VISHAY VJ1206Y472KXAMT

VJ Commercial Series
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
FEATURES
• C0G (NP0) and X7R/X5R dielectrics offered
• C0G (NP0) is an ultra-stable dielectric
offering a very low Temperature Coefficient
of Capacitance (TCC)
• C0G (NP0) offers low dissipation
• Excellent aging characteristics
• Ideal for decoupling and filtering (X7R)
• Ideal for surge suppression and high voltage applications
• Wide range of case sizes, voltage ratings and capacitance
values
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
•
•
•
•
Timing and tuning circuits
Sensor and scanner applications
Decoupling and filtering
Surge suppression
ELECTRICAL SPECIFICATIONS
C0G (NP0) DIELECTRIC
X5R, X7R DIELECTRIC
GENERAL SPECIFICATION
GENERAL SPECIFICATION
Note
Electrical characteristics at + 25 °C unless otherwise specified
Note
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 150 °C
(above + 125 °C changed characteristics)
Operating Temperature: - 55 °C to + 150 °C
(X5R above + 85 °C changed characteristics)
(X7R above + 125 °C changed characteristics)
Capacitance Range: 1 pF to 56 nF
Voltage Range: 25 VDC to 1000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values  1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E
Applied test voltages
 200 VDC-rated:
250 % of rated voltage
500 VDC-rated:
200 % of rated voltage
150 % of rated voltage
630 VDC,1000 VDC-rated:
Revision: 15-May-12
Capacitance Range: 120 pF to 6.8 μF
Voltage Range: 10 VDC to 1000 VDC
Temperature Coefficient of Capacitance (TCC):
X5R: ± 15 % from - 55 °C to + 85 °C, with 0 VDC applied
X7R: ± 15 % from - 55 °C to + 125 °C, with 0 VDC applied
Dissipation Factor (DF):
10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz
16 V/25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz
> 25 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E.
Applied test voltages
 250 VDC-rated:
250 % of rated voltage
min. 150 % of rated voltage
500 VDC-rated:
630 VDC, 1000 VDC-rated:
150 % of rated voltage
Document Number: 45199
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CASE
MAXIMUM VOLTAGE
(V)
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
0805
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
3640
100
200
500
630
630
1000
1000
500
1000
1000
10
100
200
250
630
630
1000
1000
1000
500
1000
500
C0G (NP0)
X5R
X7R
CAPACITANCE
MINIMUM
1.0 pF
1.0 pF
1.0 pF
1.0 pF
56 pF
18 pF
39 pF
100 pF
270 pF
270 pF
560 nF
120 pF
330 pF
330 pF
330 pF
390 pF
470 pF
1.0 nF
10 nF
15 nF
33 nF
27 nF
MAXIMUM
220 pF
1.0 nF
4.7 nF
10 nF
22 nF
10 nF
22 nF
39 nF
47 nF
56 nF
1.0 μF
47 nF
150 nF
470 nF
1.0 μF
1.0 μF
270 nF
1.0 μF
2.7 μF
2.2 μF
4.7 μF
6.8 μF
Note
• Detail ratings see selection chart
ORDERING INFORMATION
VJ0805 (3)
Y
102
K
X
A
A
T
### (2)
CASE
CODE
DIELECTRIC
CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE
TERMINATION
DC
VOLTAGE
RATING (1)
MARKING
PACKAGING
PROCESS
CODE
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
3640
A = C0G
(NP0)
Y = X7R
G = X5R (4)
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier.
