255
G2
780
881
G4
840
941
H4
970
1086
J2
1040
1165
F4
730
831
G2
780
881
2-Step Order Code
Chromaticity
Region
4-Step Order Code
Chromaticity
Region
65F
65F
57F
57F
50H
50H
40H
40H
35H
35H
30H
30H
27H
27H
CXA1310-0000-000F00K250H
CXA1310-0000-000F00K450H
CXA1310-0000-000F0HJ450H
CXA1310-0000-000F0HK250H
CXA1310-0000-000F00K240H
CXA1310-0000-000F00K440H
CXA1310-0000-000F0HJ440H
CXA1310-0000-000F0HK240H
CXA1310-0000-000F00J235H
CXA1310-0000-000F00J435H
CXA1310-0000-000F0YG435H
CXA1310-0000-000F0YH235H
CXA1310-0000-000F00J230H
CXA1310-0000-000F00J430H
CXA1310-0000-000F0YG230H
CXA1310-0000-000F0YG430H
CXA1310-0000-000F00H427H
CXA1310-0000-000F00J227H
CXA1310-0000-000F0YF427H
CXA1310-0000-000F0YG227H
50F
50F
40F
40F
35F
35F
30F
30H
27F
27F
CXA1310-0000-000F00K265F
CXA1310-0000-000F00K465F
CXA1310-0000-000F0HJ465F
CXA1310-0000-000F0HK265F
CXA1310-0000-000F00K257F
CXA1310-0000-000F00K457F
CXA1310-0000-000F0HJ457F
CXA1310-0000-000F0HK257F
CXA1310-0000-000F00K250F
CXA1310-0000-000F00K450F
CXA1310-0000-000F0HJ450F
CXA1310-0000-000F0HK250F
CXA1310-0000-000F00K240F
CXA1310-0000-000F00K440F
CXA1310-0000-000F0HJ440F
CXA1310-0000-000F0HK240F
CXA1310-0000-000F00J235F
CXA1310-0000-000F00J435F
CXA1310-0000-000F0YG435F
CXA1310-0000-000F0YH235F
CXA1310-0000-000F00J230F
CXA1310-0000-000F00J430F
CXA1310-0000-000F0YG230F
CXA1310-0000-000F0YG430F
CXA1310-0000-000F00H427F
CXA1310-0000-000F00J227F
CXA1310-0000-000F0YF427F
CXA1310-0000-000F0YG227F
Notes
•
*
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements.
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
4
XLamp CXA1310 LED
Flux Characteristics, ANSI White Order Codes and Bins - 18 V (If = 700 mA,
TJ = 85 °C)
The following tables provide order codes for XLamp CXA1310 LEDs. For a complete description of the order code
nomenclature, please reference Bin and Order Code Formats (page 16).
Base Order Codes
Min. Luminous Flux
@ 700 mA
CRI
CCT
Range
Min
Typ
70
75
80
---
70
75
80
---
70
75
80
---
70
75
80
---
6500 K
5700 K
5000 K
4000 K
Chromaticity Regions
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
1A0, 1B0, 1C0, 1D0
1A0, 1B0, 1C0, 1D0
2A0, 2B0, 2C0, 2D0
2A0, 2B0, 2C0, 2D0
3A0, 3B0, 3C0, 3D0
3A0, 3B0, 3C0, 3D0
5A0, 5B0, 5C0, 5D0
5A0, 5B0, 5C0, 5D0
Order Code
CXA1310-0000-000F00K20E1
CXA1310-0000-000F00K40E1
CXA1310-0000-000F0HJ40E1
CXA1310-0000-000F0HK20E1
CXA1310-0000-000F00K20E2
CXA1310-0000-000F00K40E2
CXA1310-0000-000F0HJ40E2
CXA1310-0000-000F0HK20E2
CXA1310-0000-000F00K20E3
CXA1310-0000-000F00K40E3
CXA1310-0000-000F0HJ40E3
CXA1310-0000-000F0HK20E3
CXA1310-0000-000F00K20E5
CXA1310-0000-000F00K40E5
CXA1310-0000-000F0HJ40E5
CXA1310-0000-000F0HK20E5
Notes
•
*
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements.
