EPCOS B41821A2478M003 Single-ended capacitor Datasheet

Aluminum electrolytic capacitors
Single-ended capacitors
Series/Type:
B41821, B43821
Date:
December 2006
 EPCOS AG 2007. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Single-ended capacitors
B41821, B43821
Standard series 85 °C
General-purpose grade capacitors
Applications
General-purpose applications in the entertainment industry
Semi-professional to professional application range
For filtering, coupling and pulse circuits
Features
Compact dimensions
High CV product, i.e. very compact
Good electrical characteristics
Construction
Radial leads
Charge-discharge proof, polar
Aluminum case with insulating sleeve
Minus pole marking on the insulating sleeve
Case with safety vent from diameter 6.3 mm
Delivery mode
Terminal configurations and packing:
Bulk
Taped, Ammo pack
Cut
Kinked
PAPR (protection against polarity reversal):
crimped leads, J leads, bent leads
Refer to chapter "Single-ended capacitors Taping, packing
and lead configurations" for further details and ordering
example.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 36
B41821, B43821
Standard series 85 °C
Specifications and characteristics in brief
Series
Rated voltage VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
B41821
6.3 ... 100 V DC
1.15 VR
0.1 ... 10000 µF
±20% M
B43821
160 ... 450 V DC
1.1 VR
0.47 ... 560 µF
±20% M
Dissipation factor tan δ
(20 °C, 120 Hz)
For capacitance higher than 1000 µF add 0.02 for every increase of
1000 µF.
VR (V DC)
6.3
10
16
25
35
50
63
100 160 ...
450
tan δ (max.)
0.28 0.24 0.20 0.16 0.14 0.12 0.12 0.10 0.20
Leakage current Ileak
(20 °C, 5 min)
Self-inductance ESL
Useful life
85 °C, VR, IAC,R
40 °C, VR, 1.3 IAC,R
40 °C, VR, 1.6 IAC,R
Requirements
Voltage endurance test
85 °C, VR
or 3 µA, whichever is greater
Diameter (mm) ≤ 6.3
8 ... 12.5
16
18
20 ...
25
ESL (nH)
26
34
40
15
20
> 2000 h
> 100000 h
∆C/C
tan δ
Ileak
> 3000 h
> 100000 h
≤ ±45% of initial value
≤ 3 times initial specified limit
≤ initial specified limit
2000 h
2000 h
Post test requirements
∆C/C
tan δ
Ileak
Vibration resistance test
To IEC 60068-2-6, test Fc:
Displacement amplitude 0.75 mm, frequency range 10 ... 2000 Hz,
acceleration max. 20 g, duration 3 × 2 h.
Capacitor rigidly clamped by the aluminum case.
IEC climatic category
To IEC 60068-1:
VR ≤ 250 V: 40/085/56 (40 °C/+85 °C/56 days damp heat test)
VR ≥ 350 V: 25/085/56 (25 °C/+85 °C/56 days damp heat test)
Sectional specification
IEC 60384-4
Please read Cautions and warnings and
Important notes at the end of this document.
≤ ±30% of initial value
≤ 2 times initial specified limit
≤ initial specified limit
Page 3 of 36
B41821, B43821
Standard series 85 °C
Dimensional drawings
With stand-off rubber seal
Diameters (mm):
6.3, 8, 10, 12.5, 16, 18, 22, 25
With flat rubber seal
Diameters (mm):
5, 8, 20
Safety vent for diameter ≥ 6.3 mm.
Dimensions and weights
Dimensions (mm)
d +0.5
5
6.3
8
10
10
10
12.5
12.5
16
16
16
18
18
18
20
20
20
22
22
25
l
11 +1.0
11 +1.0
11.5 +1.5
12.5 +1.0
16 +1.0
20 +2.0
20 +2.0
25 +2.0
20 +2.0
25 +2.0
31.5 +2.0
31.5 +2.0
35 +2.0
40 +2.0
30 +2.0
35 +2.0
40 +2.0
35 +2.0
40 +2.0
40 +2.0
Please read Cautions and warnings and
Important notes at the end of this document.
a ±0.5
2.0
2.5
3.5
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
10.0
10.0
10.0
10.0
10.0
12.5
Page 4 of 36
b
0.50 ±0.05
0.50 ±0.05
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.80 ±0.05
0.80 ±0.05
0.80 ±0.05
0.80 ±0.1
0.80 ±0.1
0.80 ±0.1
1.0 ±0.1
1.0 ±0.1
1.0 ±0.1
1.0 ±0.1
1.0 ±0.1
1.0 ±0.1
Approx. weight
g
0.5
0.7
1.0
1.6
1.9
2.6
3.6
4.5
5.5
7.5
7.8
11.0
13.0
16.0
14.0
18.0
20.0
21.0
23.0
25.0
B41821
Standard series 85 °C
Overview of available types B41821
Other voltage and capacitance ratings are available upon request.