Examples
1R8 = 1.8 pF
102 = 1000 pF
Q = 10 V
J = 16 V
X = 25 V
A = 50 V
B = 100 V
C = 200 V
P = 250 V
E = 500 V
L = 630 V
G = 1000 V
A=
Unmarked
M = Marked
Note:
Marking is
only
available for
0805 and
1206 with
termination
code “X”
X = Ni barrier
B = ± 0.10 pF
C = ± 0.25 pF 100 % tin plated
matte finish
D = ± 0.5 pF
F, E = AgPd
F=±1%
B = Polymer
G=±2%
100 % tin plated
J=±5%
matte finish (5)
K = ± 10 %
M = ± 20 %
Note:
C0G (NP0):
B, C, D < 10 pF
F, G, J, K 10 pF
X7R/X5R:
J, K, M
C = 7" reel/paper tape
T = 7" reel/plastic tape
P = 11 1/4"/13" reel/
paper tape
R = 11 1/4"/13" reel/
plastic tape
O = 7" reel/flamed
paper tape
I = 11 1/4"/13" reel/flamed
paper tape
Note:
“I” and “O” are used for
“F”, “E” termination
size 0402/0603/0805
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
(2) Process code may be added with up to three digits, used to control non-standard products and/or special requirements
(3) Case size designator may be replaced by four digit drawing number used to control non-standard products and/or special requirements
(4) Selected values for X5R, see selection chart
(5) Selected values available, contact [email protected] for list of released ratings
(6) Termination code “E” is for conductive epoxy assembly
Revision: 15-May-12
Document Number: 45199
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
CASE CODE
STYLE
LENGTH
(L)
WIDTH
(W)
TERMINATION
(P)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
0402
VJ0402
0.040 + 0.004/- 0.002
(1.00 + 0.10/- 0.05)
0.020 + 0.004/- 0.002
(0.50 + 0.10/- 0.05)
0.024
(0.60)
0.004
(0.10)
0.016
(0.41)
0603
VJ0603
0.063 ± 0.006
(1.60 ± 0.15)
0.031 ± 0.006
(0.80 ± 0.15)
0.036
(0.92)
0.012
(0.30)
0.018
(0.46)
0805
VJ0805
0.079 ± 0.008
(2.00 ± 0.20)
0.049 ± 0.008
(1.25 ± 0.20)
0.057
(1.45)
0.010
(0.25)
0.028
(0.71)
1206
VJ1206
0.126 ± 0.008
(3.20 ± 0.20)
0.063 ± 0.008
(1.60 ± 0.20)
0.067
(1.70)
0.010
(0.25)
0.028
(0.71)
1210
VJ1210
0.126 ± 0.008
(3.20 ± 0.20)
0.098 ± 0.008
(2.50 ± 0.20)
0.067
(1.70)
0.010
(0.25)
0.028
(0.71)
1808
VJ1808
0.180 ± 0.012
(4.57 ± 0.30)
0.080 ± 0.010
(2.03 ± 0.25)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
1812
VJ1812
0.177 ± 0.012
(4.50 ± 0.30)
0.126 ± 0.008
(3.20 ± 0.20)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
1825
VJ1825
0.177 ± 0.012
(4.50 ± 0.30)
0.252 ± 0.010
(6.40 ± 0.25)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
2220
VJ2220
0.220 ± 0.010
(5.59 ± 0.25)
0.200 ± 0.010
(5.08 ± 0.25)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
2225
VJ2225
0.220 ± 0.010
(5.59 ± 0.25)
0.250 ± 0.010
(6.35 ± 0.25)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
3640
VJ3640
0.360 ± 0.015
(9.14 ± 0.38)
0.400 ± 0.015
(10.20 ± 0.38)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
Note
• Polymer (B-termination) have increased dimensions:
Length 0.006"(0.15 mm)
Revision: 15-May-12
Document Number: 45199
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
C0G (NP0)
STYLE
VJ0402
VJ0603
VJ0805
VJ1206 (1)
CASE CODE
0402
0603
0805
1206
VOLTAGE (VDC)
25 50 100 50 100 200 50 100 200 500 50 100 200 500
VOLTAGE CODE
X
A
B
A
B
C
A
B
C
E
A
B
C
E
CAP. CODE CAP.