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
5
XLamp CXA1310 LED
Flux Characteristics, EasyWhite Order Codes and Bins - 36 V (If = 350 mA, TJ = 85 °C)
The following tables provide order codes for XLamp CXA1310 LEDs. For a complete description of the order code
nomenclature, please reference Bin and Order Code Formats (page 16).
Base Order Codes
Min. Luminous Flux
@ 350 mA
CRI
CCT
Range
Min
Typ
70
75
80
---
70
75
80
---
70
75
80
---
70
75
80
---
80
---
93
95
80
---
93
95
80
---
93
95
6500 K
5700 K
5000 K
4000 K
3500 K
3000 K
2700 K
Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
J2
1040
1165
J4
1120
1255
G4
840
941
H2
900
1008
J2
1040
1165
J4
1120
1255
G2
780
881
G4
840
941
H4
970
1086
J2
1040
1165
F4
730
831
G2
780
881
2-Step Order Code
Chromaticity
Region
4-Step Order Code
Chromaticity
Region
65F
65F
57F
57F
50H
50H
40H
40H
35H
35H
30H
30H
27H
27H
CXA1310-0000-000N00K250H
CXA1310-0000-000N00K450H
CXA1310-0000-000N0HJ450H
CXA1310-0000-000N0HK250H
CXA1310-0000-000N00K240H
CXA1310-0000-000N00K440H
CXA1310-0000-000N0HJ440H
CXA1310-0000-000N0HK240H
CXA1310-0000-000N00J235H
CXA1310-0000-000N00J435H
CXA1310-0000-000N0YG435H
CXA1310-0000-000N0YH235H
CXA1310-0000-000N00J230H
CXA1310-0000-000N00J430H
CXA1310-0000-000N0YG230H
CXA1310-0000-000N0YG430H
CXA1310-0000-000N00H427H
CXA1310-0000-000N00J227H
CXA1310-0000-000N0YF427H
CXA1310-0000-000N0YG227H
50F
50F
40F
40F
35F
35F
30F
30H
27F
27F
CXA1310-0000-000N00K265F
CXA1310-0000-000N00K465F
CXA1310-0000-000N0HJ465F
CXA1310-0000-000N0HK265F
CXA1310-0000-000N00K257F
CXA1310-0000-000N00K457F
CXA1310-0000-000N0HJ457F
CXA1310-0000-000N0HK257F
CXA1310-0000-000N00K250F
CXA1310-0000-000N00K450F
CXA1310-0000-000N0HJ450F
CXA1310-0000-000N0HK250F
CXA1310-0000-000N00K240F
CXA1310-0000-000N00K440F
CXA1310-0000-000N0HJ440F
CXA1310-0000-000N0HK240F
CXA1310-0000-000N00J235F
CXA1310-0000-000N00J435F
CXA1310-0000-000N0YG435F
CXA1310-0000-000N0YH235F
CXA1310-0000-000N00J230F
CXA1310-0000-000N00J430F
CXA1310-0000-000N0YG230F
CXA1310-0000-000N0YG430F
CXA1310-0000-000N00H427F
CXA1310-0000-000N00J227F
CXA1310-0000-000N0YF427F
CXA1310-0000-000N0YG227F
Notes
•
*
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements.
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
6
XLamp CXA1310 LED
Flux Characteristics, ANSI White Order Codes and Bins - 36 V (If = 350 mA,
TJ = 85 °C)
The following tables provide order codes for XLamp CXA1310 LEDs. For a complete description of the order code
nomenclature, please reference Bin and Order Code Formats (page 16).