VR (V DC)
6.3
10
16
25
35
Case dimensions d × l (mm)
CR (µF)
33
47
5
68
× 11
5
× 11
5
× 11
5
× 11
5
× 11
6.3 × 11
100
5
× 11
6.3 × 11
6.3 × 11
150
6.3 × 11
6.3 × 11
6.3 × 11
8
× 11.5
8
× 11.5
8
× 11.5
220
6.3 × 11
6.3 × 11
6.3 × 11
270
6.3 × 11
6.3 × 11
8
× 11.5
8
× 11.5
10
× 12.5
330
6.3 × 11
8
× 11.5
8
× 11.5
8
10
× 11.5
× 12.5
10
× 12.5
470
8
× 11.5
8
× 11.5
8
× 11.5
10
× 12.5
10
× 16
560
8
× 11.5
8
× 11.5
10
× 12.5
10
× 16
10
× 20
680
10
× 12.5
10
× 12.5
10
× 12.5
10
× 16
10
× 20
1000
10
× 12.5
10
× 12.5
10
× 16
10
× 20
12.5 × 20
1500
10
× 16
10
× 20
10
× 20
12.5 × 20
16
× 20
2200
10
× 20
10
× 20
12.5 × 20
12.5 × 25
16
× 25
3300
10
× 20
12.5 × 25
12.5 × 25
16 × 25
16
× 25
16
× 31.5
4700
12.5 × 25
16
× 20
16
× 25
16
× 31.5
18
× 35
6800
16
× 25
16
18
× 31.5
× 31.5
18
× 35
18
× 40
8200
16
× 31.5
18
× 31.5
18
× 40
10000
18
× 31.5
18
× 35
20
× 40
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 36
B41821
Standard series 85 °C
VR (V DC)
50
63
100
Case dimensions d × l (mm)
CR (µF)
0.10
5
× 11
0.22
5
× 11
0.33
5
× 11
0.47
5
× 11
0.68
5
× 11
1.0
5
× 11
1.5
5
× 11
2.2
5
× 11
3.3
5
× 11
4.7
5
× 11
6.8
5
× 11
× 11
10
5
× 11
5
22
5
× 11
5 × 11
6.3 × 11
6.3 × 11
8
× 11.5
33
6.3 × 11
6.3 × 11
10
× 12.5
47
6.3 × 11
6.3 × 11
8 × 11.5
10
× 12.5
68
6.3 × 11
8
× 11.5
10
× 16
100
8
× 11.5
8
× 11.5
10
× 20
150
8
× 11.5
10
× 12.5
12.5 × 25
220
10
× 12.5
10
× 16
12.5 × 25
270
10
× 16
10
× 20
16
× 25
330
10
× 16
10
× 20
16
× 25
470
10
× 20
12.5 × 20
12.5 × 25
16
× 31.5
560
12.5 × 20
12.5 × 25
16
× 31.5
680
12.5 × 20
16
× 20
18
× 40
1000
12.5 × 25
16
16
× 25
× 31.5
20
× 40
1500
16
× 25
18
× 31.5
2200
16
18
× 31.5
× 35
18
18
× 35
× 40
3300
18
× 35
20
× 40
4700
20
× 40
25
× 40
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 36
B43821
Standard series 85 °C
Overview of available types B43821
Other voltage and capacitance ratings are available upon request.
VR (V DC)
160
200
250
350
400
450
Case dimensions d × l (mm)
CR (µF)
0.47
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
0.68
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
1.0
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
1.5
6.3 × 11
6.3 × 11
6.3 × 11
8
× 11.5
2.2
6.3 × 11
6.3 × 11
6.3 × 11
8
× 11.5
10
× 12.5
10
× 12.5
3.3
6.3 × 11
6.3 × 11
8
× 11.5
10
× 12.5
10
× 12.5
10
× 16
4.7
6.3 × 11
8
× 11.5
8
× 11.5
10
× 12.5
10
× 16
10
× 16
6.8
8
× 11.5
10
× 12.5
10
× 12.5
10
× 16
10
× 16
10
× 20
10
8
× 11.5
10
× 12.5
10
10
× 12.5
× 16
10
× 20
10
× 20
10
× 20
22
10
10
× 12.5
× 16
10
10
× 16
× 20
10
× 20
12.5 × 25
12.5 × 25
33
10
10
× 16
× 20
10
× 20
12.5 × 20
12.5 × 25
16
× 20
16
16
× 25
× 31.5
47
12.5 × 20
12.5 × 25
12.5 × 20
12.5 × 25
12.5 × 25
16 × 20
16
× 25
16
× 25
16
18
× 31.5
× 31.5
68
12.5 × 25
16 × 20
12.5 × 25
16 × 20
16
× 25
18
× 31.5
18
× 31.5
18
× 35
100
12.5 × 25
16 × 25
16
× 25
16
× 31.5
18
20
× 35
× 30
18
20
× 40
× 35
20
× 40
150
16
× 31.5
18
× 31.5
18
× 40
20
× 40
20
× 40
220
16
18
× 31.5
× 31.5
18
× 35
18
× 40
270
18
18
× 35
× 40
20
× 35
22
× 35
330
18
20
× 35
× 30
22
× 35
22
× 40
470
22
× 35
560
22
× 40
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 36
12.5 × 25
16 × 25
B41821
Standard series 85 °C
Technical data and ordering codes B41821
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
ESRmax
120 Hz
20 °C
Ω
VR = 6.3 V DC
220
6.3 × 11
270
6.3 × 11
330
6.3 × 11
470
8 × 11.5
560
8 × 11.5
680
10 × 12.5
1000
10 × 12.5
1500
10 × 16
2200
10 × 20
3300
10 × 20
4700
12.5 × 25
VR = 10 V DC
100
5 × 11
150
6.3 × 11
220
6.3 × 11
270
6.3 × 11
330
8 × 11.5
470
8 × 11.5
560
8 × 11.5
680
10 × 12.5
1000
10 × 12.5
1500
10 × 20
2200
10 × 20
3300
12.5 × 25
4700
16 × 20
6800
16 × 25
8200
16 × 31.5
10000
18 × 31.5
ESRmax
10 kHz
20 °C
Ω
Zmax
100 kHz
20 °C
Ω
IAC,R
120 Hz
85 °C
mA
Ordering code
(composition see
below)
2.1
1.7
1.4
1.0
0.83
0.68
0.46
0.31
0.23
0.16
0.12
1.6
1.3
1.1
0.77
0.64
0.52
0.35
0.24
0.18
0.12
0.09
1.5
1.2
1.0
0.71
0.59
0.49
0.33
0.22
0.16
0.11
0.09
230
250
280
380
410
520
650
750
1000
1190
1600
B41821A2227M***
B41821A2277M***
B41821A2337M***
B41821A2477M***
B41821A2567M***
B41821A2687M***
B41821A2108M***
B41821A2158M***
B41821A2228M***
B41821A2338M***
B41821A2478M***
4.0
2.7
1.8
1.5
1.2
0.85
0.71
0.59
0.40
0.27
0.20
0.14
0.11
0.08
0.08
0.07
3.1
2.1
1.4
1.2
0.92
0.65
0.55
0.45
0.31
0.21
0.15
0.11
0.08
0.06
0.06
0.05
2.90
1.90
1.30
1.10
0.86
0.61
0.51
0.42
0.29
0.19
0.14
0.10
0.08
0.06
0.06
0.05
145
160
240
255
290
400
410
460
650
740
1100
1550
1700
2250
2300
2600
B41821A3107M***
B41821A3157M***
B41821A3227M***
B41821F3277M***
B41821A3337M***
B41821A3477M***
B41821F3567M***