1R0
1.0 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
1R2
1.2 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
1R5
1.5 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
1R8
1.8 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
2R2
2.2 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
2R7
2.7 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
3R3
3.3 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
3R9
3.9 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
4R7
4.7 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
5R6
5.6 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
6R8
6.8 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
8R2
8.2 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
100
10 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
120
12 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
150
15 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
180
18 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
220
22 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
270
27 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
330
33 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
390
39 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
470
47 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
560
56 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
680
68 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
820
82 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
101
100 pF •• •• ••
•• •• ••
••
••
••
••
•
•
•
•
121
120 pF •• •• ••
•• •• ••
••
••
••
••
•
•
•
•
151
150 pF •• ••
•• •• ••
••
••
••
••
•
•
•
•
181
180 pF •• ••
•• ••
•
••
••
••
••
•
•
•
•
221
220 pF •• ••
•• ••
•
••
••
••
•
•
•
•
•
271
270 pF
•• ••
•
••
••
••
•
•
•
•
•
331
330 pF
•• ••
••
••
••
•
•
•
•
•
391
390 pF
•• ••
••
••
••
•
•
•
•
•
471
470 pF
••
••
••
•
•
•
•
•
•
561
560 pF
••
••
••
•
•
•
•
•
681
680 pF
••
••
••
•
•
•
•
•
821
820 pF
••
••
••
•
•
•
•
•
102
1.0 nF
••
••
••
•
•
•
•
•
122
1.2 nF
••
•
•
•
•
152
1.5 nF
••
•
•
•
•
182
1.8 nF
•
•
•
•
222
2.2 nF
•
•
•
•
272
2.7 nF
•
•
•
•
332
3.3 nF
•
•
•
•
392
3.9 nF
•
•
•
472
4.7 nF
•
•
•
562
5.6 nF
•
•
682
6.8 nF
•
•
822
8.2 nF
•
•
103
10 nF
•
•
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
Notes
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
•• Paper tape • Plastic tape
Revision: 15-May-12
630
L
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
•
•
•
•
•
•
•
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1210 (1)
1210
100 200 500 630
B
C
E
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45199
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
C0G (NP0)
VJ1812 (1)
STYLE
VJ1808 (1)
CASE CODE
1808
1812
50
100
200
500
1000 50
100
200
500
VOLTAGE (VDC)
VOLTAGE CODE
A
B
C
E
G
A
B
C
E
CAP. CODE
CAP.
1R0
1.0 pF
1R2
1.2 pF
1R5
1.5 pF
1R8
1.8 pF
2R2
2.2 pF
2R7
2.7 pF
3R3
3.3 pF
3R9
3.9 pF
4R7
4.7 pF
5R6
5.6 pF
6R8
6.8 pF
8R2
8.2 pF
100
10 pF
120
12 pF
150
15 pF
180
18 pF
•
220
22 pF
•
•
270
27 pF
•
•
330
33 pF
•
•
390
39 pF
•
•
•
•
•
•
470
47 pF
•
•
•
•
•
•
560
56 pF
•
•
•
•
•
•
680
68 pF
•
•
•
•
•
•
820
82 pF
•
•
•
•
•
•
101
100 pF
•
•
•
•
•
•
121
120 pF
•
•
•
•
•
•
•
151
150 pF
•
•
•
•
•
•
•
181
180 pF
•
•
•
•
•
•
•
221
220 pF
•
•
•
•
•
•
•
•
•
271
270 pF
•
•
•
•
•
•
•
•
•
331
330 pF
•
•
•
•
•
•
•
•
•
391
390 pF
•
•
•
•
•
•
•
•
•
471
470 pF
•
•
•
•
•
•
•
•
•
561
560 pF
•
•
•
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
•
•
•
821
820 pF
•
•
•
•
•
•
•
•
•
102
1.0 nF
•
•
•
•
•
•
•
•
•
122
1.2 nF
•
•
•
•
•
•
•
•
152
1.5 nF
•
•
•
•
•
•
•
•
182
1.8 nF
•
•
•
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
•
•
272
2.7 nF
•
•
•
•
•
•
•
332
3.3 nF
•
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
•
•
472
4.7 nF
•
•
•
•
•
•
•
562
5.6 nF
•
•
•
•
•
•
682
6.8 nF
•
•
•
•
•
•
822
8.2 nF
•
•
•
•
•
103
10 nF
•
•
•
•
123
12 nF
•
•
•
153
15 nF
•
•
183
18 nF
•
223
22 nF
•
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
Notes
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
• Plastic tape
Revision: 15-May-12
1000
G
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1825 (1)
1825
100
200
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45199
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
C0G (NP0)
STYLE
VJ2220 (1)
CASE CODE
2220
50
100
200
500
630
1000
50
VOLTAGE (VDC)
VOLTAGE CODE
A
B
C
E
L
G
A
CAP. CODE
CAP.
