Advantech C-300-S-114 General devices chassistrak slide Datasheet

General Devices ChassisTrak Slides
C-300-S Slide
Catalog
Number
C-300-S-110
C-300-S-112
C-300-S-114
C-300-S-116
C-300-S-118
C-300-S-120
C-300-S-122
C-300-S-124
C-300-S-126
C-300-S-128
C-300-S-130
A
B
C
10.00
12.00
14.00
16.00
18.00
20.00
22.00
24.00
26.00
28.00
30.00
9.25
9.25
13.25
13.25
13.25
19.25
19.25
19.25
25.25
25.25
25.25
8.63
8.63
12.63
12.63
12.63
18.63
18.63
18.63
24.63
24.63
24.63
D
D
E
E
F
(min) (max) (min) (max)
11.00
11.00
15.00
15.00
15.00
21.00
21.00
21.00
27.00
27.00
27.00
11.00
13.00
15.00
17.00
19.00
21.00
23.00
25.00
27.00
29.00
31.00
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
2.13
0.13
2.13
4.13
0.13
2.13
4.13
0.13
2.13
4.13
G
H
3 2.31 0.78
3 2.31 0.78
4 4.31 1.16
4 4.31 1.16
4 4.31 1.16
5 7.31 3.53
5 7.31 3.53
5 7.31 3.53
7 10.31 2.28
7 10.31 2.28
7 10.31 2.28
Load
Capacity
95 LBS.
95 LBS.
90 LBS.
90 LBS.
90 LBS.
85 LBS.
85 LBS.
85 LBS.
80 LBS.
80 LBS.
80 LBS.
Order
TO Numbering
ORDER,
C-300-S
SPECIFY
-
-
Stationary Section Length
1 - Cabinet Mount
2 - Strap Mount
4 - Closed Slot
AR - Automatic
Release if desired
AND/OR
RC - See chart below
For information on Strap Mount option see page 27.
Notes
1. Finish: All standard slides are coated with PoxylubeTM
dry film lubricant.
2. All standard slides are designed to lock-out in the
extended position and are available with an optional
automatic release if lock-out is not desirable.
3. Standard hardware packages include all the hardware
necessary to mount your Chassis Trak® slides:
• Rear mounting bracket (B-217 or B-161) included
• Bar Nuts (CA8056-06-0017 or CA8056-06-0014)
• #10-32 screws and keps nuts
4. All sliding members of the standard slide are made from
cold rolled steel.
5. All Chassis Trak® solid bearing slides are supplied with a
quick disconnect feature.
6. Optional mounting patterns, slide lengths and extensions
are available.
7. For optional mounting brackets see page 34.
http://buy.advantech.com
www.generaldevices.com
Phone: 1-888-576-9668
Phone: 317-897-7000
Email: [email protected]
Email: [email protected]
17
1
ISO 9001:2000 Registered
Strap Mounting Option
C-230 Strap Mount
Notes
1.
2.
3.
To order, specify C-230 - S - 2 XX see pages 14-15 for more information.
Strap mount slides are not designed to accommodate the standard EIA hole pattern.
All slides requires a .31” clearance behind the spring and button assembly for proper operation.
A
B
12.00
14.00
16.00
18.00
20.00
22.00
24.00
10.50
12.50
14.50
16.50
18.50
20.50
22.50
A
B
10.00
12.00
14.00
16.00
18.00
20.00
22.00
24.00
26.00
28.00
30.00
8.50
10.50
12.50
14.50
16.50
18.50
20.50
22.50
24.50
26.50
28.50
A
B
12.00
14.00
16.00
18.00
20.00
22.00
24.00
10.50
12.50
14.50
16.50
18.50
20.50
22.50
C-300 Strap Mount
Notes
1.
2.
3.
To order, specify C-300 - S - 2 XX see pages 16-17 for more information.
Strap mount slides are not designed to accommodate the standard EIA hole pattern.
All slides requires a .31” clearance behind the spring and button assembly for proper operation.
CTS Strap Mount
Notes
1.
2.
3.
To order, specify CTS - 2 XX see pages 18-19 for more information.
Strap mount slides are not designed to accommodate the standard EIA hole pattern.
All slides requires a .31” clearance behind the spring and button assembly for proper operation.
http://buy.advantech.com
www.generaldevices.com
Phone: 1-888-576-9668
Phone: 317-897-7000
Email: [email protected]
Email: [email protected]
27
2
ISO 9001:2000 Registered
Optional Mounting Brackets
Matrix For Solid Bearing Slides & Appropriate Rear Mounting Brackets with Range of Extension
C-300-D
C-300-S
C-874
C-3700
C-300-D-RC
C-300-S-RC
C-300-S-RC-3S
C-874-RC
C-3700-RC
B-217*
0 to .50
0 to .50
0 to .50
0 to .50
B-217-1.5
.25 to .75
.25 to .75
.25 to .75
.25 to .75
B-217-2
.75 to 1.25
.75 to 1.25
.75 to 1.25
.75 to 1.25
B-217-2.5
1.25 to 1.75
1.25 to 1.75
1.25 to 1.75
1.25 to 1.75
B-217-3
1.75 to 2.25
1.75 to 2.25
1.75 to 2.25
1.75 to 2.25
B-217-3.5
2.25 to 2.75
2.25 to 2.75
2.25 to 2.75
2.25 to 2.75
B-217-4
2.75 to 3.25
2.75 to 3.25
2.75 to 3.25
2.75 to 3.25
B-308
0 to 6.00
0 to 6.00
B-793
0 to 6.00
0 to 6.00
B-161*
0 to .50
0 to .50
B-161-1.5
.25 to .75
.25 to .75
B-161-2
.75 to 1.25
.75 to 1.25
B-161-2.5
1.25 to 1.75
1.25 to 1.75
B-161-3
1.75 to 2.25
1.75 to 2.25
B-161-3.5
2.25 to 2.75
2.25 to 2.75
B-161-4
2.75 to 3.25
2.75 to 3.25
B-309
0 to 6.00
0 to 6.00
B-389
0 to .50
0 to .50
.25 to .75
.25 to .75
.75 to 1.25
.75 to 1.25
1.25 to 1.75
1.25 to 1.75
1.75 to 2.25
1.75 to 2.25
2.25 to 2.75
2.25 to 2.75
2.75 to 3.25
2.75 to 3.25
0 to 6.00
0 to 6.00
0 to 6.00
Note brackets are made from 16 gauge C.R.S. — Standard finish: clear zinc commercial plating
*Supplied with standard slides
CATALOG
NUMBER
B-217 or B-161
1.25
B-217-1.5 or B-161-1.5
1.50
A
B-217-2 or B-161-2
2.00
B-217-2.5 or B-161-2.5
2.50
B-217-3 or B-161-3
3.00
B-217-3.5 or B-161-3.5
3.50
B-217-4 or B-161-4
4.00
B-217
B-308
B-389
34
http://buy.advantech.com
www.generaldevices.com
B-161
B-793
B-309
Phone:
1-888-576-9668 Email: [email protected]
Email: [email protected] ISO 9001:2000 Registered
3
Phone:
317-897-7000
Similar pages