EPCOS B37954K5104M070 Multilayer ceramic capacitor Datasheet

Multilayer Ceramic Capacitors
Chip
Z5U (Y5U)
Ordering code system
B37942
K
5
104
M
0
60
Packaging
60
62
70
72
01
^
^
^
^
^
cardboard tape, 180-mm reel
blister tape, 180-mm reel
cardboard tape, 330-mm reel
blister tape, 330-mm reel
bulk case
Internal coding
Capacitance tolerance
M ^ ± 20 % (standard)
Capacitance, coded
(example)
Rated voltage
Termination
104 ^ 10 · 104 pF = 100 nF
105 ^ 10 · 105 pF = 1 mF
224 ^ 22 · 104 pF = 220 nF
Rated voltage [VDC]
Code
Standard:
25
0
50
5
K ^ nickel barrier for case sizes 0603, 0805, 1206, 1210
J ^ silver palladium for case sizes 1812, 2220
Type and size
Chip size
(inch / mm)
Temperature characteristic
Z5U (Y5U)
0603 / 1608
0805 / 2012
1206 / 3216
1210 / 3225
1812 / 4532
2220 / 5750
B37932
B37942
B37873
B37951
B37954
B37957
80
10/02
Multilayer Ceramic Capacitors
Chip
Z5U (Y5U)
Features
■ Extremely high volumetric efficiency
■ Non-linear capacitance change
■ Y5U characteristic is also fulfilled
Applications
■
■
■
■
Blocking
Coupling
Decoupling
Interference suppression
Termination
■ For soldering: Nickel-barrier termination (Ni) for case sizes 0603 to 1210
Silver-palladium termination (AgPd) for case sizes 1812 and 2220
Delivery mode
■ Cardboard and blister tape (blister tape for chip thickness ³ 1,2 ± 0,1 mm and case sizes ³ 1210),
180-mm and 330-mm reel available
■ Bulk case for case sizes 0603 and 0805 (³ 68 nF)
Electrical data
Temperature characteristic
Climatic category (IEC 60068-1)
Standard
Dielectric
Rated voltage 2)
Test voltage
Capacitance range
Max. relative capacitance change
Dissipation factor (limit value)
Insulation resistance 3) at +25 °C
Time constant 3) at +25 °C
Operating temperature range
Ageing 4)
1)
2)
3)
4)
VR
Vtest
CR
DC/C
tan d
Rins
t
Top
Y5U specification is also fulfilled.
Note: No operation on AC line.
For CR > 10 nF the time constant t = C · Rins is given.
Refer to chapter “General Technical Information”, page 197.
81
10/02
Z5U (Y5U) 1)
30/85/56
EIA
Class 2
25, 50
2,5 · VR/5 s
10 nF … 4,7 m F
+22/–56
< 50 · 10 –3
> 104
> 500
–30 … +85
yes
VDC
VDC
%
MW
s
°C
Multilayer Ceramic Capacitors
Z5U
(Y5U)
Z5U (Y5U)
Capacitance tolerances
Code letter
M
(standard)
Tolerance
± 20%
Dimensional drawing
ss
b
k
k
k
KKE0272-V
k
KKE0329-N
Dimensions (mm)
Case size
0603
1608
0805
2012
1206
3216
1210
3225
l
1,6 ± 0,15
2,0 ± 0,20
3,2 ± 0,20
3,2 ± 0,30
b
0,8 ± 0,10
1,25 ± 0,15
1,6 ± 0,15
2,5 ± 0,30
s
0,8 ± 0,10
1,30 max.
1,30 max.
1,30 max.
k
0,1 – 0,4
0,13 – 0,75
0,25 – 0,75
0,25 – 0,75
1812
4532
2220
5750
l
4,5 ± 0,30
5,7 ± 0,40
b
3,2 ± 0,30
5,0 ± 0,40
s
1,30 max.
1,30 max.