B41821A3687M***
B41821A3108M***
B41821A3158M***
B41821A3228M***
B41821A3338M***
B41821A3478M***
B41821F3688M***
B41821F3828M***
B41821F3109M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ∅ ≥ 10 mm)
002 = for cut leads, bulk (for ∅ ≥ 10 mm)
003 = for crimped leads, blister (for ∅ ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for ∅ 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 36
B41821
Standard series 85 °C
Technical data and ordering codes B41821
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
ESRmax
120 Hz
20 °C
Ω
VR = 16 V DC
68
5 × 11
100
5 × 11
150
6.3 × 11
220
6.3 × 11
270
8 × 11.5
330
8 × 11.5
470
8 × 11.5
560
10 × 12.5
680
10 × 12.5
1000
10 × 16
1500
10 × 20
2200
12.5 × 20
3300
12.5 × 25
3300
16 × 25
4700
16 × 25
6800
16 × 31.5
6800
18 × 31.5
8200
18 × 31.5
10000
18 × 35
VR = 25 V DC
47
5 × 11
100
6.3 × 11
150
6.3 × 11
220
8 × 11.5
270
8 × 11.5
330
8 × 11.5
330
10 × 12.5
470
10 × 12.5
ESRmax
10 kHz
20 °C
Ω
Zmax
100 kHz
20 °C
Ω
IAC,R
120 Hz
85 °C
mA
Ordering code
(composition see
below)
4.9
3.3
2.2
1.5
1.2
1.0
0.71
0.59
0.49
0.33
0.22
0.17
0.12
0.12
0.09
0.07
0.07
0.07
0.06
3.8
2.6
1.7
1.2
0.94
0.77
0.54
0.46
0.38
0.26
0.17
0.13
0.09
0.09
0.07
0.06
0.06
0.05
0.05
3.50
2.40
1.60
1.10
0.88
0.72
0.50
0.42
0.35
0.24
0.16
0.12
0.09
0.09
0.07
0.05
0.05
0.05
0.04
100
180
185
260
270
370
440
550
600
790
950
1300
1700
1800
2100
2300
2400
2450
2750
B41821A4686M***
B41821A4107M***
B41821A4157M***
B41821F4227M***
B41821A4277M***
B41821A4337M***
B41821F4477M***
B41821A4567M***
B41821F4687M***
B41821A4108M***
B41821F4158M***
B41821K4228M***
B41821F4338M***
B41821A4338M***
B41821A4478M***
B41821F4688M***
B41821A4688M***
B41821F4828M***
B41821F4109M***
5.6
2.7
1.8
1.2
1.0
0.80
0.80
0.56
4.3
2.0
1.4
0.93
0.76
0.62
0.62
0.43
4.0
1.9
1.3
0.86
0.70
0.57
0.57
0.40
115
190
195
330
350
440
440
550
B41821A5476M***
B41821A5107M***
B41821F5157M***
B41821A5227M***
B41821F5277M***
B41821F5337M***
B41821A5337M***
B41821B5477M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ∅ ≥ 10 mm)
002 = for cut leads, bulk (for ∅ ≥ 10 mm)
003 = for crimped leads, blister (for ∅ ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for ∅ 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 36
B41821
Standard series 85 °C
Technical data and ordering codes B41821
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
ESRmax
120 Hz
20 °C
Ω
VR = 25 V DC
560
10 × 16
680
10 × 16
1000
10 × 20
1500
12.5 × 20
2200
12.5 × 25
3300
16 × 25
4700
16 × 31.5
6800
18 × 35
8200
18 × 40
10000
20 × 40
VR = 35 V DC
33
5 × 11
47
5 × 11
68
6.3 × 11
100
6.3 × 11
150
8 × 11.5
220
8 × 11.5
270
10 × 12.5
330
10 × 12.5
470
10 × 16
560
10 × 20
680
10 × 20
1000
12.5 × 20
1500
16 × 20
2200
16 × 25
3300
16 × 31.5
4700
18 × 35
6800
18 × 40
ESRmax
10 kHz
20 °C
Ω
Zmax
100 kHz
20 °C
Ω
IAC,R
120 Hz
85 °C
mA
Ordering code
(composition see
below)
0.47
0.39
0.27
0.18
0.14
0.10
0.08
0.06
0.06
0.06
0.36
0.30
0.20
0.14
0.10
0.08
0.06
0.05
0.05
0.04
0.34
0.28
0.19
0.13
0.10
0.07
0.06
0.05
0.04
0.04
580
630
960
1100
1550
1980
2450
2650
2750
2900
B41821A5567M***
B41821F5687M***
B41821A5108M***
B41821F5158M***
B41821F5228M***
B41821A5338M***
B41821A5478M***
B41821F5688M***
B41821F5828M***
B41821F5109M***
7.0
4.9
3.4
2.3
1.5
1.1
0.86
0.70
0.49
0.41
0.34
0.23
0.15
0.12
0.09
0.07
0.06
5.4
3.8
2.6
1.8
1.2
0.81
0.66
0.54
0.38
0.32
0.26
0.18
0.12
0.09
0.07
0.05
0.05
5.0
3.5
2.4
1.7
1.1
0.75
0.61
0.50
0.35
0.30
0.24
0.17
0.11
0.09
0.06
0.05
0.04
105
130
160
210
300
385
430
490
650
770
840
1150
1400
1800
2100
2550
2800
B41821A7336M***
B41821A7476M***
B41821A7686M***
B41821F7107M***
B41821A7157M***
B41821F7227M***
B41821A7277M***
B41821A7337M***
B41821A7477M***
B41821A7567M***
B41821A7687M***
B41821K7108M***
B41821F7158M***
B41821F7228M***
B41821F7338M***
B41821F7478M***
B41821K7688M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ∅ ≥ 10 mm)
002 = for cut leads, bulk (for ∅ ≥ 10 mm)
003 = for crimped leads, blister (for ∅ ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for ∅ 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 36
B41821
Standard series 85 °C
Technical data and ordering codes B41821
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 50 V DC
10
5 × 11
22
5 × 11
33
6.3 × 11
47
6.3 × 11
68
6.3 × 11
100
8 × 11.5
150
8 × 11.5
220
10 × 12.5
270
10 × 16
330
10 × 16
470
10 × 20
560
12.5 × 20
680
12.5 × 20
1000
12.5 × 25
1500
16 × 25
2200
16 × 31.5
2200
18 × 35
3300
18 × 35
4700
20 × 40
VR = 63 V DC
6.8
5 × 11
10
5 × 11
22
5 × 11
22
6.3 × 11
33
6.3 × 11
47
6.3 × 11
47
8 × 11.5
68
8 × 11.5
ESRmax
120 Hz
20 °C
Ω