1R0
1.0 pF
1R2
1.2 pF
1R5
1.5 pF
1R8
1.8 pF
2R2
2.2 pF
2R7
2.7 pF
3R3
3.3 pF
3R9
3.9 pF
4R7
4.7 pF
5R6
5.6 pF
6R8
6.8 pF
8R2
8.2 pF
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
•
•
•
•
•
•
331
330 pF
•
•
•
•
•
•
391
390 pF
•
•
•
•
•
•
471
470 pF
•
•
•
•
•
•
561
560 pF
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
821
820 pF
•
•
•
•
•
•
102
1.0 nF
•
•
•
•
•
•
122
1.2 nF
•
•
•
•
•
•
•
152
1.5 nF
•
•
•
•
•
•
•
182
1.8 nF
•
•
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
•
•
272
2.7 nF
•
•
•
•
•
•
•
332
3.3 nF
•
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
•
•
472
4.7 nF
•
•
•
•
•
•
•
562
5.6 nF
•
•
•
•
•
•
682
6.8 nF
•
•
•
•
822
8.2 nF
•
•
•
•
103
10 nF
•
•
•
•
123
12 nF
•
•
•
•
153
15 nF
•
•
•
•
183
18 nF
•
•
•
223
22 nF
•
•
•
273
27 nF
•
•
•
333
33 nF
•
•
•
393
39 nF
•
•
473
47 nF
•
•
563
56 nF
•
Notes
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
• Plastic tape
Revision: 15-May-12
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ2225 (1)
2225
200
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1000
G
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45199
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R/X5R (1)
STYLE
VJ0402
VJ0603
CASE CODE
0402
0603
16
25
50
100
16
25
50
100
200
VOLTAGE (VDC)
VOLTAGE CODE
J
X
A
B
J
X
A
B
C
CAP. CODE
CAP.
121
120 pF
••
••
••
••
151
150 pF
••
••
••
••
181
180 pF
••
••
••
••
221
220 pF
••
••
••
••
271
270 pF
••
••
••
••
331
330 pF
••
••
••
••
••
••
••
391
390 pF
••
••
••
••
••
••
••
••
••
471
470 pF
••
••
••
••
••
••
••
••
••
561
560 pF
••
••
••
••
••
••
••
••
••
681
680 pF
••
••
••
••
••
••
••
••
••
821
820 pF
••
••
••
••
••
••
••
••
••
102
1.0 nF
••
••
••
••
••
••
••
••
••
122
1.2 nF
••
••
••
••
••
••
••
••
••
152
1.5 nF
••
••
••
••
••
••
••
••
••
182
1.8 nF
••
••
••
••
••
••
••
••
••
222
2.2 nF
••
••
••
••
••
••
••
••
••
272
2.7 nF
••
••
••
••
••
••
••
••
••
332
3.3 nF
••
••
••
••
••
••
••
••
••
392
3.9 nF
••
••
••
••
••
••
••
••
••
472
4.7 nF
••
••
••
••
••
••
••
••
••
562
5.6 nF
••
••
••
••
••
••
••
682
6.8 nF
••
••
••
••
••
••
••
822
8.2 nF
••
••
••
••
••
••
••
103
10 nF
••
••
••
••
••
••
••
123
12 nF
••
••
••
••
••
••
153
15 nF
••
••
••
••
••
••
183
18 nF
••
••
••
••
••
••
223
22 nF
••
••
••
••
••
273
27 nF
••
••
••
••
••
333
33 nF
••
••
••
••
••
393
39 nF
••
••
••
••
••
473
47 nF
••
••
••
••
563
56 nF
••
••
••
683
68 nF
••
••
••
823
82 nF
••
••
••
104
100 nF
••
••
••
124
120 nF
••
154
150 nF
••
184
180 nF
224
220 nF
274
270 nF
334
330 nF
394
390 nF
474
470 nF
564
560 nF
684
680 nF
824
820 nF
105
1.0 μF
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
275
2.7 μF
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
Notes
(1) X5R (- 55 °C to + 85 °C TCC: ± 15 %) for all 0805/10 V ratings. All other values X7R.
