TOSHIBA TLP548J

TLP548J
TOSHIBA Photocoupler
GaAs Ired & Photo-Thyristor
TLP548J
Office Machine
Household Use Equipment
Solid State Relay
Switching Power Supply
The TOSHIBA TLP548J consists of a photo−thyristor optically coupled to
a gallium arsenide infrared emitting diode in a six lead plastic DIP
package.
•
Peak off-state voltage: 600 V (min)
•
Trigger LED current: 7 mA (max)
•
On-state current: 150 mA (max)
•
Isolation voltage: 2500 Vrms (min)
•
UL recognized: UL1577, file no. E67349
TOSHIBA
11−7A8
Weight: 0.4 g (typ.)
Pin Configuration (top view)
1: ANODE (LED)
2: CATHODE (LED)
3: N.C.
4: CATHODE (SCR)
5: ANODE (SCR)
6: GATE
1
2009-10-20
TLP548J
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
IF
50
mA
ΔIF / °C
−0.7
mA / °C
Peak forward current (100 μs pulse, 100 pps)
IFP
1
A
Reverse voltage
VR
5
V
Peak forward voltage (RGK = 27kΩ)
VDRM
600
V
Peak reverse voltage (RGK = 27kΩ)
VRRM
600
V
On−state current
IT (RMS)
150
mA
On−state current derating (Ta ≥ 25°C)
ΔIT / °C
−2.0
mA / °C
ITP
3
A
Peak one cycle surge current
ITSM
2
A
Peak reverse gate voltage
VGM
5
V
Operating temperature range
Topr
−40 to 100
°C
Storage temperature range
Tstg
−55 to 125
°C
Lead soldering temperature (10 s)
Tsol
260
°C
BVS
2500
Vrms
Detector
LED
Forward current
Forward current derating (Ta ≥ 53°C)
Peak on−state current (100 μs pulse, 120 pps)
Isolation voltage (AC, 1 min., R.H. ≤ 60%)
(Note 1)
Note:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability
Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e.
reliability test report and estimated failure rate, etc).
Note 1: Device Considered a two terminal device : pins 1,2 and 3 shorted together and pins 4,5 and 6 shorted
together.
Recommended Operating Conditions
Characteristic
Symbol
Min
Typ.
Max
Unit
Supply voltage
VAC
―
―
240
Vac
Forward current
IF
10
―
25
mA
Operating temperature
Topr
−25
―
85
°C
Gate to cathode resistance
RGK
―
27
33
kΩ
Gate to cathode capacity
CGK
―
0.01
0.1
μF
Note 2: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
2
2009-10-20
TLP548J
Individual Electrical Characteristics (Ta = 25°C)
Detector
LED
Characteristic
Symbol
Test Condition
Min
Typ.
Max
Unit
Forward voltage
VF
IF = 10 mA
1.0
1.15
1.3
V
Reverse current
IR
VR = 5 V
―
―
10
μA
Capacitance
CT
V = 0, f = 1 MHz
―
30
―
pF
Off−state current
IDRM
VAK = 600 V, RGK = 27 kΩ
―
―
5
μA
Reverse current
IRRM
VKA = 600 V, RGK = 27 kΩ
―
―
5
μA
On−state voltage
VTM
ITM = 100 mA, IF = 7 mA
―
1.25
1.45
V
RGK = 27 kΩ
―
0.5
1
mA
VAK = 420 V, RGK = 27 kΩ
5
―
―
V/μs
Anode to gate
―
5
―
Gate to cathode
―
500
―
Min
Typ.
Max
Unit
Holding current
IH
Off−state dv/dt
dv/dt
Capacitance
Cj
V = 0, f = 1 MHz
pF
Coupled Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Trigger LED current
IFT
VAK = 6 V, RGK = 27 kΩ
―
3
7
mA
Turn−on time
ton
IF = 30 mA, VAA = 50 V,
RGK = 27 kΩ
―
10
―
μs
Capacitance
(input to output)
CS
VS = 0, f = 1 MHz
―
0.8
―
pF
―
Ω
Isolation resistance
RS
VS = 500 V, R.H. ≤ 60%
AC, 1 minute
Isolation voltage
BVS
10
5×10
10
14
2500
―
―
AC, 1 second, in oil
―
5000
―
DC, 1 minute, in oil
―
5000
―
3
Vrms
Vdc
2009-10-20
TLP548J
I F ─ Ta
I T(RMS) ─ Ta
80
R.M.S. ON-STATE CURRENT
IT(RMS) (mA)
ALLOWABLE FORWARD CURRENT
IF (mA)
100
60
40
20
0
-40
-20
0
20
40
60
80
100
120
AMBIENT TEMPERATURE Ta(℃)
AMBIENT TEMPERATURE Ta(℃)
IFP- DR
I F ─V F
3000
Ta = 25 ℃
Pulse width ≦ 100μs
Ta = 25°C
FORWARD CURRENT IF (mA)
ALLOWABLE PULSE FORWARD CURRENT
IFP (mA)
100
1000
500
300
100
50
30
10
3
10-3
3
10-2
3
10-1
3
100
10
1
0.1
0.6
0.8
DUTY CYCLE RAITO DR
1
1.2
1.4
1.6
1.8
FORWARD VOLTAGE VF (V)
IFP - VFP
FORWARD VOLTAGE TEMPERATURE
COEFFICIENT ΔVF /ΔTa (mV/℃)
PULSE FORWARD CURRENT IF P (mA)
Δ V F / Δ Ta - I F
FORWARD CURRENT IF (mA)
1000
500
300
100
50
30
10
Pulse width ≦ 10μs
5
Repetitive
3
frequency = 100Hz
Ta = 25°C
1
0.6
1.0
1.4
1.8
2.2
2.6
PULSE FORWARD VOLTAGE VF P (V)
*: The above graphs show typical characteristics.
4
2009-10-20
TLP548J
I H ─ Ta
IFT-Ta
2.0
HOLDING CURRENT IH (mA)
TRIGGER LED CURRENT IFT (mA)
10
5
3
VAK = 6V
RGK = 27k Ω
RL = 100 Ω
RGK = 27kΩ
1.0
SPL B
0.5
SPL A
1
-40
-20
0
20
40
60
80
100
0.1
-40
AMBIENT TEMPERATURE Ta(℃)
-20
0
20
40
60
80
AMBIENT TEMPERATURE Ta(℃)
100
V T M - Ta
ON-STATE VOLTAGE VTM (V)
1.4
ITM = 100mA
1.2
ITM = 50mA
1.0
ITM = 10mA
ITM = 1mA
0.8
0.6
-40
-20
0
20
40
60
80
100
AMBIENT TEMPERATURE Ta(℃)
*: The above graphs show typical characteristics.
5
2009-10-20
TLP548J
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
6
2009-10-20