ESRmax
10 kHz
20 °C
Ω
Zmax
100 kHz
20 °C
Ω
IAC,R
120 Hz
85 °C
mA
Ordering code
(composition see
below)
20
9.0
6.0
4.2
2.9
2.0
1.3
0.90
0.74
0.60
0.42
0.36
0.29
0.20
0.13
0.11
0.11
0.08
0.06
15
7.0
4.6
3.3
2.3
1.5
1.0
0.70
0.57
0.46
0.33
0.27
0.23
0.15
0.10
0.08
0.08
0.06
0.05
14
6.5
4.3
3.0
2.1
1.4
0.95
0.65
0.53
0.43
0.30
0.25
0.21
0.14
0.09
0.08
0.08
0.06
0.05
60
95
110
155
210
260
300
430
520
590
760
930
1000
1350
1800
1980
2200
2500
2800
B41821A6106M***
B41821A6226M***
B41821A6336M***
B41821A6476M***
B41821F6686M***
B41821A6107M***
B41821F6157M***
B41821A6227M***
B41821A6277M***
B41821A6337M***
B41821A6477M***
B41821F6567M***
B41821F6687M***
B41821F6108M***
B41821F6158M***
B41821F6228M***
B41821A6228M***
B41821F6338M***
B41821K6478M***
29
20
9.0
9.0
6.0
4.2
4.2
2.9
23
15
7.0
7.0
4.6
3.3
3.3
2.3
21
14
6.5
6.5
4.3
3.0
3.0
2.1
50
65
100
110
140
170
180
220
B41821A8685M***
B41821A8106M***
B41821F8226M***
B41821A8226M***
B41821A8336M***
B41821F8476M***
B41821A8476M***
B41821F8686M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ∅ ≥ 10 mm)
002 = for cut leads, bulk (for ∅ ≥ 10 mm)
003 = for crimped leads, blister (for ∅ ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for ∅ 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 36
B41821
Standard series 85 °C
Technical data and ordering codes B41821
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 63 V DC
100
8 × 11.5
150
10 × 12.5
220
10 × 16
270
10 × 20
330
10 × 20
470
12.5 × 20
470
12.5 × 25
560
12.5 × 25
680
16 × 20
1000
16 × 25
1000
16 × 31.5
1500
18 × 31.5
2200
18 × 35
2200
18 × 40
3300
20 × 40
4700
25 × 40
VR = 100 V DC
0.1
5 × 11
0.22
5 × 11
0.33
5 × 11
0.47
5 × 11
0.68
5 × 11
1
5 × 11
1.5
5 × 11
2.2
5 × 11
3.3
5 × 11
4.7
5 × 11
10
6.3 × 11
ESRmax
120 Hz
20 °C
Ω
2.0
1.3
0.90
0.74
0.60
0.42
0.42
0.36
0.29
0.20
0.20
0.13
0.11
0.11
0.08
0.06
1658
754
502
353
244
166
111
75
50
35
17
ESRmax
10 kHz
20 °C
Ω
1.5
1.0
0.70
0.57
0.46
0.33
0.33
0.27
0.23
0.15
0.15
0.10
0.08
0.08
0.06
0.05
1275
580
386
271
188
128
85
58
39
27
13
Zmax
100 kHz
20 °C
Ω
1.4
0.95
0.65
0.53
0.43
0.30
0.30
0.25
0.21
0.14
0.14
0.09
0.08
0.08
0.06
0.05
1184
538
359
252
174
118
79
54
36
25
12
IAC,R
120 Hz
85 °C
mA
Ordering code
(composition see
below)
280
360
490
580
710
900
930
1000
1100
1300
1400
1800
2300
2400
2700
3200
B41821F8107M***
B41821F8157M***
B41821A8227M***
B41821A8277M***
B41821A8337M***
B41821F8477M***
B41821A8477M***
B41821F8567M***
B41821F8687M***
B41821F8108M***
B41821A8108M***
B41821F8158M***
B41821K8228M***
B41821F8228M***
B41821A8338M***
B41821F8478M***
2
5
7
10
13
21
24
30
40
45
75
B41821A9104M***
B41821A9224M***
B41821A9334M***
B41821A9474M***
B41821A9684M***
B41821A9105M***
B41821A9155M***
B41821A9225M***
B41821A9335M***
B41821A9475M***
B41821A9106M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ∅ ≥ 10 mm)
002 = for cut leads, bulk (for ∅ ≥ 10 mm)
003 = for crimped leads, blister (for ∅ ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for ∅ 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 36
B41821
Standard series 85 °C
Technical data and ordering codes B41821
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
ESRmax
120 Hz
20 °C
Ω
VR = 100 V DC
22
8 × 11.5
33
10 × 12.5
47
10 × 12.5
68
10 × 16
100
10 × 20
150
12.5 × 25
220
12.5 × 25
270
16 × 25
330
16 × 25
470
16 × 31.5
560
16 × 31.5
680
18 × 40
1000
20 × 40
7.5
5.0
3.5
2.4
1.7
1.1
0.75
0.61
0.50
0.35
0.30
0.24
0.17
ESRmax
10 kHz
20 °C
Ω
5.8
3.9
2.7
1.9
1.3
0.85
0.58
0.47
0.39
0.27
0.23
0.19
0.13
Zmax
100 kHz
20 °C
Ω
5.4
3.6
2.5
1.7
1.2
0.79
0.54
0.44
0.36
0.25
0.21
0.17
0.12
IAC,R
120 Hz
85 °C
mA
Ordering code
(composition see
below)
140
190
230
280
350
550
620
770
800
1000
1050
1100
1400
B41821A9226M***
B41821A9336M***
B41821B9476M***
B41821A9686M***
B41821A9107M***
B41821A9157M***
B41821A9227M***
B41821A9277M***
B41821A9337M***
B41821A9477M***
B41821A9567M***
B41821F9687M***
B41821A9108M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ∅ ≥ 10 mm)
002 = for cut leads, bulk (for ∅ ≥ 10 mm)
003 = for crimped leads, blister (for ∅ ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for ∅ 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 36
B43821
Standard series 85 °C
Technical data and ordering codes B43821
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
ESRmax
120 Hz
20 °C
Ω
ESRmax
10 kHz
20 °C
Ω
Zmax
100 kHz
20 °C
Ω
IAC,R
120 Hz
85 °C
mA
Ordering code
(composition see below)
VR = 160 V DC
0.47
6.3 × 11
0.68
6.3 × 11
1
6.3 × 11
1.5
6.3 × 11
2.2
6.3 × 11
3.3
6.3 × 11
4.7
6.3 × 11
6.8
8 × 11.5
10
8 × 11.5
22
10 × 12.5
22
10 × 16
