EUROQUARTZ EQXO-2025UI-GW 8 pin dual-in-line gull-wing clock ocillator Datasheet

EURO QUARTZ
EQXO-2000GW Series
8 pin Dual-in-Line Gull-Wing Clock Ocillators
8 pin DIL package with 'Gull-Wing' leads for SMD use
Wide frequency range 20kHz to 160MHz
Choice of supply voltage 3.3 Volts or 5.0 Volts DC
Hermetically sealed package for reliability and low ageing
Optional Tristate function (Enable/Disable)
Comprehensive stock holding
Custom frequencies readily produced in Euroquartz factory
OUTLINE & DIMENSIONS
DESCRIPTION
The Euroquartz EQXO-2000 series of 8 pin dual-in-line oscillators
consist of a Universal, TTL and CMOS compatible hybrid substrate and
quartz crystal in a hermetically-sealed package. The oscillators
provide a proven and reliable source of clock signals with low unit
cost.
SPECIFICATION
Series Model Number:
Frequency Range:
Frequency Stability*:
Supply Voltage:
Output Load
HCMOS:
TTL:
Symmetry
HCMOS:
TTL:
Operating Temperature Range
Commercial:
Industrial:
Extended Industrial:
Storage Temperature Range:
Start-up Time:
Current Consumption:
EQXO-2000GW
20kHz to 160MHz
See table
+5.0VDC±10% or +3.3VDC±5%
15pF standard, 50pF available
2 to 10TTL gates
40/60% measured at 50%Vdd
40/60% measured at 1.4 Volts
0° to +70°C
-40° to +85°C
-55° to +105°C
-55° to +105°C
5ms typical, 10ms max.
15mA ~ 45mA
(frequency dependant)
Tristate Option:
Output is high impedance when
'0' (<0.8 Volts) is applied to Pin 1,
(internal pull-up).
Disable time = 150ns max.
* The frequency stability parameter is inclusive of frequency adjustment
at 25°C and any variations due to load change, ageing, supply voltage
change (±10%) and variations attributable to shock and vibration.
Frequency Range:
Output Voltage
TTL HIGH '1':
HCMOS HIGH '1':
TTL LOW '0:
HCMOS LOW '0':
Model Number
EQXO-2010UC-GW
EQXO-2015UC-GW
EQXO-2025UC-GW
EQXO-2050UC-GW
EQXO-2100UC-GW
EQXO-2025UI-GW
EQXO-2050UI-GW
EQXO-2100UI-GW
EQXO-2050UIE-GW
EQXO-2100UIE-GW
Stability
Over O.T.R.
(ppm)
Operating
Temperature
Range
±10ppm
±15ppm
±25ppm
±50ppm
±100ppm
±25ppm
±50ppm
±100ppm
±50ppm
±100ppm
0° ~ +50°C
0° ~ +70°C
0° ~ +70°C
0° ~ +70°C
0° ~ +70°C
-40° ~ +85°C
-40° ~ +85°C
-40° ~ +85°C
-55° ~ +105°C
-55° ~ +105°C
EXTENDED INDUSTRIAL TEMPERATURE RANGE
The part previously specified by Euroquartz Ltd as EQXO-2050UMGW or EQXO-2100UM-GW has been superceeded by the
extended-industrial temperature range part EQXO-2***UIE-GW.
This part will perform within specification over the temperature
range of -55° to +105°C. Should a full military temperature range
oscillator be required see specification for EQXO-2000BM series.
PART NUMBER GENERATION
TTL/HCMOS Voltage Levels
Input Voltage:
MODEL NUMBERS
+5.0 VDC
EQXO-2000-GW series oscillator part numbers are derived as
follows: Example: 10.000MHz EQXO-2050UIET3-GW:
20kHz ~ 125MHz
20kHz ~ 160MHz
10.000MHz EQXO-2050 U IE T 3 -GW
2.4 V min.
2.97 V min.
0.4V max.
0.33V max.
2.4V min.
Vcc - 0.5V min.
0.4V max.
0.5V max
+3.3 VDC
Frequency
Model number
(see table above)
U - Universal output
C - Commercial temperature
I - Industrial temperature
IE - Extended Industrial temperature
T - Tristate function (option)
Blank - 5.0 Volts supply
33.3 Volts supply
GW - Gull-wing leads
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: [email protected] www.euroquartz.co.uk
Similar pages