Vishay CNY17 Optocoupler, phototransistor output, with base connection Datasheet

CNY17
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output, with Base Connection
FEATURES
6
• Isolation test voltage: 5000 VRMS
A
1
C
2
5
C
• Industry standard dual-in-line package
NC
3
4
E
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
B
• Long term stability
AGENCY APPROVALS
Safety application model number covering all products in
this datasheet is CNY17. This model number should be used
when consulting safety agency documents.
• UL file no. E52744
i179004-14
DESCRIPTION
• cUL tested to CSA 22.2 bulletin 5A
The CNY17 is an optically coupled pair consisting of a
gallium arsenide infrared emitting diode optically coupled to
a silicon NPN phototransitor.
• BSI IEC 60950, IEC 60065
• DIN EN 60747-5-5 (VDE 0884-5)
• FIMKO EN60950
Signal information, including a DC level, can be transmitted
by the device while maintaining a high degree of electrical
isolation between input and output.
• CQC GB8898-2011
The CNY17 can be used to replace relays and transformers
in many digital interface applications, as well as analog
applications such as CRT modulation.
ORDERING INFORMATION
C
N
Y
1
7
-
#
PART NUMBER
CTR
BIN
X
0
#
#
PACKAGE OPTION
AGENCY CERTIFIED/PACKAGE
DIP-6
Option 6
7.62 mm
10.16 mm
Option 7
Option 9
> 8 mm
8 mm typ.
T
TAPE
AND
REEL
CTR (%)
UL, cUL, BSI, FIMKO
40 to 80
63 to 125
100 to 200
DIP-6
CNY17-1
CNY17-2
CNY17-3
CNY17-4
CNY17-1X006
CNY17-2X006
CNY17-3X006
CNY17-4X006
SMD-6, option 7
CNY17-1X007T (1)
CNY17-2X007T (1)
CNY17-3X007T (1)
CNY17-4X007T (1)
SMD-6, option 9
CNY17-1X009T (1)
CNY17-2X009T (1)
CNY17-3X009T (1)
CNY17-4X009T (1)
40 to 80
63 to 125
100 to 200
160 to 320
CNY17-1X001
CNY17-2X001
CNY17-3X001
CNY17-4X001
DIP-6, 400 mil, option 6
VDE, UL, cUL, BSI, FIMKO
DIP-6
160 to 320
DIP-6, 400 mil, option 6
CNY17-1X016
CNY17-2X016
CNY17-3X016
CNY17-4X016
SMD-6, option 7
CNY17-1X017
CNY17-2X017T (1)
CNY17-3X017T (1)
CNY17-4X017T (1)
SMD-6, option 9
-
CNY17-2X019T (1)
-
-
Note
(1) Also available in tubes, do not put T on the end.
Document Number: 83606
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.1, 08-Jan-14
CNY17
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
VR
6
V
Forward current
IF
60
mA
Forward surge current
tp ≤ 10 μs
IFSM
2.5
A
LED power dissipation
at 25 °C
Pdiss
100
mW
Collector emitter breakdown voltage
BVCEO
70
V
Emitter base breakdown voltage
BVEBO
7
V
IC
50
mA
IC
100
mA
Pdiss
150
mW
OUTPUT
Collector current
tp/T = 0.5, tp ≤ 10 ms
Power dissipation
COUPLER
Isolation test voltage between emitter and detector
VISO
5000
VRMS
Storage temperature
t = 1 min
Tstg
-55 to +150
°C
Operating temperature
Tamb
-55 to +110
°C
Tsld
260
°C
Pdiss
250
mW
2 mm from case, ≤ 10 s
Soldering temperature (1)
Total power dissipation
Ptot - Total Power Dissipation (mW)
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through
hole devices (DIP).