33
10 × 16
33
10 × 20
47
12.5 × 20
47
12.5 × 25
68
12.5 × 25
68
16 × 20
100
12.5 × 25
100
16 × 25
150
16 × 31.5
220
16 × 31.5
220
18 × 31.5
270
18 × 35
270
18 × 40
330
18 × 35
330
20 × 30
470
22 × 35
560
22 × 40
395
273
186
124
85
56
40
27
18
13
8.4
7.5
5.6
4.5
4.0
2.7
2.7
2.3
1.8
1.2
1.0
0.84
0.75
0.67
0.70
0.56
0.40
0.33
296
205
139
93
63
42
30
21
14
9.5
6.3
5.6
4.2
3.4
3.0
2.1
2.1
1.7
1.4
0.92
0.71
0.63
0.56
0.50
0.53
0.42
0.30
0.25
158
109
74
50
34
22
16
11
7.4
5.0
3.4
3.0
2.2
1.8
1.6
1.1
1.1
0.92
0.74
0.49
0.38
0.34
0.30
0.27
0.28
0.22
0.16
0.13
15
18
22
30
33
40
50
65
80
130
155
180
205
270
290
350
365
430
475
600
760
800
900
950
995
1000
1300
1500
B43821A1474M***
B43821A1684M***
B43821A1105M***
B43821A1155M***
B43821A1225M***
B43821A1335M***
B43821F1475M***
B43821A1685M***
B43821F1106M***
B43821F1226M***
B43821A1226M***
B43821F1336M***
B43821A1336M***
B43821F1476M***
B43821A1476M***
B43821F1686M***
B43821A1686M***
B43821F1107M***
B43821A1107M***
B43821A1157M***
B43821F1227M***
B43821A1227M***
B43821F1277M***
B43821A1277M***
B43821F1337M***
B43821A1337M***
B43821A1477M***
B43821A1567M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ∅ ≥ 10 mm)
002 = for cut leads, bulk (for ∅ ≥ 10 mm)
003 = for crimped leads, blister (for ∅ ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for ∅ 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 36
B43821
Standard series 85 °C
Technical data and ordering codes B43821
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
ESRmax
120 Hz
20 °C
Ω
ESRmax
10 kHz
20 °C
Ω
Zmax
100 kHz
20 °C
Ω
IAC,R
120 Hz
85 °C
mA
Ordering code
(composition see below)
VR = 200 V DC
0.47
6.3 × 11
0.68
6.3 × 11
1
6.3 × 11
1.5
6.3 × 11
2.2
6.3 × 11
3.3
6.3 × 11
4.7
8 × 11.5
6.8
10 × 12.5
10
10 × 12.5
22
10 × 16
22
10 × 20
33
10 × 20
47
12.5 × 20
47
12.5 × 25
68
12.5 × 25
68
16 × 20
100
16 × 25
150
18 × 31.5
220
18 × 35
270
20 × 35
330
22 × 35
395
273
186
124
85
56
40
27
18
8.4
8.4
5.6
4.5
4.0
3.3
2.7
1.8
1.2
0.84
0.67
0.56
296
205
139
93
63
42
30
21
14
6.3
6.3
4.2
3.4
3.0
2.5
2.1
1.4
0.92
0.63
0.50
0.42
158
109
74
50
34
22
16
11
7.4
3.4
3.4
2.2
1.8
1.6
1.3
1.1
0.74
0.49
0.34
0.27
0.22
15
18
22
30
33
40
55
78
95
155
170
205
270
290
350
365
475
640
770
910
1060
B43821A2474M***
B43821A2684M***
B43821A2105M***
B43821A2155M***
B43821A2225M***
B43821A2335M***
B43821A2475M***
B43821A2685M***
B43821B2106M***
B43821B2226M***
B43821A2226M***
B43821B2336M***
B43821B2476M***
B43821A2476M***
B43821B2686M***
B43821A2686M***
B43821A2107M***
B43821A2157M***
B43821A2227M***
B43821A2277M***
B43821A2337M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ∅ ≥ 10 mm)
002 = for cut leads, bulk (for ∅ ≥ 10 mm)
003 = for crimped leads, blister (for ∅ ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for ∅ 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 36
B43821
Standard series 85 °C
Technical data and ordering codes B43821
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
ESRmax
120 Hz
20 °C
Ω
ESRmax
10 kHz
20 °C
Ω
Zmax
100 kHz
20 °C
Ω
VR = 250 V DC
0.47
6.3 × 11
0.68
6.3 × 11
1
6.3 × 11
1.5
6.3 × 11
2.2
6.3 × 11
3.3
8 × 11.5
4.7
8 × 11.5
6.8
10 × 12.5
10
10 × 12.5
10
10 × 16
22
10 × 20
33
12.5 × 20
47
12.5 × 25
47
16 × 20
68
16 × 25
100
16 × 31.5
150
18 × 40
220
18 × 40
270
22 × 35
330
22 × 40
395
273
186
124
85
56
40
27
23
18
8.4
5.6
4.3
4.0
2.7
1.8
1.2
0.84
0.67
0.56
296
205
139
93
63
42
30
21
17
14
6.3
4.2
3.2
3.0
2.1
1.4
0.92
0.63
0.50
0.42
158
109
74
50
34
22
16
11
9.0
7.4
3.4
2.2
1.7
1.6
1.1
0.74
0.49
0.34
0.27
0.22
IAC,R
120 Hz
85 °C
mA
15
18
22
30
33
50
55
78
95
105
170
230
290
300
380
520
615
680
810
940
Ordering code
(composition see below)
B43821F2474M***
B43821F2684M***
B43821F2105M***
B43821F2155M***
B43821F2225M***
B43821F2335M***
B43821K2475M***
B43821F2685M***
B43821K2106M***
B43821F2106M***
B43821F2226M***
B43821K2336M***
B43821K2476M***
B43821F2476M***
B43821F2686M***
B43821K2107M***
B43821F2157M***
B43821F2227M***
B43821F2277M***
B43821F2337M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ∅ ≥ 10 mm)
002 = for cut leads, bulk (for ∅ ≥ 10 mm)
003 = for crimped leads, blister (for ∅ ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for ∅ 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 36
B43821
Standard series 85 °C
Technical data and ordering codes B43821
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 350 V DC
0.47
6.3 × 11
0.68
6.3 × 11
1
6.3 × 11
1.5
8 × 11.5
2.2
8 × 11.5
3.3
10 × 12.5
4.7
10 × 12.5
6.8
10 × 16
10
10 × 20
22
12.5 × 25
33
12.5 × 25
47
16 × 25
68
18 × 31.5
100
18 × 35
100
20 × 30
150
20 × 40
