ETC2 CYT6166CHNYYWW 150ma cmos ldo regulator (preliminary) Datasheet

150mA CMOS LDO
Regulator
(Preliminary)
Description
CYT6166
Features
The CYT6166 series of fixed output low dropout
linear regulators are designed for portable battery
powered applications, which require low dropout
voltage and low ground current.
Each device
contains a voltage reference unit, an error amplifier,
a PMOS power transistor, and resistors for setting
output voltage, and current limit and temperature
limit protection circuits.
¾
Typical Low Dropout Voltage of 203mV at
75mA.
¾
Guaranteed 150mA output over the full
operating temperature range.
¾
Excellent Line and Load Regulation.
¾
High Accuracy Output Voltage of 2%.
¾
Typical Low Ground Current at 1mA
¾
Current Limiting and Thermal Protection.
¾
Standard SOT-23-3L, TO-92, and SOT-323-3L
The CYT6166 has been designed to be used
Package.
with low cost capacitors and requires a minimum
Applications
output capacitor of 1.0µF. Standard voltage versions
¾
Cellphones.
are 1.5, 1.8, 2.5, 2.8, 3.0, and 3.3V.
¾
Wireless LAN’s.
¾
Hand-Held Instrumentation.
¾
Portable Video Game Devices.
¾
Digital Cameras.
Ordering/Marking Information
Package
Ordering Information
3.3V
CYT6166AHN
2.8V
CYT6166BHN
2.5V
CYT6166CHN
1.8V
CYT6166DHN
1.5V
CYT6166EHN
3.0V
CYT6166FHN
3.3V
CYT6166AHG
2.8V
CYT6166BHG
2.5V
CYT6166CHG
1.8V
CYT6166DHG
1.5V
CYT6166EHG
3.0V
CYT6166FHG
Marking Information
CYT6166AHN
YYWW
CYT6166BHN
YYWW
CYT6166CHN
YYWW
CYT6166DHN
YYWW
CYT6166EHN
YYWW
CYT6166FHN
YYWW
CYT6166AHG
YYWW
CYT6166BHG
YYWW
CYT6166CHG
YYWW
CYT6166DHG
YYWW
CYT6166EHG
YYWW
CYT6166FHG
YYWW
YY: year code
WW: week code.
Preliminary and all contents are subject to change without prior notice.
1
150mA CMOS LDO
Regulator
(Preliminary)
CYT6166
Ordering/Marking Information (Continued)
Package
Ordering Information
Marking Information
3.3V
CYT6166ALN
166AN_
2.8V
CYT6166BLN
166BN_
2.5V
CYT6166CLN
166CN_
1.8V
CYT6166DLN
166DN_
1.5V
CYT6166ELN
166EN_
3.0V
CYT6166FLN
166FN_
3.3V
CYT6166ALG
166AG_
2.8V
CYT6166BLG
166BG_
2.5V
CYT6166CLG
166CG_
1.8V
CYT6166DLG
166DG_
1.5V
CYT6166ELG
166EG_
3.0V
CYT6166FLG
166FG_
2003, and underlined for 2004. The
3.3V
CYT6166APN
166AN_
naming pattern continues with
2.8V
CYT6166BPN
166BN_
consecutive characters for later
2.5V
CYT6166CPN
166CN_
years.
1.8V
CYT6166DPN
166DN_
1.5V
CYT6166EPN
166EN_
3.0V
CYT6166FPN
166FN_
3.3V
CYT6166APG
166AG_
2.8V
CYT6166BPG
166BG_
2.5V
CYT6166CPG
166CG_
1.8V
CYT6166DPG
166DG_
1.5V
CYT6166EPG
166EG_
3.0V
CYT6166FPG
166FG_
Starting with 1, a bar on top of 1 is
for production year 2001, and
underlined 1 is for year 2002.
The
next character is marked on top for
The last character is the week
code. (A-Z:
1-26, a-z: 27-52)
Preliminary and all contents are subject to change without prior notice.