•• Paper tape • Plastic tape
Revision: 15-May-12
10
Q
16
J
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
•
VJ0805
0805
25
50
100
X
A
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
•
200
C
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
250
P
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
• X5R
• X5R
• X5R
• X5R
Document Number: 45199
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
STYLE
VJ1206 (1)
CASE CODE
1206 (1)
VOLTAGE (VDC)
16
25
50
100 200 250 500 630
16
25
VOLTAGE CODE
J
X
A
B
C
P
E
L
J
X
CAP. CODE
CAP.
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
••
••
391
390 pF
••
••
471
470 pF
••
••
••
••
••
••
561
560 pF
••
••
••
••
••
••
681
680 pF
••
••
••
••
••
••
821
820 pF
••
••
••
••
••
••
102
1.0 nF
••
••
••
••
••
••
••
122
1.2 nF
••
••
••
••
••
••
••
152
1.5 nF
••
••
••
••
••
••
••
182
1.8 nF
••
••
••
••
••
••
••
222
2.2 nF
••
••
••
••
••
••
••
272
2.7 nF
••
••
••
••
••
••
••
332
3.3 nF
••
••
••
••
••
••
••
392
3.9 nF
••
••
••
••
••
••
••
472
4.7 nF
••
••
••
••
••
••
••
562
5.6 nF
••
••
••
••
••
•
•
682
6.8 nF
••
••
••
••
••
•
•
822
8.2 nF
••
••
••
••
••
•
•
103
10 nF
••
••
••
••
••
•
•
•
•
•
123
12 nF
••
••
••
••
••
•
•
•
•
•
153
15 nF
••
••
••
••
••
•
•
•
•
•
183
18 nF
••
••
••
••
••
•
•
•
•
•
223
22 nF
••
••
••
••
••
•
•
•
273
27 nF
••
••
••
••
••
•
•
•
333
33 nF
••
••
••
••
••
•
•
•
393
39 nF
••
••
••
••
•
•
•
•
473
47 nF
••
••
••
••
•
•
•
•
563
56 nF
••
••
••
••
•
•
•
•
683
68 nF
••
••
••
••
•
•
•
•
823
82 nF
••
••
•
•
•
•
•
•
104
100 nF
••
••
•
•
•
•
•
•
124
120 nF
••
••
•
•
•
•
154
150 nF
••
••
•
•
•
•
184
180 nF
••
••
•
•
•
•
224
220 nF
•
•
•
•
•
•
274
270 nF
•
•
•
•
•
•
334
330 nF
•
•
•
•
•
394
390 nF
•
•
•
•
•
474
470 nF
•
•
•
•
•
564
560 nF
•
•
•
•
684
680 nF
•
•
•
•
824
820 nF
•
•
•
•
105
1.0 μF
•
•
•
•
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
275
2.7 μF
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
Notes
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
•• Paper tape • Plastic tape
Revision: 15-May-12
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1210 (1)
1210 (1)
100 200
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
250
P
•
500
E
630
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45199
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
STYLE
VJ1808 (1)
VJ1812 (1)
CASE CODE
1808
1812
VOLTAGE (VDC)
50 100 200 500 1000 25 50 100 200 250 500 630 1000
VOLTAGE CODE
A
B
C
E
G
X
A
B
C
P
E
L
G
CAP. CODE CAP.