VR = 400 V DC
2.2
10 × 12.5
3.3
10 × 12.5
4.7
10 × 16
6.8
10 × 16
10
10 × 20
22
12.5 × 25
33
16 × 20
47
16 × 25
68
18 × 31.5
100
18 × 40
100
20 × 35
150
20 × 40
ESRmax
120 Hz
20 °C
Ω
ESRmax
10 kHz
20 °C
Ω
Zmax
100 kHz
20 °C
Ω
IAC,R
120 Hz
85 °C
mA
Ordering code
(composition see below)
395
273
186
124
85
56
40
27
18
8.4
5.6
4.0
2.7
2.3
1.8
1.2
296
205
139
93
63
42
30
21
14
6.3
4.2
3.0
2.1
1.7
1.4
0.92
158
109
74
50
34
22
16
11
7.4
3.4
2.2
1.6
1.1
0.90
0.74
0.49
15
18
22
32
38
55
65
85
115
200
240
300
420
520
530
700
B43821A4474M***
B43821A4684M***
B43821A4105M***
B43821A4155M***
B43821A4225M***
B43821A4335M***
B43821A4475M***
B43821A4685M***
B43821A4106M***
B43821A4226M***
B43821F4336M***
B43821F4476M***
B43821A4686M***
B43821F4107M***
B43821A4107M***
B43821A4157M***
85
56
40
27
18
8.4
5.6
4.0
2.8
1.9
1.8
1.2
63
42
30
21
14
6.3
4.2
3.0
2.1
1.4
1.4
0.92
34
22
16
11
7.4
3.4
2.2
1.6
1.1
0.74
0.74
0.49
45
55
70
85
115
200
240
280
420
450
460
600
B43821A9225M***
B43821A9335M***
B43821A9475M***
B43821A9685M***
B43821A9106M***
B43821F9226M***
B43821F9336M***
B43821F9476M***
B43821A9686M***
B43821F9107M***
B43821A9107M***
B43821A9157M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ∅ ≥ 10 mm)
002 = for cut leads, bulk (for ∅ ≥ 10 mm)
003 = for crimped leads, blister (for ∅ ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for ∅ 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 36
B43821
Standard series 85 °C
Technical data and ordering codes B43821
CR
120 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 450 V DC
2.2
10 × 12.5
3.3
10 × 16
4.7
10 × 16
6.8
10 × 20
10
10 × 20
22
12.5 × 25
22
16 × 25
33
16 × 25
33
16 × 31.5
47
16 × 31.5
47
18 × 31.5
68
18 × 35
100
20 × 40
ESRmax
120 Hz
20 °C
Ω
ESRmax
10 kHz
20 °C
Ω
Zmax
100 kHz
20 °C
Ω
IAC,R
120 Hz
85 °C
mA
85
56
40
27
26
14
8.4
7.6
5.6
4.8
4.0
2.7
1.8
63
42
30
21
19
10
6.3
5.7
4.2
3.6
3.0
2.1
1.4
34
22
16
11
10
5.4
3.4
3.0
2.2
1.9
1.6
1.1
0.74
35
45
50
75
80
140
165
180
190
220
265
275
295
Ordering code
(composition see below)
B43821A5225M***
B43821A5335M***
B43821F5475M***
B43821A5685M***
B43821F5106M***
B43821F5226M***
B43821A5226M***
B43821F5336M***
B43821A5336M***
B43821F5476M***
B43821A5476M***
B43821A5686M***
B43821A5107M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ∅ ≥ 10 mm)
002 = for cut leads, bulk (for ∅ ≥ 10 mm)
003 = for crimped leads, blister (for ∅ ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for ∅ 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 36
B41821, B43821
Standard series 85 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
VR = 6.3 ... 100 V DC
VR = 160 ... 450 V DC
1)
Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 36
B41821, B43821
Standard series 85 °C
Frequency factor of permissible ripple
current IAC versus frequency f
VR ≤ 100 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
Frequency factor of permissible ripple
current IAC versus frequency f
VR ≥ 160 V DC
Page 20 of 36
B41821, B43821
Standard series 85 °C
Taping, packing and lead configurations
Taping
Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows:
Lead spacing F = 2.5 mm (∅ d = 5 … 6.3 mm)
Lead spacing F = 3.5 mm (∅ d = 8 mm)
Lead spacing F = 5.0 mm (∅ d = 5 … 12.5 mm)
Lead spacing F = 7.5 mm (∅ d = 16 ... 18 mm).
Lead spacing 2.5 mm (∅ d = 5 ... 6.3 mm)
Last 3 digits of ordering code: 007
Dimensions in mm
∅d
5
F
H
W
W0
W1
W2
H0
P
P0
P1
I1
t
∆h
D0
2.5 18.5 18.0 5.5 9.0 1.5 16.0 12.7 12.7 5.1 1.0 0.7 1.0 4.0
6.3
Toler- +0.8
±0.75 ±0.5 min. ±0.5 max. ±0.5 ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2
ance 02
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 36
B41821, B43821
Standard series 85 °C
Lead spacing 3.5 mm (∅ d = 8 mm)
Last 3 digits of ordering code: 006
Dimensions in mm
∅d
8
Tolerance
F
H
W
W0
W1
W2
P
P0
P1
I1
t
∆h
3.5
18.5
18.0
12.5
9.0
1.5
12.7
12.7
4.6
1.0
0.7
1.0
+0.8
02
1.0
±0.5
min.
±0.5
max. ±1.0
±0.2
±0.5
max. ±0.2
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 36
D0
4.0
max. ±0.2
B41821, B43821
Standard series 85 °C
Lead spacing 5.0 mm (∅ d = 5 ... 8 mm)
Last 3 digits of ordering code: 008
Lead spacing 5.0 mm (∅ d = 10 ... 12.5 mm)
Last 3 digits of ordering code: 008
Dimensions in mm
∅d
5
6.3
F
H
W
W0
W1
W2
H0
P
P0
P1
I1
t
∆h
D0
5.0
18.5
18.0 5.5
9.0
1.5
16.0
12.7
12.7
3.85
1.0
0.7
1.0
4.0
16.0
12.7
12.7
3.85
18.0 12.5 9.0
1.5
12.7
12.7
3.85
1.0
0.7
1.0
4.0
15.0
15.0
5.0
±1.0
±0.2
±0.5
8
10
20.0
5.0
12.5
Toler- +0.8
ance 02
19.0
19.0
±0.75 ±0.5 min. ±0.5 max. ±0.5
Please read Cautions and warnings and
Important notes at the end of this document.