300
Coupled device
250
200
Phototransistor
150
100
IR-diode
50
0
0
20
40
60
80
100
120
Tamb - Ambient Temperature (°C)
Fig. 1 - Total Power Dissipation vs. Ambient Temperature
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
1.39
1.65
V
0.01
10
μA
INPUT
Forward voltage
IF = 60 mA
VF
Breakdown voltage
IR = 10 μA
VBR
VR = 6 V
IR
Reverse current
Capacitance
Thermal resistance
VR = 0 V, f = 1 MHz
6
V
CO
25
pF
Rth
750
K/W
Document Number: 83606
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.1, 08-Jan-14
CNY17
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
OUTPUT
Collector emitter capacitance
Collector base capacitance
Emitter base capacitance
Thermal resistance
COUPLER
Collector emitter, saturation voltage
Coupling capacitance
Collector emitter, leakage current
PART
SYMBOL
MIN.
TYP.
VCE = 5 V, f = 1 MHz
VCE = 5 V, f = 1 MHz
VCE = 5 V, f = 1 MHz
CCE
CCB
CEB
Rth
5.2
6.5
7.5
500
VF = 10 mA, IC = 2.5 mA
VCEsat
CC
ICEO
ICEO
ICEO
ICEO
0.25
0.6
2
2
5
5
VCE = 10 V
CNY17-1
CNY17-2
CNY17-3
CNY17-4
MAX.
UNIT
pF
pF
pF
K/W
0.4
50
50
100
100
V
pF
nA
nA
nA
nA
Note
• Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
VCE = 5 V, IF = 10 mA
IC/IF
VCE = 5 V, IF = 1 mA
PART
CNY17-1
CNY17-2
CNY17-3
CNY17-4
CNY17-1
CNY17-2
CNY17-3
CNY17-4
SYMBOL
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
MIN.
40
63
100
160
13
22
34
56
TYP.
MAX.
80
125
200
320
UNIT
%
%
%
%
%
%
%
%
MAX.
UNIT
30
45
70
90
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
LINEAR OPERATION (without saturation)
Turn-on time
IF = 10 mA, VCC = 5 V, RL = 75 Ω
Rise time
IF = 10 mA, VCC = 5 V, RL = 75 Ω
Turn-off time
IF = 10 mA, VCC = 5 V, RL = 75 Ω
Fall time
IF = 10 mA, VCC = 5 V, RL = 75 Ω
Cut-off frequency
IF = 10 mA, VCC = 5 V, RL = 75 Ω
SWITCHING OPERATION (with saturation)
IF = 20 mA
Turn-on time
IF = 10 mA
IF = 5 mA
IF = 20 mA
Rise time
IF = 10 mA
IF = 5 mA
IF = 20 mA
Turn-off time
IF = 10 mA
IF = 5 mA
IF = 20 mA
Fall time
IF = 10 mA
IF = 5 mA
PART
CNY17-1
CNY17-2
CNY17-3
CNY17-4
CNY17-1
CNY17-2
CNY17-3
CNY17-4
CNY17-1
CNY17-2
CNY17-3
CNY17-4
CNY17-1
CNY17-2
CNY17-3
CNY17-4
SYMBOL
MIN.
TYP.