k
0,25 – 1,0
0,25 – 1,0
Case size
(inch)
(mm)
(inch)
(mm)
Tolerances to CECC 32101-801
82
10/02
Multilayer Ceramic Capacitors
Z5U
(Y5U)
Z5U (Y5U)
Recommended solder pad
C
A
D
KKE0308-1
Maximum dimensions (mm)
Case size
(inch/mm)
Type
A
C
D
0603/1608
single chip
1,0
3,0
1,0
0805/2012
single chip
1,2
3,4
1,3
1206/3216
single chip
1,2
4,5
1,8
1210/3225
single chip
1,2
4,5
2,8
1812/4532
single chip
1,5
6,0
3,6
2220/5750
single chip
1,5
7,2
5,5
Termination
Termination
(nickel barrier)
Ceramic body
Inner electrode
Substrate electrode
Intermediate electrode
External electrode
AgPd
Ag
Ni
Sn
KKE0484-W
83
10/02
Multilayer Ceramic Capacitors
Z5U
(Y5U)
Z5U (Y5U)
Product range chip capacitors
Z5U (Y5U)
Size1)
inch
mm
Type
VR (VDC)
CR
10
nF
15
nF
22
nF
33
nF
47
nF
68
nF
100
nF
150
nF
220
nF
330
nF
470
nF
680
nF
0603
1608
0805
2012
1206
3216
1210
3225
1812
4532
2220
5750
B37932
B37942
B37873
B37951
B37954
B37957
25
50
25
50
25
50
1,0 m F
1,5 m F
2,2 m F
3,3 m F
4,7 m F
1) l ´ b (inch) / l ´ b (mm)
84
10/02
50
50
50
Multilayer Ceramic Capacitors
Z5U
(Y5U)
Z5U (Y5U); 0603 to 1206
Ordering codes and packing for Z5U (Y5U), 25 VDC, nickel-barrier terminations
mm
Cardboard tape,
Æ 180-mm reel
** ^ 60
pcs/reel
Cardboard tape, Bulk case
Æ 330-mm reel
** ^ 70
** ^ 01
pcs/reel
pcs
0,8 ± 0,1
4000
16000
15000
0,8 ± 0,1
0,8 ± 0,1
4000
4000
16000
16000
–
–
1,2 ± 0,1
30001)
12000 2)
–
Chip
thickness
CR
Ordering code
Case size 0603, 25 VDC
100, nF
B37932K0104M0**
Case size 0805, 25 VDC
150, nF
220, nF
B37942K0154M0**
B37942K0224M0**
Case size 1206, 25 VDC
1,0 m F
B37873K0105M0**
1) Blister tape, 180-mm reel, ordering code ** ^ 62
2) Blister tape, 330-mm reel, ordering code ** ^ 72
85
10/02
Multilayer Ceramic Capacitors
Z5U
(Y5U)
Z5U (Y5U); 0603 to 1210
Ordering codes and packing for Z5U (Y5U), 50 VDC, nickel-barrier terminations
mm
Cardboard tape,
Æ 180-mm reel
** ^ 60
pcs/reel
Cardboard tape, Bulk case
Æ 330-mm reel
** ^ 70
** ^ 01
pcs/reel
pcs
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
4000
4000
4000
16000
16000
16000
15000
15000
15000
0,6 ± 0,1
0,6 ± 0,1
0,6 ± 0,1
0,8 ± 0,1
5000
5000
5000
4000
20000
20000
20000
16000
10000
10000
10000
–
0,8 ± 0,1
0,8 ± 0,1
1,2 ± 0,1
4000
4000
30001)
16000
16000
12000 2)
–
–
–
0,8 ± 0,1
1,2 ± 0,1
40001)
30001)
16000 2)
12000 2)
–
–
Chip
thickness
CR
Ordering code
Case size 0603, 50 VDC
10, nF
22, nF
47, nF
B37932K5103M0**
B37932K5223M0**
B37932K5473M0**
Case size 0805, 50 VDC
10,
22,
47,
100,
nF
nF
nF
nF
B37942K5103M0**
B37942K5223M0**
B37942K5473M0**
B37942K5104M0**
Case size 1206, 50 VDC
100, nF
220, nF
470, nF
B37873K5104M0**
B37873K5224M0**
B37873K5474M0**
Case size 1210, 50 VDC
470, nF
1,0 m F
B37951K5474M0**
B37951K5105M0**
1) Blister tape, 180-mm reel, ordering code ** ^ 62
2) Blister tape, 330-mm reel, ordering code ** ^ 72
86
10/02
Multilayer Ceramic Capacitors
Z5U
(Y5U)
Z5U (Y5U); 1812 and 2220
Ordering codes and packing for Z5U (Y5U), 50 VDC, silver-palladium terminations
mm
Blister tape,
Æ 180-mm reel
** ^ 62
pcs/reel
Blister tape,
Æ 330-mm reel
** ^ 72
pcs/reel
1,2 ± 0,1
1,2 ± 0,1
1,2 ± 0,1
1500
1500
1500
5000
5000
5000
1,2 ± 0,1
1,2 ± 0,1
1,2 ± 0,1
1500
1500
1500
5000
5000
5000
Chip
thickness
CR
Ordering code
Case size 1812, 50 VDC
680, nF
1,0 m F
1,5 m F
B37954J5684M0**
B37954J5105M0**
B37954J5155M0**
Case size 2220, 50 VDC
1,0 m F
2,2 m F
4,7 m F
B37957J5105M0**
B37957J5225M0**
B37957J5475M0**
87
10/02
Multilayer Ceramic Capacitors
Z5U
(Y5U)
Z5U (Y5U)
Typical characteristics
Capacitance change DC/C25 versus
temperature T
Capacitance change DC/C0 versus
superimposed DC voltage V
Impedance |Z | versus
frequency f
Dissipation factor tan d versus
temperature T
KKE0128-3
10 2
10
_1
KKE0122-N
Ω
tan δ
Z
10 1
10 0
10
10 nF
100 nF
10
_2
_1
1 µF
10
_2
10 0
_
10 1
10 2
10 _3 _ _
60 40 20 0 20 40 60 80 100 ˚C 140
T
MHz 10 3
f
88
10/02
Multilayer Ceramic Capacitors
Z5U
(Y5U)
Z5U (Y5U)
Typical characteristics
Capacitance change DC/C1 versus
time t
Insulation resistance Rins versus
temperature T
KKE0131-M
10 8
MΩ
KKE0104-Q
5
∆C %
C1
0
R ins
10 6
_5
10 5
_ 10
10
4
_ 15
10 3
10 2
0
20
40
60
80
100
_ 20
˚C 140
T
10 0
89
10/02
10 1
10 2
h 10 3
t
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG
oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without
EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics
Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please
also contact one of our Sales Offices.
Similar pages