Page 23 of 36
max. ±0.2 max. ±0.2
B41821, B43821
Standard series 85 °C
Lead spacing 7.5 mm (∅ d = 16 ...18 mm)
Last 3 digits of ordering code: 009
Dimensions in mm
∅d
16
F
H
W
7.5 18.5 18.0
18 *)
Toler0.5
±0.8
±0.5
ance
+0.75
W0
W1
W2
P
P0
P1
I1
t
∆P
∆h
D0
12.5
9.0
1.5
30.0
15.0
3.75
1.0
0.7
0
0
4.0
min.
±0.5
max. ±1.0
±0.2
±0.5
max. ±0.2 ±1.0 ±1.0 ±0.2
*) Available only for case dimensions 18 × 20, 18 × 25 and 18 × 31.5 mm
Please read Cautions and warnings and
Important notes at the end of this document.
Page 24 of 36
B41821, B43821
Standard series 85 °C
Packing units and box dimensions
Ammo pack
Please read Cautions and warnings and
Important notes at the end of this document.
Case size
d×l
mm
Dimensions (mm)
Amax
Bmax
Cmax
5 × 11
345
55
240
2000
6.3 × 11
345
55
290
2000
8 × 11.5
345
55
240
1000
10 × 12.5
345
55
280
750
10 × 16
345
60
200
500
10 × 20
345
60
200
500
12.5 × 20
345
65
280
500
12.5 × 25
345
65
280
500
12.5 × 25
345
65
280
500
12.5 × 30
345
65
275
500
16 × 20
315
65
275
300
16 × 25
315
65
275
300
16 × 31.5
315
65
275
300
18 × 20
315
65
275
250
18 × 25
315
65
275
250
18 × 31.5
315
65
275
250
Page 25 of 36
Packing
units
pcs.
B41821, B43821
Standard series 85 °C
Kinked or cut leads
Single-ended capacitors are available with kinked or cut leads. Other lead configurations also
available upon request.
Kinked leads
Last 3 digits of ordering code: 001
With stand-off rubber seal
Case size
d × l (mm)
With flat rubber seal
Please read Cautions and warnings and
Important notes at the end of this document.
Page 26 of 36
Dimensions (mm)
a ±0.5
10 × 20
5.0
12.5 × 20
5.0
12.5 × 25
5.0
12.5 × 30
5.0
12.5 × 35
5.0
12.5 × 40
5.0
16 × 20
7.5
16 × 25
7.5
16 × 31.5
7.5
18 × 20
7.5
18 × 25
7.5
18 × 31.5
7.5
18 × 35
7.5
18 × 40
7.5
20 × 20
10.0
20 × 25
10.0
20 × 40
10.0
22 × 30
10.0
22 × 35
10.0
22 × 40
10.0
B41821, B43821
Standard series 85 °C
Cut leads
Last 3 digits of ordering code: 002
With stand-off rubber seal
Case size
d × l (mm)
With flat rubber seal
Please read Cautions and warnings and
Important notes at the end of this document.
Page 27 of 36
Dimensions (mm)
a ±0.5
10 × 12.5
5.0
10 × 16
5.0
10 × 20
5.0
12.5 × 20
5.0
12.5 × 25
5.0
12.5 × 30
5.0
12.5 × 35
5.0
12.5 × 40
5.0
16 × 20
7.5
16 × 25
7.5
16 × 31.5
7.5
18 × 20
7.5
18 × 25
7.5
18 × 31.5
7.5
18 × 35
7.5
18 × 40
7.5
20 × 20
10.0
20 × 25
10.0
20 × 40
10.0
B41821, B43821
Standard series 85 °C
PAPR leads (Protection Against Polarity Reversal)
These lead configurations ensure correct placement of the capacitor on the PCB with regard to
polarity. PAPR leads are available for diameters from 10 mm up to 20 mm.
There are three configurations available: Crimped leads, J leads, bent 90° leads
Crimped leads
Last 3 digits of ordering code: 003
With stand-off rubber seal
With flat rubber seal
Suggestion for PCB hole diameter
Case size
d × l (mm)
Dimensions (mm)
B ±0.2
C ±0.5
D ±0.1
E ±0.1
16 × 20
1.5
3.0
1.3
0.3
7.5
0.8 ±0.05
16 × 25
1.5
3.0
1.3
0.3
7.5
0.8 ±0.05
16 × 31.5
1.5
3.0
1.3
0.3
7.5
0.8 ±0.05
18 × 20
1.5
3.0
1.3
0.3
7.5
0.8 ±0.1
18 × 25
1.5
3.0
1.3
0.3
7.5
0.8 ±0.1
18 × 31.5
1.5
3.0
1.3
0.3
7.5
0.8 ±0.1
18 × 35
1.5
3.0
1.3
0.3
7.5
0.8 ±0.1
18 × 40
1.5
3.0
1.3
0.3
7.5
0.8 ±0.1
20 × 20
1.5
3.0
1.6
0.3
10.0
1.0 ±0.1
20 × 25
1.5
3.0
1.6
0.3
10.0
1.0 ±0.1
20 × 40
1.5
3.0
1.6
0.3
10.0
1.0 ±0.1
Please read Cautions and warnings and
Important notes at the end of this document.
Page 28 of 36
a ±0.5
∅b
B41821, B43821
Standard series 85 °C
J leads
Last 3 digits of ordering code: 004
Suggestion for PCB hole diameter
Case size
d × l (mm)
Dimensions (mm)
C ±0.5
E ±0.5
J ±0.2
10 × 12.5
3.2
0.7
1.2
5.0
0.6 ±0.05
10 × 16
3.2
0.7
1.2
5.0
0.6 ±0.05
10 × 20
3.2
0.7
1.2
5.0
0.6 ±0.05
12.5 × 20
3.2
0.7
1.2
5.0
0.6 ±0.05
12.5 × 25
3.2
0.7
1.2
5.0
0.6 ±0.05
16 × 20
3.5
0.7
1.6
7.5
0.8 ±0.05
16 × 25
3.5
0.7
1.6
7.5
0.8 ±0.05
16 × 31.5
3.5
0.7
1.6
7.5
0.8 ±0.05
18 × 20
3.5
0.7
1.6
7.5
0.8 ±0.1
18 × 25
3.5
0.7
1.6
7.5
0.8 ±0.1
18 × 31.5
3.5
0.7
1.6
7.5
0.8 ±0.1
18 × 35
3.5
0.7
1.6
7.5
0.8 ±0.1
Please read Cautions and warnings and
Important notes at the end of this document.
