TC7SH86FE TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7SH86FE Exclusive OR Gate Features • Super high speed operation : tPD = 4.8 ns (typ.) @VCC = 5 V • Low power dissipation : ICC = 2 µA (Max.) @ Ta = 25°C • High noise immunity : VNIH = VNIH = 28% VCC (Min.) • 5.5V tolerant input. • Wide operation voltage range : VCC (opr) = 2~5.5 V Weight: 0.003 g (typ.) Marking Pin Assignment (top view) Type name H 8 IN B 1 IN A 2 GND 3 5 VCC 4 OUT Y Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Supply voltage range VCC −0.5~7 V DC input voltage VIN −0.5~7 V DC output voltage VOUT −0.5~VCC + 0.5 V Input diode current IIK −20 mA Output diode current IOK ±20 mA DC output current IOUT ±25 mA DC VCC/ground current ICC ±50 mA Power dissipation PD 150 mW Storage temperature Tstg −65~150 °C 1 2004-01-08 TC7SH86FE Logic Diagram Truth Table IN A OUT Y =1 IN B A B Y L L L L H H H L H H H L Recommended Operating Conditions Characteristics Symbol Rating Unit Supply voltage VCC 2～5.5 V Input voltage VIN 0~5.5 V VOUT 0~ VCC V Operating temperature Topr −40~85 °C Input rise and fall time dt/dv Output voltage 0~100 ( VCC = 3.3 V ± 0.3 V ) ns/V 0~20 ( VCC = 5 V ± 0.5 V ) Electrical Characteristics DC Characteristics Characteristics Symbol Test Circuit Test Condition ⎯ High-level input voltage VIH ⎯ Low-level input voltage VIL ⎯ Ta = 25°C VCC (V) Min Typ. Max Min Max 2.0 1.5 ⎯ ⎯ 1.5 ⎯ 3.0~5.5 VCC × 0.7 ⎯ ⎯ VCC × 0.7 ⎯ 2.0 ⎯ ⎯ 0.5 ⎯ 0.5 3.0~5.5 ⎯ ⎯ VCC × 0.3 ⎯ VCC × 0.3 2.0 1.9 2.0 ⎯ 1.9 ⎯ 3.0 2.9 3.0 ⎯ 2.9 ⎯ 4.5 4.4 4.5 ⎯ 4.4 ⎯ IOH = −4 mA 3.0 2.58 ⎯ ⎯ 2.48 ⎯ IOH = −8 mA 4.5 3.94 ⎯ ⎯ 3.80 ⎯ 2.0 ⎯ 0 0.1 ⎯ 0.1 3.0 ⎯ 0 0.1 ⎯ 0.1 4.5 ⎯ 0 0.1 ⎯ 0.1 IOL = 4 mA 3.0 ⎯ ⎯ 0.36 ⎯ 0.44 IOL = 8 mA 4.5 ⎯ ⎯ 0.36 ⎯ 0.44 ⎯ IOH = −50 µA High-level output voltage VOH ⎯ VIN = VIH or VIL IOL = 50 µA Low-level output voltage VOL ⎯ Ta = −40~85°C VIN = VIH or VIL Unit V V V V Input leakage current IIN ⎯ VIN = 5.5 V or GND 0~5.5 ⎯ ⎯ ±0.1 ⎯ ±1.0 µA Quiescent supply current ICC ⎯ VIN = VCC or GND 5.5 ⎯ ⎯ 2.0 ⎯ 20.0 µA 2 2004-01-08 TC7SH86FE AC Characteristics (input: tr = tf = 3 ns) Characteristics Symbol VCC (V) Ta = −40~85°C Unit CL (pF) Min Typ. Max Min Max 15 ⎯ 7.0 11.0 1.0 13.0 tPLH 50 ⎯ 9.5 14.5 1.0 16.5 tPHL 15 ⎯ 4.8 6.8 1.0 8.0 50 ⎯ 6.3 8.8 1.0 10.0 ⎯ 4 10 ⎯ 10 pF ⎯ 18 ⎯ ⎯ ⎯ pF 3.3 ± 0.3 Propagation delay time Ta = 25°C Test Condition Input capacitance CIN Power dissipation capacitance CPD 5.0 ± 0.5 (Note) ns Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation. ICC (opr) = CPD･VCC･fIN + ICC 3 2004-01-08 TC7SH86FE Package Dimensions Weight: 0.003 g (typ.) 4 2004-01-08 TC7SH86FE RESTRICTIONS ON PRODUCT USE 030619EBA • The information contained herein is subject to change without notice. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • The products described in this document are subject to the foreign exchange and foreign trade laws. • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 5 2004-01-08