2
150mA CMOS LDO
Regulator
(Preliminary)
Absolute Maximum Ratings(1)
CYT6166
Operating Ratings(2)
Supply Input Voltage (VIN) ..……...….… 0.7V to +6V
Supply Input Voltage (VIN) ……...... +2.0V to +5.5V
(3)
Junction Temperature (TJ) …….….. 0°C to +125°C
Power Dissipation (PD) ……….. Internally Limited
Junction Temperature (TJ) ……..... …0°C to +125°C
Package Thermal Resistance
Lead Temperature (soldering, 5 sec.) …....…. 260°C
160°C/W (TO-92)
Storage Temperature (TS) ……….. -40°C to +150°C
230°C/W (SOT-23-3L)
250°C/W (SOT-323-3L)
Electrical Characteristics
VIN = 5V; CIN = 2.2µF; COUT = 2.2µF; IOUT = 10mA; TJ = 25°C; unless otherwise noted
Symbol
Parameter
Conditions
CYT6166 – 1.5V
CYT6166 – 1.8V
CYT6166 – 2.5V
CYT6166 – 2.8V
CYT6166 – 3.0V
CYT6166 – 3.3V
Min
Typ
Max
Unit
1.470
1.764
2.450
2.744
2.940
3.234
1.5
1.8
2.5
2.8
3.0
3.3
1.530
1.836
2.550
2.856
3.060
3.366
V
V
V
V
V
VOUT
Output Voltage
Accuracy
∆VOUT
Line Regulation
VIN = VOUT + 1V to 5.5V, IOUT = 10mA
--
1
--
%
∆VOUT
Load Regulation (5)
VIN = 5V; IOUT = 10mA to 150mA
--
1
--
%
Note 4
--
0.79
--
mV/°C
IOUT = 10mA
--
20
--
IOUT = 75mA
--
203
--
IOUT = 150mA
--
500
--
Thermal
Thermal Protection Temperature
--
150
--
Protection
Protection Hysterisys
--
20
--
PSRR
Ripple Rejection
f = 120 Hz
--
51
--
dB
IQ
Quiescent Current
IOUT = 10mA
--
1
2
mA
ILIMIT
Current Limit
300
--
--
mA
Output Voltage
∆VOUT/∆T
Temperature
Coefficient
VIN – VOUT
TPROTECTION
Dropout Voltage
(6)
Preliminary and all contents are subject to change without prior notice.
3
mV
°C
150mA CMOS LDO
Regulator
(Preliminary)
CYT6166
Note 1: Exceeding the absolute maximum rating may damage the device.
Note 2: The device is not guaranteed to function outside its operating rating.
Note 3: The maximum allowable power dissipation at any TA (ambient temperature) is calculated using: PD(MAX) =
(TJ(MAX) – TA)/ΘJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature,
and the regulator will go into thermal shutdown. See “Thermal Consideration” section for details
Note 4: Output voltage temperature coefficient is the worst case voltage change divided by the total temperature range.
Note 5: Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested
for load regulation in the load range from 0.1mA to 150mA.
Changes in output voltage due to heating effects are
covered by the thermal regulation specification.
Note 6: Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its
nominal value measured at 1V differential.
Typical Application
Preliminary and all contents are subject to change without prior notice.
4
150mA CMOS LDO
Regulator
(Preliminary)
Application Hints
CYT6166
Thermal Considerations
Like any low dropout regulator, CYT6166 requires It is important that the thermal limit of the package is
external capacitors to ensure stability.
The
not exceeded.
The CYT6166 has built-in thermal
external capacitors must be carefully selected to
protection.
ensure performance.
the IC will enter protection, and VOUT will be pulled
Input Capacitor
An input capacitor of at least 2.2µF is required.
Ceramic or Tantalum can be used. The value can
be increase without upper limit.
to ground.
When the thermal limit is exceeded,
The power dissipation for a given
application can be calculated as following:
The power dissipation (PD) is
PD = IOUT * [VIN – VOUT]
Output Capacitor
An output capacitor is required for stability. It must
The thermal limit of the package is then limited to
be placed no more than 1 cm away from the VOUT
PD(MAX) = [TJ – TA]/ΘJA where TJ is the junction
pin, and connected directly between VOUT and GND
temperature, TA is the ambient temperature, and
pins.
ΘJA is around 250°C/W for CYT6166. CYT6166 is
The minimum value is 2.2µF but may be
increase without limit.
designed to enter thermal protection at 150°C. For
example, if TA is 25°C then the maximum PD is
limited to about 0.5W. In other words, if IOUT(MAX) =
150mA, then [VIN – VOUT] cannot exceed 3.33V.
Preliminary and all contents are subject to change without prior notice.
5
150mA CMOS LDO
Regulator
(Preliminary)
CYT6166
OUTLINE DRAWING SOT-23-3L (SC-59)
C
J
N
H
B
DIM
A
B
C
D
E
F
G
H
J
K
L
D
A
E
F
G
K
L
DIMENSIONS
INCHES
MM
MIN MAX MIN MAX
0.110
0.047
0.083
0.035
0.070
0.018
0.015
0.0005
0.034
0.003
-
0.120
0.055
0.104
0.040
0.080
0.024
0.020
0.004
0.040
0.007
0.027
2.80
1.20
2.10
0.89
1.78
0.45
0.37
0.013
0.887
0.085
-
3.04
1.40
2.64
1.03
2.05
0.60
0.51
0.10
1.02
0.18
0.69
OUTLINE DRAWING TO-92
A
N
DIM
B
D
E
G
F
H
K
J
A
B
E
F
G
H
J
K
DIMENSIONS
INCHES
MM
MIN MAX MIN MAX
0.175
0.170
0.500
0.016
0.045
0.095
0.080
0.125
0.205
0.210
0.610
0.021
0.055
0.105
0.105
0.165
4.445
4.318
12.70
0.407
1.143
2.413
2.032
3.175
Preliminary and all contents are subject to change without prior notice.
6
5.207
5.334
15.50
0.533
1.397
2.667
2.667
4.191
150mA CMOS LDO
Regulator
(Preliminary)
OUTLINE DRAWING SOT-323-3L
Preliminary and all contents are subject to change without prior notice.
7
CYT6166
Similar pages