Page 29 of 36
a ±0.5
∅b
B41821, B43821
Standard series 85 °C
Bent 90° leads for horizontal mounting pinning
Last 3 digits of ordering code: 012
Case size
d × l (mm)
Dimensions (mm)
C ±0.5
E ±0.5
F ±0.5
a ±0.5
∅b
16 × 20
4.0
4.0
12.0
7.5
0.8 ±0.05
16 × 25
4.0
4.0
12.0
7.5
0.8 ±0.05
16 × 31.5
4.0
4.0
12.0
7.5
0.8 ±0.05
18 × 20
4.0
4.0
13.0
7.5
0.8 ±0.1
18 × 25
4.0
4.0
13.0
7.5
0.8 ±0.1
18 × 31.5
4.0
4.0
13.0
7.5
0.8 ±0.1
18 × 35
4.0
4.0
13.0
7.5
0.8 ±0.1
18 × 40
4.0
4.0
13.0
7.5
0.8 ±0.1
Bent leads for diameter 12.5 mm available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 30 of 36
B41821, B43821
Standard series 85 °C
Overview of packing units and code numbers for case sizes 5 × 11 ... 16 × 31.5
PAPR
Case size
d×l
Taped,
Ammo pack
mm
Standard,
bulk
pcs.
5 × 11
2000
6.3 × 11
2500
2000
8 × 11.5
1000
1000
10 × 12.5
1000
750
10 × 16
100
500
1000
10 × 20
500
500
500
500
12.5 × 20
350
500
350
350
12.5 × 25
250
500
500
500
12.5 × 30
200
500
175
175
12.5 × 35
175
-
175
175
12.5 × 40
175
-
175
175
16 × 20
250
300
200
200
16 × 25
250
300
200
16 × 31.5
200
300
The last three
digits of the
complete
ordering code
state the lead
configuration
000
Code
006
007
008
009
1)
pcs.
Kinked
leads,
bulk
pcs.
Cut
Crimped J leads
leads, leads
bulk
pcs.
pcs.
pcs.
2000
F (mm) d (mm)
3.5
2.5
5
7.5
1000
675
675
500
300
1)
225
1)
180
1)
150
1)
150
1)
200
200
120
200
200
200
120
250
250
344
344
120
001
002
003
004
012
8
5...6.3
5...12.5
16...18
Available upon request
Please read Cautions and warnings and
Important notes at the end of this document.
Bent 90°
leads,
blister
pcs.
Page 31 of 36
B41821, B43821
Standard series 85 °C
Overview of packing units and code numbers for case sizes 18 × 20 ... 25 × 40
PAPR
Case size
d×l
Taped,
Ammo pack
mm
Standard,
bulk
pcs.
pcs.
Kinked
leads,
bulk
pcs.
Cut
Crimped J leads
leads, leads
bulk
pcs.
pcs.
pcs.
Bent 90°
leads,
blister
pcs.
18 × 20
175
18 × 25
150
250
175
175
200
200
120
250
150
150
200
200
18 × 31.5
120
100
250
100
100
150
150
120
18 × 35
100
100
100
150
150
150
18 × 40
125
100
100
120
72
20 × 20
125
125
125
200
20 × 25
125
125
125
200
20 × 30
100
100
100
120
20 × 35
100
100
100
120
20 × 40
100
100
100
120
22 × 30
80
100
100
22 × 35
80
100
100
22 × 40
80
100
100
25 × 40
40
100
The last three
digits of the
complete
ordering code
state the lead
configuration
000
Code
007
008
009
001
002
Please read Cautions and warnings and
Important notes at the end of this document.
F (mm) d (mm)
2.5
5
7.5
4...6.3
6.3...12.5
16...18
Page 32 of 36
003
004
012
B41821, B43821
Standard series 85 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 33 of 36
B41821, B43821
Standard series 85 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Polarity
Make sure that polar capacitors are connected
with the right polarity.
Reverse voltage
Voltages polarity classes should be prevented by
connecting a diode.
Do not exceed the upper category temperatur.
Upper category
temperature
Maintenance
Mounting
position of screw
terminal capacitors
Mounting of
single-ended
capacitors
Robustness of
terminals
Soldering
Make periodic inspections of the capacitors.
Before the inspection, make sure that the power
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Do not mount the capacitor with the terminals
(safety vent) upside down.
Reference
Chapter "General
technical information"
1
"Basic construction of
aluminum electrolytic
capacitors"
3.1.6
"Reverse voltage"
7.2
"Maximum permissible
operating temperature"
10
"Maintenance"
11.1.
"Mounting positions of
capacitors with screw
terminals"
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
The following maximum tightening torques must
11.3
not be exceeded when connecting screw
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Do not exceed the specified time or temperature 11.5
limits during soldering.
"Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 34 of 36
B41821, B43821
Standard series 85 °C
Topic
Soldering,
cleaning agents
Passive
flammability
Active
flammability
Safety information
Reference
Chapter "General
technical information"
Do not allow halogenated hydrocarbons to come 11.6
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Avoid external energy, such as fire or electricity.
8.1
"Passive flammability"
Avoid overload of the capacitors.
8.2
"Active flammability"
Breakdown strength Do not damage the insulating sleeve, especially
of insulating
when ring clips are used for mounting.
sleeves
Please read Cautions and warnings and
Important notes at the end of this document.
Page 35 of 36
Reference
Chapter "Capacitors
with screw terminals"
"Screw terminals accessories"
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out
in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications
in which the malfunction or failure of a passive electronic component could endanger human
life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured
by means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, EPCOS-JONES, BAOKE, Alu-X, CeraDiode, CSSP, MLSC,
PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K,
UltraCap, WindCap are trademarks registered or pending in Europe and in other countries.
Further information will be found on the Internet at www.epcos.com/trademarks.
Page 36 of 36
Similar pages