Base Order Codes
Min. Luminous Flux
@ 350 mA
CRI
CCT
Range
Min
Typ
70
75
80
---
70
75
80
---
70
75
80
---
70
75
80
---
6500 K
5700 K
5000 K
4000 K
Chromaticity Regions
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
K2
1200
1344
K4
1290
1445
J4
1120
1255
K2
1200
1344
1A0, 1B0, 1C0, 1D0
1A0, 1B0, 1C0, 1D0
2A0, 2B0, 2C0, 2D0
2A0, 2B0, 2C0, 2D0
3A0, 3B0, 3C0, 3D0
3A0, 3B0, 3C0, 3D0
5A0, 5B0, 5C0, 5D0
5A0, 5B0, 5C0, 5D0
Order Code
CXA1310-0000-000N00K20E1
CXA1310-0000-000N00K40E1
CXA1310-0000-000N0HJ40E1
CXA1310-0000-000N0HK20E1
CXA1310-0000-000N00K20E2
CXA1310-0000-000N00K40E2
CXA1310-0000-000N0HJ40E2
CXA1310-0000-000N0HK20E2
CXA1310-0000-000N00K20E3
CXA1310-0000-000N00K40E3
CXA1310-0000-000N0HJ40E3
CXA1310-0000-000N0HK20E3
CXA1310-0000-000N00K20E5
CXA1310-0000-000N00K40E5
CXA1310-0000-000N0HJ40E5
CXA1310-0000-000N0HK20E5
Notes
•
*
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements.
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
7
XLamp CXA1310 LED
Relative Spectral Power Distribution - White, Hot Binned, Baby
Relative Spectral Power Distribution (18 V, If = 700 ma; 36 V, If = 350 ma, Tj = 85 °C)
The following graph is the result of a series of pulsed measurements at 350 mA for the 18-V CXA1310 LED and 700 mA
for the 36-V CXA1310 LED and TJ = 85 °C.
Relative Spectral Power
100%
90%
80%
70%
60%
5000K, 70 CRI
50%
4000K, 70 CRI
40%
3000K, 80 CRI
30%
3000K, 93 CRI
20%
10%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
8
XLamp CXA1310 LED
Electrical Characteristics
The following graph is the result of a series of steady-state measurements.
20
18 V
Voltage (V)
19
Tc = 25 °C
Tc = 55 °C
18
Tc = 85 °C
Tc = 105 °C
17
16
200
300
400
500
600
700
800
900
1000
1100
Current (mA)
40
39
36 V
Voltage (V)
38
Tc = 25 °C
37
Tc = 55 °C
36
Tc = 85 °C
35
Tc = 105 °C
34
33
32
100
150
200
250
300
350
400
450
500
550
Current (mA)
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
9
XLamp CXA1310 LED
Relative Luminous Flux
The relative luminous flux values provided below are the ratio of:
• Measurements of CXA1310 at steady-state operation at the given conditions, divided by
• Flux measured during binning, which is a pulsed measurement at 700 mA at TJ = 85 °C for the 18‑V CXA1310 LED.
For example, at steady-state operation of Tc = 55 °C, IF = 500 mA, the relative luminous flux ratio is 80% in the chart
below. A CXA1310 LED that measures 1200 lm during binning will deliver 960 lm (1200 * 0.8) at steady-state operation
of Tc = 55 °C, IF = 500 mA.
Relative Luminous Flux
160%
120%
18 V
Tc = 25 °C
Tc = 55 °C
80%
Tc = 85 °C
Tc = 105 °C
40%
0%
400
500
600
700
800
900
1000
1100
Current (mA)
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
10
XLamp CXA1310 LED
Relative Luminous Flux - Continued
The relative luminous flux values provided below are the ratio of:
• Measurements of CXA1310 at steady-state operation at the given conditions, divided by
• Flux measured during binning, which is a pulsed measurement at 350 mA at TJ = 85 °C for the 36‑V CXA1310 LED.
For example, at steady-state operation of Tc = 55 °C, IF = 250 mA, the relative luminous flux ratio is 80% in the chart
below. A CXA1310 LED that measures 1200 lm during binning will deliver 960 lm (1200 * 0.8) at steady-state operation
of Tc = 55 °C, IF = 250 mA.
Relative Luminous Flux
160%
120%
36 V
Tc = 25 °C
Tc = 55 °C
80%
Tc = 85 °C
Tc = 105 °C
40%
0%
200
250
300
350
400
450
500
550
Current (mA)
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
11
XLamp CXA1310 LED
Typical Spatial Distribution
Relative Luminous Intensity
100%
80%
60%
40%
20%
-90
-70
-50
-30
0%
-10
10
30
50
70
90
Angle (º)
Performance Groups - Brightness (18 V, If = 700 ma; 36 V, If = 350 ma, Tj = 85 °C)
XLamp CXA1310 LEDs are tested for luminous flux and placed into one of the following bins.
