TOSHIBA RN1003

RN1001~RN1006
TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process)
RN1001,RN1002,RN1003
RN1004,RN1005,RN1006
Switching, Inverter Circuit, Interface Circuit
And Driver Circuit Applications
Unit: mm
l With built-in bias resistors
l Simplify circuit design
l Reduce a quantity of parts and manufacturing process
l Complementary to RN2001~RN2006
Equivalent Circuit and Bias Resister Values
Type No.
R1 (kΩ)
R2 (kΩ)
RN1001
4.7
4.7
RN1002
10
10
RN1003
22
22
RN1004
47
47
RN1005
2.2
47
RN1006
4.7
47
JEDEC
EIAJ
TOSHIBA
Weight: 0.21g
Maximum Ratings (Ta = 25°C)
Characteristic
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
RN1001~1006
RN1001~1004
RN1005, 1006
Collector current
Collector power dissipation
Junction temperature
Storage temperature range
RN1001~1006
Symbol
Rating
Unit
VCBO
50
V
VCEO
50
V
10
VEBO
5
V
IC
100
mA
PC
400
mW
Tj
150
°C
Tstg
−55~150
°C
1
TO-92
SC-43
2-5F1B
2001-06-07
RN1001~RN1006
Electrical Characteristics (Ta = 25°C)
Characteristic
Collector cut-off
current
Test
Circuit
Min
Typ.
Max
VCB = 50V, IE = 0
―
―
100
VCE = 50V, IB = 0
―
―
500
0.82
―
1.52
0.38
―
0.71
0.17
―
0.33
0.082
―
0.15
0.078
―
0.145
0.074
―
0.138
RN1001
30
―
―
RN1002
50
―
―
70
―
―
80
―
―
RN1005
80
―
―
RN1006
80
―
―
―
0.1
0.3
RN1001
1.1
―
2.0
RN1002
1.2
―
2.4
1.3
―
3.0
1.5
―
5.0
RN1005
0.6
―
1.1
RN1006
0.7
―
1.3
1.0
―
1.5
0.5
―
0.8
RN1001~1006
Symbol
ICBO
―
ICEO
Test Condition
RN1001
RN1002
Emitter cut-off current
RN1003
RN1004
VEB = 10V, IC = 0
IEBO
―
RN1005
VEB = 5V, IC = 0
RN1006
DC current gain
Collector-emitter
saturation voltage
Input voltage (ON)
RN1003
RN1004
RN1001~1006
RN1003
RN1004
Input voltage (OFF)
RN1001~1004
Collector Output
capacitance
Input resistor
Resistor ratio
VCE (sat)
VI (ON)
―
―
―
VCE = 5V, IC = 10mA
IC = 5mA, IB = 0.25mA
VCE = 0.2V, IC = 5mA
nA
mA
―
V
V
VI (OFF)
―
VCE = 5V, IC = 0.1mA
fT
―
VCE = 10V, IC = 5mA
―
250
―
MHz
―
VCB = 10V, IE = 0,
f = 1MHz
―
3
6
pF
RN1001
3.29
4.7
6.11
RN1002
7
10
13
15.4
22
28.6
RN1004
32.9
47
61.1
RN1005
1.54
2.2
2.86
RN1006
3.29
4.7
6.11
RN1001~1004
0.9
1.0
1.1
0.0421
0.0468
0.0515
0.09
0.1
0.11
RN1005, 1006
Transition frequency
hFE
Unit
RN1001~1006
RN1001~1006
RN1003
RN1005
Cob
R1
R1/R2
―
―
RN1006
2
V
kΩ
―
2001-06-07
RN1001~RN1006
3
2001-06-07
RN1001~RN1006
4
2001-06-07
RN1001~RN1006
5
2001-06-07
RN1001~RN1006
RESTRICTIONS ON PRODUCT USE
000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
6
2001-06-07