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
•
561
560 pF
•
681
680 pF
•
821
820 pF
•
102
1.0 nF
•
•
•
•
•
122
1.2 nF
•
•
•
•
•
152
1.5 nF
•
•
•
•
•
182
1.8 nF
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
272
2.7 nF
•
•
•
•
•
332
3.3 nF
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
472
4.7 nF
•
•
•
•
•
•
562
5.6 nF
•
•
•
•
•
•
682
6.8 nF
•
•
•
•
•
•
822
8.2 nF
•
•
•
•
•
•
103
10 nF
•
•
•
•
•
•
•
•
•
123
12 nF
•
•
•
•
•
•
•
•
153
15 nF
•
•
•
•
•
•
•
•
183
18 nF
•
•
•
•
•
•
•
•
223
22 nF
•
•
•
•
•
•
•
•
•
•
•
273
27 nF
•
•
•
•
•
•
•
•
•
•
•
333
33 nF
•
•
•
•
•
•
•
•
•
393
39 nF
•
•
•
•
•
•
•
•
•
473
47 nF
•
•
•
•
•
•
•
•
•
563
56 nF
•
•
•
•
•
•
•
•
•
683
68 nF
•
•
•
•
•
•
•
•
•
823
82 nF
•
•
•
•
•
•
•
•
•
104
100 nF •
•
•
•
•
•
•
•
•
•
124
120 nF •
•
•
•
•
•
•
154
150 nF •
•
•
•
•
•
•
184
180 nF •
•
•
•
•
•
•
224
220 nF •
•
•
•
•
•
274
270 nF •
•
•
•
•
•
334
330 nF
•
•
•
•
•
394
390 nF
•
•
•
•
474
470 nF
•
•
•
•
564
560 nF
•
•
•
684
680 nF
•
•
•
824
820 nF
•
•
•
105
1.0 μF
•
•
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
275
2.7 μF
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
Notes
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
• Plastic tape
Revision: 15-May-12
25
X
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1825 (1)
1825
100 200 250 500
B
C
P
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1000
G
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45199
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
STYLE
VJ2220 (1)
VJ2225 (1)
CASE CODE
2220
2225
VOLTAGE (VDC)
50
100
200
500
25
50
100
200
500
VOLTAGE CODE
A
B
C
E
X
A
B
C
E
CAP. CODE
CAP.
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
153
15 nF
•
183
18 nF
•
223
22 nF
•
273
27 nF
•
333
33 nF
•
•
•
•
•
•
393
39 nF
•
•
•
•
•
•
473
47 nF
•
•
•
•
•
•
563
56 nF
•
•
•
•
•
•
683
68 nF
•
•
•
•
•
•
823
82 nF
•
•
•
•
•
•
104
100 nF
•
•
•
•
•
•
•
124
120 nF
•
•
•
•
•
•
•
154
150 nF
•
•
•
•
•
•
•
184
180 nF
•
•
•
•
•
•
•
224
220 nF
•
•
•
•
•
•
•
•
274
270 nF
•
•
•
•
•
•
•
•
334
330 nF
•
•
•
•
•
•
•
•
394
390 nF
•
•
•
•
•
•
•
474
470 nF
•
•
•
•
•
•
•
564
560 nF
•
•
•
•
•
•
•
684
680 nF
•
•
•
•
•
•
•
824
820 nF
•
•
•
•
•
•
•
105
1.0 μF
•
•
•
•
•
•
•
125
1.2 μF
•
•
•
•
•
•
155
1.5 μF
•
•
•
•
185
1.8 μF
•
•
•
•
225
2.2 μF
•
•
•
275
2.7 μF
•
•
335
3.3 μF
•
395
3.9 μF
•
475
4.7 μF
•
565
5.6 μF
685
6.8 μF
Notes
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
• Plastic tape
Revision: 15-May-12
1000
G
25
X
VJ3640 (1)
3640
50
100
200
A
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45199
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
INSULATION RESISTANCE VS. TEMPERATURE
10 000
1.5
INSULATION RESISTANCE
(ΩF)
% CAPACITANCE CHANGE
TEMPERATURE COEFFICIENT OF CAPACITANCE
2.0
1.0
1000
0.5
0.0
- 0.5
NP0
100
- 1.0
- 1.5
- 2.0
10
- 75 - 50 - 25
10
0 25 50 75 100 125 150 175
TEMPERATURE °C
150
0.2
% CAPACITANCE CHANGE
0.1
0.0
- 0.1
0.1
0.0
- 0.1
- 0.2
- 0.2
1
10
100
HOURS
1000
10 000
0
10
CHANGE OF CAPACITANCE WITH FREQUENCY
40
50
60
70
DC VOLTS APPLIED
80
90
100
DISSIPATION FACTOR VS. FREQUENCY
0.0005
0
-1
-2
Revision: 15-May-12