Group Code
Min. Luminous Flux
F4
730
Max. Luminous Flux
780
G2
780
840
G4
840
900
H2
900
970
H4
970
1040
J2
1040
1120
J4
1120
1200
K2
1200
1290
K4
1290
1380
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
12
XLamp CXA1310 LED
Performance Groups - Chromaticity (Tj = 85 °C)
XLamp CXA1310 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding
coordinates.
EasyWhite Color Temperatures – 4-Step
Code
65F
57F
50F
40F
35F
30F
27F
CCT
6500 K
5700 K
5000 K
4000 K
3500 K
3000 K
2700 K
x
y
0.3253
0.3325
0.3249
0.3439
0.3331
0.3514
0.3330
0.3393
0.3097
0.3196
0.3079
0.3297
0.3164
0.3382
EasyWhite Color Temperatures – 2-Step
0.3176
0.3275
Code
0.3407
0.3459
0.3415
0.3586
0.3499
0.3654
0.3484
0.3521
0.3744
0.3782
x
y
0.3429
0.3507
0.3434
0.3571
0.3475
0.3604
0.3469
0.3539
0.3685
0.3784
0.3741
0.3837
0.3804
0.3818
0.3867
0.3857
50H
40H
CCT
5000K
4000K
0.3912
0.3917
0.3863
0.3758
0.3844
0.3778
0.3981
0.3800
0.4030
0.3857
0.4040
0.3966
0.4061
0.3941
0.4186
0.4037
0.4132
0.3976
0.4116
0.3865
0.4099
0.3890
0.4242
0.3919
0.4291
0.3973
0.4322
0.4096
0.4333
0.4062
0.4395
0.4084
35H
30H
3500K
3000K
0.4449
0.4141
0.4359
0.3960
0.4351
0.3994
0.4475
0.3994
0.4528
0.4046
0.4573
0.4178
0.4578
0.4138
0.4695
0.4207
0.4638
0.4152
0.4589
0.4021
0.4586
0.4060
27H
2700K
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
13
XLamp CXA1310 LED
Performance Groups - Chromaticity (Tj = 85 °C) - cONTINUED
ANSI White Bins
Code
CCT
Bin
Code
1A0
1B0
0E1
6500 K
1C0
1D0
ANSI White Bins
x
y
0.3048
0.3207
0.3130
0.3290
0.3144
0.3186
Code
CCT
Bin
Code
3A0
3B0
0E3
5000K
3C0
3D0
Bin
Code
2A0
x
y
0.3215
0.3350
0.3290
0.3417
0.3290
0.3300
0.3068
0.3113
0.3222
0.3243
0.3028
0.3304
0.3207
0.3462
0.3115
0.3391
0.3290
0.3538
0.3130
0.3290
0.3290
0.3417
0.3048
0.3207
0.3115
0.3391
0.3205
0.3481
0.3213
0.3373
0.3130
0.3130
2B0
0.3215
0.3350
0.3290
0.3538
0.3376
0.3616
0.3371
0.3490
0.3290
0.3290
0.3417
0.3290
0.3290
0.3417
0.3213
0.3373
0.3371
0.3490
0.3221
0.3261
0.3366
0.3369
0.3144
0.3186
0.3290
0.3300
0E2
5700 K
2C0
2D0
ANSI White Bins
Code
CCT
ANSI White Bins
x
y
.3371
.3490
.3451
.3554
.3440
.3427
.3366
Code
CCT
Bin
Code
x
y
.3670
.3578
.3702
.3722
.3825
.3798
.3369
.3783
.3646
.3376
.3616
.3702
.3722
.3463
.3687
.3736
.3874
.3451
.3554
.3869
.3958
.3371
.3490
.3825
.3798
.3463
.3687
.3825
.3798
.3551
.3760
.3869
.3958
.3533
.3620
.4006
.4044
.3451
.3554
.3950
.3875
5A0
5B0
0E5
4000K
5C0
.3451
.3554
.3783
.3646
.3533
.3620
.3825
.3798
.3515
.3487
.3950
.3875
.3440
.3427
.3898
.3716
5D0
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
14
XLamp CXA1310 LED
Cree EasyWhite Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C)
0.44
2700K
ANSI C76.377 Quadrangle
EasyWhite 4-step
EasyWhite 2-step
0.43
3000K
0.42
3500K
0.41
4000K
0.40
4500K
0.39
5000K
0.38
CCy
0.37
5700K
0.36
6500K
0.35
0.34
0.33
0.32
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.31
CCx
Cree ANSI White Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C)
0.42
ANSI C76.377 Quadrangle
0.41
4000K
0.40
4500K
5C
0.39
CCy
5B
5000K
0.38
5D
0.37
5700K
0.36
5A
3C
3B
6500K
0.35
3A
2B
0.34
2D
1C