ton
tr
toff
tf
fCO
3
2
2.3
2
110
μs
μs
μs
μs
kHz
ton
ton
ton
ton
tr
tr
tr
tr
toff
toff
toff
toff
tf
tf
tf
tf
3
4.2
4.2
6
2
3
3
4.6
18
23
23
25
11
14
14
15
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
Document Number: 83606
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.1, 08-Jan-14
CNY17
www.vishay.com
+5V
IF
IF
Vishay Semiconductors
IF
0
0
tp
IC
R G = 50 Ω
tp
= 0.01
T
t
100 %
90 %
t p = 50 µs
Channel I
Channel II
50 Ω
Oscilloscope
R L = 1 MΩ
C L = 20 pF
10 %
0
tr
RL
td
ts
t on
95 10804-3
Fig. 2 - Test Circuit, Non-Saturated Operation
IF
tp
td
tr
t on (= td + tr)
Pulse duration
Delay time
Rise time
Turn-on time
tf
t off
ts
tf
t off (= ts + tf)
t
Storage time
Fall time
Turn-off time
96 11698
+5V
I F = 10 mA
0
Fig. 4 - Switching Times
IC
R G = 50 Ω
tp
= 0.01
T
t p = 50 µs
Channel I
Channel II
50 Ω
Oscilloscope
R L ≥ 1 MΩ
C L ≤ 20 pF
1 kΩ
95 10843
Fig. 3 - Test Circuit, Saturated Operation
SAFETY AND INSULATION RATINGS
PARAMETER
SYMBOL
VALUE
UNIT
Output safety power
PSO
700
mW
Input safety current
ISI
400
mA
Safety temperature
TSI
175
°C
Comparative tracking index
CTI
175
MAXIMUM SAFETY RATINGS
INSULATION RATED PARAMETERS
Maximum withstanding isolation voltage
VISO
5000
Maximum transient isolation voltage
VIOTM
8000
Vpeak
Maximum repetitive peak isolation voltage
VIORM
890
Vpeak
VRMS
Insulation resistance
Tamb = 25 °C, VDC = 500 V
RIO
≥ 1012
Ω
Isolation resistance
Tamb = 100 °C, VDC = 500 V
RIO
≥ 1011
Ω
Climatic classification (according to IEC 68 part 1)
55/115/21
Environment (pollution degree in accordance to DIN VDE 0109)
Creepage distance
Clearance distance
Insulation thickness
2
Standard DIP-4
≥7
mm
SMD
≥7
mm
Standard DIP-4
≥8
mm
SMD
≥8
mm
≥ 0.4
mm
DTI
Note
• As per DIN EN 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance
with the safety ratings shall be ensured by means of protective circuits.
Document Number: 83606
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.1, 08-Jan-14
CNY17
www.vishay.com
Vishay Semiconductors
1.8
1.7
Tamb = 25 °C
1.6
Tamb = 0 °C
1.5
1.4
Tamb = - 25 °C
1.3 T = - 55 °C
amb
1.2
1.1
Tamb = 50 °C
1.0
Tamb = 75 °C
0.9
Tamb = 100 °C
0.8
0.7
Tamb = 110 °C
0.6
0.1
1
10
100
10 000
IF = 0 mA
ICE0 - Leakage Current (nA)
VF - Forward Voltage (V)
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1000
100
VCE = 24 V
10
VCE = 12 V
1
0.1
0.01
0.001
- 60 - 40 - 20 0
20
40
60
80 100 120
IF - Forward Current (mA)
Tamb - Ambient Temperature (°C)
Fig. 5 - Forward Voltage vs. Forward Current
Fig. 8 - Leakage Current vs. Ambient Temperature
60
1.2
CTRNorm - Normalized CTR (NS)
IC - Collector Current (mA)
VCE = 40 V
IF = 30 mA
50
40
IF = 20 mA
30
IF = 15 mA
20
IF = 10 mA
10
IF = 5 mA
0
0
1
2
3
4
5
7
6
0.8
0.6
0.4
0.2
0
-60 -40 -20
8
VCE = 5 V
IF = 10 mA
1.0
0
20
40
60
80 100 120
VCE - Collector Emitter Voltage (NS) (V)
Tamb - Ambient Temperature (°C)
Fig. 6 - Collector Current vs. Collector Emitter Voltage (NS)
