DTA123YE / DTA123YUA / DTA123YCA PNP Digital Transistors (Built-in Resistors) Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. Only the on/off conditions need to be set for operation, making device design easy. DTA123YUA (SOT-323) DTA123YE (SOT-523) Addreviated symbol：52 Addreviated symbol：52 DTA123YCA (SOT-23) EQUIVALENT CIRCUIT Addreviated symbol：52 ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise noted) Limits (DTA123Y□) Parameter Symbol Unit E UA CA Collector-Base Voltage VCC -50 V Input voltage VIN -12~5 V IO -100 IC(MAX) -100 Output current Power dissipation Junction & Storage temperature http://www.SeCoSGmbH.com/ 20-Feb-2012 Rev.B PD TJ, TSTG 150 mA 200 150, -55~150 mW °C Any changes of specification will not be informed individually. Page 1 of 2 DTA123YE / DTA123YUA / DTA123YCA PNP Digital Transistors (Built-in Resistors) Elektronische Bauelemente ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) Symbol Min. Typ. Max. VI(off) - - -0.3 VI(on) -3 - - VO(on) - - -0.3 V II - - -3.8 mA VI= -5V IO(off) - - -0.5 μA VCC= -50V, VI=0 DC current gain GI 33 - - Input resistance R1 1.54 2.2 2.86 Resistance ratio R2/R1 3.6 4.5 5.5 fT - 250 - Parameter Input voltage Output voltage Input current Output current Transition frequency Unit V Test Conditions VCC= -5V, IO= -100μA VO= -0.3V, IO= -20mA IO / II= -10mA / -0.5mA VO= -5V, IO= -10mA KΩ MHz VO= -10V, IO=5mA, f=100MHz CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 20-Feb-2012 Rev.B Any changes of specification will not be informed individually. Page 2 of 2