EPCOS B39191-B5026-H510 Saw components low-loss filter 190.00 mhz Datasheet

SAW Components
SAW IF Filter
W-CDMA base station, Rx
Series/Type:
Ordering code:
B5026
B39191-B5026-H510
Date:
Version:
Jun 06, 2006
2.1
 EPCOS AG 2005. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
B5026
190.00 MHz
Low-Loss Filter
Data Sheet
Application
■ Low-loss IF filter for W-CDMA base station,
receive path (Rx)
■ Unbalanced or balanced operation possible
■ High near-by selectivity
■ Temperature stable
Features
7,62
1,0
mm3
Package size 13.3 x 6.5 x 1.6
Package code DCC12A
RoHS compatible
Approx. weight 0.4 g
Ceramic package for Surface Mount Technology (SMT)
■ Ni, gold-plated terminals
■ Electrostatic Sensitive Device (ESD)
■ Filter surface passivated
3
2,3
10
9
8
1,6
Input
Input ground
Output
Output ground
To be grounded
Case ground
Please read cautions and warnings and
important notes at the end of this document.
7
6
3,81
Pin configuration
10
1
5
6
3,8
2,4,7,9
5
bottom view
side view
top view
13,3
■
■
■
■
■
■
4
1,7
2
6,5
■
■
■
■
■
1
2
Jun 06, 2006
SAW Components
B5026
190.00 MHz
Low-Loss Filter
Data Sheet
Characteristics
Operating temperature range:
Terminating source impedance:
Terminating load impedance:
T =
ZS =
ZL =
-30 to +85 ˚C
50 Ω and matching network
50 Ω and matching network
min.
Nominal frequency
fN
—
typ.
@ 25˚C
190.0
Minimum insertion attenuation
(including matching network)
αmin
—
12.0
15.0
3.84
—
4.2
4.8
—
—
Passband width
αrel ≤ 1 dB B1dB
αrel ≤ 30 dB B30dB
max.
—
MHz
dB
MHz
MHz
Amplitude ripple (p-p)
fN ± 1.92 MHz
∆α
—
0.7
1.0
dB
Phase ripple (rms)
fN ± 1.92 MHz
∆ϕ
—
1.0
1.5
˚ rms
1688
1693
1698
ns
—
2.0
—
%
—
50
—
dB
32
37
40
38
42
45
—
—
—
dB
dB
dB
Absolute group delay
τ
mean value within fN ± 1.92 MHz at 25 ˚C 1)
Error vector magnitude
fN ± 1.92 MHz
EVM
Adjacent channel suppression
fN ± 3.08 MHz ... fN ± 6.92 MHz
ACS
Relative attenuation (relative to αmin)
fN ± 2.515 MHz...fN ± 3.08 MHz
fN ± 3.08 MHz...fN ± 3.5 MHz
fN ± 3.5 MHz...fN ± 20 MHz
αrel
Temperature coefficient of frequency 2)
Turnover temperature
TCf
—
–0.036
—
ppm/K2
T0
—
20
—
˚C
1)
2)
At other temperatures the variation from filter to filter is also restricted to +/- 5 ns.
From -30 ... +85 ˚ C the variation of mean value of group delay is restricted to +/- 10 ns.
Temperature dependance of fc: fc(TA) = fc(T0) (1 + TCf(TA – T0)2)
Maximum ratings
Operable temperature range T
–40/+85
˚C
Storage temperature range
Tstg
–40/+85
˚C
DC voltage
VDC
3
V
Input Power(passband)
Input Power(stopband)
PIN
PIN
10
20
dBm
dBm
Please read cautions and warnings and
important notes at the end of this document.
3
fN ± 5 MHz...fN ± 70 MHz
Jun 06, 2006
SAW Components
B5026
190.00 MHz
Low-Loss Filter
Data Sheet
Matching network to 50 Ω
Element values depend upon board layout.
Ls2
Lp1 = 39 nH
Ls5
Ls2 = 82 nH
Lp3 = 56 nH
Lp1
Lp4
Lp3
Lp6
Lp4 = 100 nH
Ls5 = 82 nH
Lp6 = 33 nH
Alternative matching network to 50 Ω
Element values depend upon board layout.
Cp1 = 68 pF
Ls2 = 39 nH
Cp3 = 2.2 pF
Cp4 = 1.8 pF
Ls5 = 56 nH
Cp6 = 56 pF
Please read cautions and warnings and
important notes at the end of this document.
4
Jun 06, 2006
SAW Components
B5026
190.00 MHz
Low-Loss Filter
Data Sheet
Transfer function
Transfer function (passband)
Please read cautions and warnings and
important notes at the end of this document.
5
Jun 06, 2006
SAW Components
B5026
190.00 MHz
Low-Loss Filter
Data Sheet
Type
B5026
Ordering code
B39191-B5026-H510
Marking and Package
C61157-A7-A94
Packaging
F61074-V8163-Z000
Date Codes
L_1126
S-Parameters
Soldering profile
S_6001
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2005. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of
the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic
Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
6
Jun 06, 2006
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties
described in the product specification is suitable for use in a particular customer application.
We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled
out in the current state of the art, even if they are operated as specified. In customer
applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger
human life or health (e.g. in accident prevention or life-saving systems), it must therefore be
ensured by means of suitable design of the customer application or other action taken by the
customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is
sustained by third parties in the event of malfunction or failure of a passive electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available.
Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered
or pending in Europe and in other countries. Further information will be found on the Internet
at www.epcos.com/trademarks.
7
Jun 06, 2006
Similar pages