Fig. 9 - Normalized CTR (NS) vs. Ambient Temperature
25
IC - Collector Current (mA)
20
15
IF = 10 mA
10
IF = 5 mA
5
IF = 1 mA
IF = 2 mA
0
0.1
0
0.2
0.3
0.4
CTRNorm - Normalized CTR (sat)
1.2
IF = 25 mA
VCE = 0.4 V
IF = 10 mA
1.0
0.8
0.6
0.4
0.2
0
-60 -40 -20
0
20
40
60
80 100 120
VCE - Collector Emitter Voltage (sat) (V)
Tamb - Ambient Temperature (°C)
Fig. 7 - Collector Current vs. Collector Emitter Voltage (sat)
Fig. 10 - Normalized CTR (sat) vs. Ambient Temperature
Document Number: 83606
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.1, 08-Jan-14
CNY17
www.vishay.com
1000
1.2
IF = 10 mA
VCE = 5 V
fCTR - -3 dB Frequency (kHz)
CTRNorm - Normalized CTR (NS)
Vishay Semiconductors
Tamb = 25 °C
1.0
Tamb = 0 °C
0.8
Tamb = - 40 °C
Tamb = - 55 °C
0.6
Tamb = 50 °C
Tamb = 75 °C
0.4
Tamb = 100 °C
0.2
VCC = 5 V
100
10
Tamb = 110 °C
0
0.1
1
1
0.1
100
10
1
10
100
IF - Forward Current (mA)
IC - Collector Current (mA)
Fig. 11 - Normalized CTR (NS) vs. Forward Current
Fig. 14 - CTR -3 dB Frequency vs. Collector Current
1000
IF = 10 mA
VCE = 0.4 V
VCE = 5 V, IF = 10 mA
ton, toff - Switching Time (μs)
CTRNorm - Normalized CTR (sat)
1.2
Tamb = 25 °C
1.0
Tamb = 0 °C
Tamb = - 40 °C
0.8
Tamb = - 55 °C
0.6
Tamb = 50 °C
0.4
Tamb = 75 °C
Tamb = 100 °C
0.2
toff
100
10
ton
1
Tamb = 110 °C
0
0.1
1
10
100
0.1
0.1
1
10
100
IF - Forward Current (mA)
RL - Load Resistance (kΩ)
Fig. 12 - Normalized CTR (sat) vs. Forward Current
Fig. 15 - Switching Time vs. Load Resistance
0
VCE = 5 V
- 20
Phase (deg)
- 40
- 60
- 80
- 100
- 120
- 140
- 160
1
10
100
1000
f - Frequency (kHz)
Fig. 13 - CTR Frequency vs. Phase Angle
Document Number: 83606
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.1, 08-Jan-14
CNY17
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
6
5
4
6.5 ± 0.5
1
2
3
7.3 ± 0.5
7.62 ± 0.3
1.1 ± 0.1
3.5 ± 0.3
0.5 typ.
3.3 ± 0.5
2.8 ± 0.5
0.26
0.5 ± 0.1
2.54 ± 0.25
7.62 to 9.98
22530
Option 6
Option 7
7.62 typ.
7.62 typ.
3.5 ± 0.3
7.62 typ.
3.5 ± 0.3
0.35 ± 0.25
0.1 min.
Option 9
0.6 min.
8 min.
2.7 min.
10.16 typ.
0.1 ± 0.1
0.6 min.
3.5 ± 0.3
8.16 ± 0.8
10.16 ± 0.3
10.3 max.
0.76
2.54
R 0.25
0.76
2.54
R 0.25
1.78
8 min.
11.05
20802-34
1.52
1.78
8 min.
11.05
1.52
PACKAGE MARKING
CNY17-3
Pin 1 I.D.
V YWW 25
Notes
• VDE logo is only marked on option 1 parts. Option information is not marked on the part.
• Tape and reel suffix (T) is not part of the package marking.
Document Number: 83606
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.1, 08-Jan-14
CNY17
www.vishay.com
Vishay Semiconductors
TUBE AND TAPE INFORMATION
DEVICES PER TUBE
TYPE
UNITS/TUBE
TUBES/BOX
UNITS/BOX
DIP-6
50
40
2000
Ø 1.55 ± 0.05
2 ± 0.1
4 ± 0.1
1.75 ± 0.1
7.5 ± 0.1
16 ± 0.3
12 ± 0.1
0.3 ± 0.05
22537-1
Fig. 16 - Tape and Reel Drawing, 1000 Units per Reel
Document Number: 83606
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.1, 08-Jan-14
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
Similar pages