30
DISSIPATION FACTOR
1
1 kHz
20
0.001
2
% CAPACITANCE CHANGE
100
50
TEMPERATURE °C
VOLTAGE COEFFICIENT OF CAPACITANCE
AGING RATE
0.2
% CAPACITANCE CHANGE
25
10 kHz
100 kHz
FREQUENCY
1 MHz
0.00025
1 kHz
10 kHz
100 kHz
FREQUENCY
1 MHz
Document Number: 45199
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
X7R/X5R DIELECTRIC - TYPICAL PARAMETERS
INSULATION RESISTANCE VS. TEMPERATURE
TEMPERATURE COEFFICIENT OF CAPACITANCE
10 000
10
INSULATION RESISTANCE
(ΩF)
% CAPACITANCE CHANGE
15
X5R
5
0
1000
-5
X7R
- 10
- 15
- 20
- 25
100
10
- 30
- 75 - 50 - 25 0 20 50 75 100 125 150 175
TEMPERATURE °C
10
AGING RATE
DISSIPATION FACTOR VS. TEMPERATURE
1.0
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
% CAPACITANCE CHANGE
% DISSIPATION FACTOR
150
25
100
TEMPERATURE °C
X5R
X7R
0.0
- 1.0
- 2.0
- 3.0
- 4.0
- 75 - 50 - 25 0 25 50 75 100 125 150 175
TEMPERATURE °C
1
RATED VOLTAGE VS. TEMPERATURE
10
100
HOURS
1000
10 000
VOLTAGE COEFFICIENT OF CAPACITANCE
% CAPACITANCE CHANGE
5
% RATED VOLTAGE
200
150
X7R
100
50
0
-5
- 10
25 V
RATED
- 15
- 20
50 V
RATED
- 25
- 30
0
0
- 75 - 50 - 25 0 20 50 75 100 125 150 175 180
TEMPERATURE °C
DISSIPATION FACTOR VS. VOLTAGE
10 20
30 40 50 60 70 80
DC VOLTS APPLIED
90 100
DISSIPATION FACTOR VS. VOLTAGE
0.020
0.016
0.012
50 V
0.008
100 V
0.004
0
10 20 30 40 50 60 70 80 90 100
DC VOLTS APPLIED
Revision: 15-May-12
DISSIPATION FACTOR
0.020
DISSIPATION FACTOR
100 V
RATED
0.016
0.012
0.008
200 V
0.000
0
100
500 V/630 V
200 300 400 500
DC VOLTS APPLIED
600
700
Document Number: 45199
12
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
STANDARD PACKAGING QUANTITIES
(1)(2)(3)
7" REEL QUANTITIES
CASE CODE
TAPE SIZE
11 1/4" AND 13" REEL QUANTITIES
PAPER TAPE
PACKAGING CODE
“C”/“O”
PLASTIC TAPE
PACKAGING CODE
“T”
PAPER TAPE
PACKAGING CODE
“P”/“I”
PLASTIC TAPE
PACKAGING CODE
“R”
0402
8 mm
5000
n/a
10 000
n/a
0603 (4)
8 mm
4000
4000
10 000
10 000
0805 (4)
8 mm
3000
3000
10 000
10 000
1206 (4)
8 mm
3000
3000/2500
10 000
10 000/9000
1210 (4)
8 mm
n/a
3000/2500/2000
n/a
10 000/9000
1808
12 mm
n/a
2000
n/a
10 000
1812
12 mm
n/a
1000
n/a
4000
1825
12 mm
n/a
1000
n/a
4000
2220
12 mm
n/a
1000
n/a
4000
2225
12 mm
n/a
1000
n/a
4000
3640
16 mm
n/a
500
n/a
n/a
Notes
(1) Vishay Vitramon uses embossed plastic carrier tape
(2) REFERENCE: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(3) N/A = Not available
(4) Packaging “C”/”P”/”O”/”I” and “T”/”R” or lower quantities can depend from product thickness
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to + 40 °C ambient temperature and  70 % related humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a.Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the
like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 15-May-12
Document Number: 45199
13
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V i s h ay I n t e r t e c h n o l o g y, I n c .
RoHS Compliance Update
The RoHS compliance of the parts in this
datasheet is currently under review. For more
information, please contact your local Vishay sales
representative.
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000