ZETTLER AZ8521PS-5 Dpdt subminiature signal relay Datasheet

AZ8521
DPDT SUBMINIATURE
SIGNAL RELAY
FEATURES
• SMT and THT mounting available
• High dielectric and surge voltage:
2.5 kV surge (per Bellcore TA-NWT-001089)
1.5 kV surge (per FCC Part 68)
1,000 Vrms, open contacts
1,600 Vrms, coil to contacts
• Conforms to IEC60950 / EN41003 spacing and high
break down voltage
• Monostable and bistable (latching) versions available
• Minimum switching load 10 mV, 10 µA
• Low power consumption: 79 mW pickup
• Stable contact resistance for low level signal switching
• Epoxy sealed
• UL, CUR file E43203
GENERAL DATA
Life Expectancy
Mechanical
Electrical
CONTACTS
Arrangement
DPDT (2 Form C)
Ratings
Resistive load:
Max. switched power: 60 W or 62.5 VA
Max. switched current: 2 A
Max. switched voltage: 220 VDC* or 250 VAC
3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.)
1600 Vrms coil to contacts
1800 Vrms between contact sets
1000 Vrms between open contacts
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
Vibration
3.3 mm DA at 10–55 Hz
Shock
75 g operating, 100 g damage
Enclosure
LCP
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Monostable: 79 mW (1.5 - 12 VDC)
Monostable: 113 mW (24 VDC)
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Bistable latching: 57 mW (1.5 - 12 VDC)
Bistable latching: 113 mW (24 VDC)
Weight
0.8 grams
Packing unit in pcs
40 per plastic tube / 4000 per carton box
900 per reel / 3600 per carton box
Material
Silver nickel gold plated
Resistance
< 70 milliohms initially
COIL
Power
570 mW at 20°C (68°F) ambient
NOTES
Temperature Rise
40°C (72°F) (3 - 12 VDC)
(at nominal voltage) 50°C (90°F) (24 VDC)
Temperature
3 ms at nominal coil voltage
Release Time (max.)
Insulation
Resistance
0.5 A at 125 VAC, resistive, 40°C, 100k cycles
2 A at 30 VDC, resistive, 40°C, 100k cycles
1 A at 30 VDC, resistive, 85°C, 100k cycles
Max. Continuous
Dissipation
Operate Time (max.)
2500 V (at 2/10 µs)
1500 V (at 10/160 µs)
special precautions must be taken.
Please contact the factory.
At Pickup Voltage
(typical)
1 x 105 at 0.5 A 125 VAC Res.
1 x 105 at 2 A 30 VDC Res.
Surge Voltage
Coil to contacts
Open contacts
* Note: If switching voltage is greater than 30 VDC,
Rated Load
UL, CUR
Minimum operations
1 x 108
Max. 115°C (239°F)
1.
2.
3.
4.
All values at 20°C (68°F)
Relay may pull in with less than “Must Operate” value.
Relay has fixed coil polarity.
Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-22
AZ8521
RELAY ORDERING DATA
NON-LATCHING VERSION
COIL SPECIFICATIONS
Nominal Coil
VDC
Must Operate
VDC
1.5
ORDER NUMBER
Max. Continuous
VDC
Coil Resistance
Ohm ± 10
THT
SMT
SMT Short Leg*
2.2
16
AZ8521-1.5
AZ8521S-1.5
AZ8521S1-1.5
AZ8521-3
AZ8521S-3
AZ8521S1-3
1.13
3
2.25
4.5
64.3
4.5
3.38
6.7
145
AZ8521-4.5
AZ8521S-4.5
AZ8521S1-4.5
5
3.75
7.5
178
AZ8521-5
AZ8521S-5
AZ8521S1-5
6
4.5
9.0
257
AZ8521-6
AZ8521S-6
AZ8521S1-6
9
6.75
13.5
579
AZ8521-9
AZ8521S-9
AZ8521S1-9
12
9.0
18.0
1,028
AZ8521-12
AZ8521S-12
AZ8521S1-12
24
18.0
36.0
2,880
AZ8521-24
AZ8521S-24
AZ8521S1-24
LATCHING VERSION
COIL SPECIFICATIONS
Nominal Coil
VDC
Set/Reset
VDC
1.5
ORDER NUMBER*
Max. Continuous
VDC
1.13
Coil Resistance
Ohm ± 10
2.2
22.5
THT
SMT
SMT Short Leg*
AZ8521P-1.5
AZ8521PS-1.5
AZ8521PS1-1.5
AZ8521P-3
AZ8521PS-3
AZ8521PS1-3
3
2.25
4.5
90
4.5
3.38
6.7
203
AZ8521P-4.5
AZ8521PS-4.5
AZ8521PS1-4.5
5
3.75
7.5
250
AZ8521P-5
AZ8521PS-5
AZ8521PS1-5
6
4.5
9.0
360
AZ8521P-6
AZ8521PS-6
AZ8521PS1-6
9
6.75
13.5
810
AZ8521P-9
AZ8521PS-9
AZ8521PS1-9
12
9.0
18.0
1,440
AZ8521P-12
AZ8521PS-12
AZ8521PS1-12
24
18.0
36.0
2,880
AZ8521P-24
AZ8521PS-24
AZ8521PS1-24
* Add suffix “TR” at the end of order number for reel packing. (Only available for SMT)
TEMPERATURE (˚C)
SOLDERING DATA
T 4= 245˚C MAX
SOLDERING
T4
T 3= 220˚C MAX
T3
T 2= 180˚C MAX
T2
T1
3˚C/s MAX
COOLING
6˚C/s MAX
PREHEATING
100 SEC MAX
T 1= 150˚C MAX
60 SEC MAX
100 SEC MAX
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-22
AZ8521
MECHANICAL DATA
THT version
.394
[10.00]
.256
[6.50]
PC Board Layout
.126
[3.20]
.087 .087
[2.20] [2.20]
.213
[5.40]
.200
[5.08]
.130
[3.30]
.012
[0.30]
8 x Ø .033
[Ø 0.85]
.047
[1.20]
(Viewed toward terminals)
SMT version with long terminals - "S"
.394
[10.00]
PC Board Layout
.256
[6.50]
.126
[3.20]
.087 .087
[2.20] [2.20]
.085
[2.15]
.222
[5.65]
.031
[0.80]
.047
[1.20]
.250
[6.35]
.295
[7.50]
(Viewed toward terminals)
SMT version with short terminals - "S1"
.394
[10.00]
PC Board Layout
.256
[6.50]
.065
[1.65]
.126
[3.20]
.087 .087
[2.20] [2.20]
.222
[5.65]
.031
[0.80]
.047
[1.20]
.230
[5.85]
.259
[6.60]
(Viewed toward terminals)
Wiring Diagram
1
2
3
1
4
7
6
5
4
7
6
5
reset
set
8
3
+
-
-
2
-
+
+
8
Non-Latching
Latching
(Viewed toward terminals)
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .016"
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-22
AZ8521
PACKAGING
Tape and reel for SMT version with long terminals - “S”
Section B-B
Section A-A
2
±
0.1
A
6.5
24 ± 0.3
11.4 ± 0.2
11.5
1.5
0.1
0.1
1.75
4
±
±
Ø 2 min.
B
B
3˚ max.
9.1 ± 0.2
3˚ max.
0.5 ± 0.05
12
A
Tape and reel for SMT version with short terminals - “S1”
Section B-B
Section A-A
2
±
0.1
A
6.5
24 ± 0.3
11.4 ± 0.2
11.5
1.5
0.1
0.1
1.75
4
±
±
Ø 2 min.
B
B
3˚ max.
8.0 ± 0.2
3˚ max.
12
0.5 ± 0.05
A
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP
Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-22
Similar pages