0.33
1B
0.32
3D
2C
1D
2A
1A
0.31
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.30
CCx
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
15
XLamp CXA1310 LED
Bin and Order Code Formats
Bin codes and order codes are configured as follows:
Order CodeBin Code
Series = CXA13
Series = CXA13
Internal code
Chromaticity bin
CRI Specification
0 = Standard CRI
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
H = AND
80 min CRI
CONTAINED WITHIN ARE THE PROPRIETARY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
93 min
CRI
MAY NOT BE COPIED, REPRODUCEDY
OR=
DISCLOSED
TO ANY
6
UNAUTHORIZED PERSON WITHOUT
OF CREE INC.
SSSSSCC-HHHH-HHHGGNNNNNN
5
4
3
Internal code
THE WRITTEN CONSENT
SSSSSCC-WWW-FF-GGR-AAAAA
CRI Specification
B = 70 min CRI
H = 80 min CRI
Y = 93 min CRI
Kit code
D
Vf class: F0 = 18-V class
N0 = 36-V class
Vf class: F0 = 18-V class
N0 = 36-V class
Flux bin
Performance class
Performance class
Mechanical Dimensions
Dimensions are in mm.
13.35
±0.2
Tolerances unless otherwise specified:
.x + .10
C
2.60
.xx + .03
1.22
.xxx + .010
2.86
Tc
x° + 1°
1.00 ± .15
1.22
2.60
4.19
R.500
13.35
±0.2
6.0
±0.2
B
2.60
7.50
±0.2
1.22
2.60
1.22
0.55 ± 0.1
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
A
16
THIRD ANGLE PROJECTION
UN
MIL
TO
XLamp CXA1310 LED
Thermal Design
The CXA family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred
different junction temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and
replaced the commonplace maximum TJ calculations with maximum ratings based on forward current (IF) and case
temperature (Tc). No additional calculations are required to ensure the CXA LED is being operated within its designed
limits. Please refer to page 2 for the Operating Limit specification.
Cree has measured the temperature at the bottom of the package, commonly referred to as the solder point (TSP),
and found this value to be equivalent to the temperature at the Tc location at the top of the package once the LED has
reached thermal equilibrium. There is no need to calculate for TJ inside the package, as the thermal management design
process, specifically from TSP to ambient (Ta), remains identical to any other LED component. For more information
on thermal management of Cree XLamp LEDs, please refer to the XLamp Thermal Management application note at
www.cree.com/xlamp_app_notes/thermal_management. For CXA soldering recommendations and more information on
thermal interface materials (TIM) and connection methods, please refer to the Cree XLamp CXA Family LEDs soldering
and handling document at www.cree.com/xlamp_app_notes/CXA_SH.
To keep the CXA1310 LED at or below the maximum rated Tc, the case to ambient
temperature thermal resistance (R_c-a) must be at or below the maximum R_c-a
R_j-c
R_j-c
Tc
Tc
value shown on the following graphs, depending on the operating environment. The
y‑axis in the graph is a base 10 logarithmic scale.
As the figure at right shows, the R_c-a value is the sum of the thermal resistance of
R_tim
R_c-a
the TIM (R_tim) plus the thermal resistance of the heat sink (R_hs).
