Ecliptek EV32C8 Oscillator Datasheet

EV32C8 Series
• RoHS Compliant (Pb-Free)
• Voltage Controlled Crystal Oscillator (VCXO)
• 3.3V Supply Voltage
• LVCMOS output with Tri-State function
• Ceramic 6-pad SMD package
• APR Performance to ±100ppm
• Commercial and Industrial Temperature Range
EV32C8
H
L
W
1.3
5.0
3.2
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range (FO)
Operating Temperature Range (OTR)
Storage Temperature Range (STR)
Supply Voltage (VDD)
Input Current (IDD)
Frequency Tolerance/Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time (TR/TF)
Duty Cycle (SYM)
Load Drive Capability (CLOAD)
Aging (at 25°C)
Start Up Time (TS)
Tri-State Input Voltage
RMS Phase Jitter
Absolute Pull Range (APR)
Linearity
Control Voltage (VC)
Control Voltage Range (VCR)
Transfer Function
Input Impedance (ZI)
Input Leakage Current
Modulation Bandwidth (MBW)
Typical Phase Noise (Fo = 27.000MHz)
1.544MHz, 2.000MHz, 2.048MHz, 3.088MHz, 3.580MHz, 3.686MHz, 4.000MHz, 4.032MHz, 4.096MHz, 4.434MHz,
5.000MHz, 6.144MHz, 6.176MHz, 6.312MHz, 6.400MHz, 8.000MHz, 8.192MHz, 8.448MHz, 10.000MHz,
12.000MHz, 12.288MHz, 12.352MHz, 12.960MHz, 13.000MHz, 13.500MHz, 14.318MHz, 15.360MHz, 15.440MHz,
16.000MHz, 16.384MHz, 16.660MHz, 17.664MHz, 18.432MHz, 19.200MHz, 19.440MHz, 20.000MHz, 20.480MHz,
24.000MHz, 24.576MHz, 24.704MHz, 25.000MHz, 25.920MHz, 26.000MHz, 27.000MHz, 28.636MHz, 30.000MHz,
30.720MHz, 32.000MHz, 32.768MHz, 34.368MHz, 35.328MHz, 36.864MHz, 38.880MHz, 40.000MHz, 40.960MHz,
44.736MHz, 49.152MHz, 50.000MHz, 51.840MHz, 52.000MHz, 62.208MHz, 65.536MHz, 74.250MHz, 77.760MHz
0°C to +70°C or -40°C to +85°C
-55°C to +125°C
3.3VDC ±10%
15mA Maximum
Inclusive of All Conditions: Calibration Tolerance at 25°C,
±50ppm Maximum
Frequency Stability over the Operating Temperature Range, Supply
Voltage Change, Output Load Change, Shock, and Vibration
IOH = -4mA
90% of VDD Minimum
IOL = +4mA
10% of VDD Maximum
20% to 80% of Waveform
5 nSeconds Maximum
at 50% of Waveform
50 ±5(%) Typical, 50 ±10(%) Maximum
15pF Maximum
±2ppm/1st year typical, ±10ppm /10 years Max.
10 mSeconds Maximum
VIH: No Connection
Enables Output
VIH: >0.9VDD
Enables Output
VIL: <0.1VDD
Disables Output: High Impedance
FJ=12kHz to 20MHz
1pSec Maximum
Inclusive of All Conditions: Calibration Tolerance at 25°C,
±50ppm Minimum
Frequency Stability over the Operating Temperature Range, Supply ±80ppm Minimum < 51.840MHz only
Voltage Change, Output Load Change, Shock, Vibration, and Aging ±100ppm Minimum < 36.000MHz only
over Control Voltage (VC)
10% Typical, 20% Maximum
Test Condition for APR
0.3VDC to 3.0VDC
0.0VDC to VDD
Positive Transfer Characteristic
50kOhms Minimum
10µA Maximum
-3dB, VC = 1.65VDC
10kHz Minimum
At offset of 10Hz
-65dBc/Hz
At offset of 100Hz
-95dBc/Hz
At offset of 1kHz
-120dBc/Hz
At offset of 10kHz
-142dBc/Hz
At offset of 100kHz
-152dBc/Hz
At offset of 1MHz
-154dBc/Hz
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EV32C8
CERAMIC
3.3V
OS7M
09/09
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE
EV32C8 B 3 A 1 - 35.328M TR
AVAILABLE OPTIONS
Blank=Bulk (Standard)
TR=Tape and Reel
OPERATING TEMPERATURE RANGE
A=0°C to +70°C,
B=-40°C to +85°C
FREQUENCY
ABSOLUTE PULL RANGE (APR)
3=±50ppm Minimum
4=±80ppm Minimum,
5=±100ppm Minimum
DUTY CYCLE
1=50 ±5(%) Typical, 50 ±10(%) Maximum
LINEARITY
A=10% Typical, 20% Maximum
MECHANICAL DIMENSIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
3.20
±0.15
1.20
±0.15
1.30
MAX
1
5
2
4
3
1.27
±0.15
0.27
0.64
±0.10
1.00
±0.15
Pin 1: Control Voltage (VC)
Pin 2: Tri-State
Pin 3: Case Ground
TAPE AND REEL DIMENSIONS
1.00
(X6)
0.27
2.54
±0.15
5.00
±0.15
6
1.40
(X6)
Solder Land
(X6)
Pin 4: Output
Pin 5: No Connect
Pin 6: Supply Voltage
0.80
Tolerances= +0.1
ALL DIMENSIONS IN MILLIMETERS
TAPE
A
B
C
D
E
16.0 ±0.3
7.5 ±0.1
6.75 ±0.1
4.0 ±0.1
2.0 ±0.05
L
F
G
H
J
K
8.0 ±0.1
B0*
1.5 +0.1-0.0
A0*
0.3 ± 0.1
F
M
N
1.5 MIN
50 MIN
REEL
K0*
O
P
20.2 MIN 13.0±0.2
R
S
T
U
V
2.5 MIN
10 MIN
22.4 MAX
360 MAX
16.4+2-0
Q
40 MIN
QTY/REEL
1,000
*Compliant to EIA 481A
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Characteristic
Specification
ESD Susceptibility
Fine Leak Test
Flammability
Gross Leak Test
Mechanical Shock
Moisture Resistance
Moisture Sensitivity
Resistance to Soldering Heat
Resistance to Solvents
Solderability
Temperature Cycling
Vibration
MIL-STD-883, Method 3015, Class 1, HBM: 1500V
MIL-STD-883, Method 1014, Condition A
UL94-V0
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 1004
J-STD-020, MSL 1
MIL-STD-202, Method 210, Condition K
MIL-STD-202, Method 215
MIL-STD-883, Method 2003
MIL-STD-883, Method 1010, Condition B
MIL-STD-883, Method 2007, Condition A
Line 1: EXX.XXX
Frequency in MHz (5 Digits Maximum + Decimal)
Line 2: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EV32C8
CERAMIC
3.3V
OS7M
09/09
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
Similar pages