R_hs
CXA1310-18V
Ta
Ta
100.00
18 V
Maximum R_c-a
10.00
Ta = 25 °C
Ta = 55 °C
1.00
Ta = 85 °C
Ta = 105 °C
0.10
0.01
400
500
600
700
800
900
1000
1100
Current (mA)
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
17
XLamp CXA1310 LED
CXA1310-36V
Thermal
Design - Continued
100.00
36 V
Maximum R_c-a
10.00
Ta = 25 °C
Ta = 55 °C
1.00
Ta = 85 °C
Ta = 105 °C
0.10
0.01
200
250
300
350
400
450
500
550
Current (mA)
Notes
Lumen Maintenance Projections
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED
lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80
results document at www.cree.com/xlamp_app_notes/LM80_results.
Please read the XLamp Long-Term Lumen Maintenance application note at www.cree.com/xlamp_app_notes/lumen_
maintenance for more details on Cree’s lumen maintenance testing and forecasting. Please read the XLamp Thermal
Management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how thermal
design, ambient temperature, and drive current affect the LED junction temperature.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
18
XLamp CXA1310 LED
Packaging
Cree CXA1310 LEDs are packaged in trays of 20. Five trays are sealed in an anti-static bag and placed inside a carton,
5
for a total of 100 LEDs
per carton. Each carton4 contains 100 LEDs from the3 same performance bin.
CE
S PLOT AND THE INFORMATION
HE PROPRIETARY AND
ON OF CREE, INC. THIS PLOT
RODUCED OR DISCLOSED TO ANY
WITHOUTTHE WRITTEN CONSENT
2
REVISONS
DESCRIPTION
Dimensions are
in inches.
REV
Tolerances:
.x + .1
5.875
5
4
3
2
.xx + .03
1
REVISONS
R.375
ORMATION
AND
THIS PLOT
LOSED TO ANY
TEN CONSENT
.xxx
+ .010
DESCRIPTION
REV
BY
DATE
APP'D
x° + 1°
5.875
R.375
.875
5.875
.875
75
LABEL WITH CREE BIN CODE,
QTY, LOT #
TENT LABEL
UNDERSIDE
ABEL WITH CREE BIN CODE,
OF COVER
QTY, LOT #
.875
.875
LABEL WITH CREE BIN CODE,
QTY, LOT #
LABEL WITH CREE BIN CODE,
QTY, LOT #
BAG
BAG
E BIN CODE,
QTY, LOT #
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
DATE
DRAWN BY
D. CRONIN
05/08/12
CHECK
DATE
APPROVED
DATE
TITLE
LE1401 MARKET
FOR SHEET METAL PARTS ONLY MATERIAL
.X
±
1.5
DRAWING NO.
SIZE
.XX ±
.75
.XXX ±
.25
FINAL PROTECTIVE FINISH
DRAWN BY
X°
±
.5 ° DATE
UNLESS OTHERWISE SPECIFIED
4600 Silicon Drive
SCALE
CRONIN
05/08/12
DIMENSIONS ARE IN SURFACE D.
FINISH: 1.6
8.000
Durham, N.C 27703
CHECK
DATE
MILLIMETERS AND AFTER FINISH.
Phone (919) 313-5300
4
3
2
TOLERANCE UNLESS SPECIFIED:
Fax (919) 313-5558
.XX ±
.25
APPROVED
DATE
TITLE
.XXX ±
.125
®
®
®
X°
±
.5
°
this document
is subject to change without notice. Cree , the Cree logo, XLamp and EasyWhite are registered
THIRD ANGLE PROJECTION
FOR SHEET METAL PARTS ONLY MATERIAL
.X
±
1.5
REV.
DRAWING NO.
SIZE
.XX ±
.75
.XXX ±
.25
FINAL PROTECTIVE FINISH
X°
±
.5 °
C
5
Copyright © 2014 Cree, Inc. All rights reserved. The information in
trademarks of Cree, Inc.
CXA1
LE1401 MARKETING SPEC
C
SURFACE FINISH: 1.6
SCALE
8.000
CXA1310
19
SHEET
A
OF
2 /2
Similar pages