RN4989 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) Silicon PNP Epitaxial Type (PCT Process) RN4989 Switching, Inverter Circuit, Interface Circuit And Driver Circuit Applications Unit: mm Includeing two devices in US6 (ultra super mini type with 6 leads) With built-in bias resistors Simplify circuit design Reduce a quantity of parts and manufacturing process Equivalent Circuit and Bias Resister Values R1: 47kΩ R2: 22kΩ (Q1, Q2 Common) Q1 Maximum Ratings (Ta = 25°°C) Characteristic Symbol Rating Unit Collector-base voltage VCBO 50 V Collector-emitter voltage VCEO 50 V Emitter-base voltage VEBO 15 V IC 100 mA Symbol Rating Unit Collector-base voltage VCBO −50 V Collector-emitter voltage VCEO −50 V Emitter-base voltage VEBO −15 V IC −100 mA Collector current JEDEC EIAJ TOSHIBA Weight: 6.8mg ― ― 2-2J1A Q2 Maximum Ratings (Ta = 25°°C) Characteristic Collector current 1 2001-06-07 RN4989 Q1, Q2 Common Maximum Ratings (Ta = 25°°C) Characteristic Collector power dissipation Junction temperature Storage temperature range Symbol Rating Unit PC * 200 mW Tj 150 °C Tstg −55~150 °C * : Total rating Marking Equivalent Circuit (Top View) 2 2001-06-07 RN4989 Q1 Electrical Characteristics (Ta = 25°C) Characteristic Collector cut-off current Emitter cut-off current DC current gain Symbol Test Circuit ICBO ― ICEO IEBO Test Condition Min Typ. Max Unit VCB = 50V, IE = 0 ― ― 100 ― VCE = 50V, IB = 0 ― ― 500 ― VEB = 15V, IC = 0 0.167 ― 0.311 mA nA hFE ― VCE = 5V, IC = 10mA 70 ― ― ― VCE (sat) ― IC = 5mA, IB = 0.25mA ― 0.1 0.3 V Input voltage (ON) VI (ON) ― VCE = 0.2V, IC = 5mA 2.2 ― 5.8 V Input voltage (OFF) VI (OFF) ― VCE = 5V, IC = 0.1mA 1.5 ― 2.6 V Transition frequency fT ― VCE = 10V, IC = 5mA ― 250 ― MHz Cob ― VCB = 10V, IE = 0, f = 1 MHz ― 3 6 pF Min Typ. Max Unit Collector-emitter saturation voltage Collector output capacitance Q2 Electrical Characteristics (Ta = 25°C) Symbol Test Circuit ICBO ― VCB = −50V, IE = 0 ― ― −100 ICEO ― VCE = −50V, IB = 0 ― ― −500 Emitter cut-off current IEBO ― VEB = −15V, IC = 0 −0.167 ― −0.311 mA DC current gain hFE ― VCE = −5V, IC = −10mA 70 ― ― ― VCE (sat) ― IC = −5mA, IB = −0.25mA ― −0.1 −0.3 V Input voltage (ON) VI (ON) ― VCE = −0.2V, IC = −5mA −2.2 ― −5.8 V Input voltage (OFF) VI (OFF) ― VCE = −5V, IC = −0.1mA −1.5 ― −2.6 V Transition frequency fT ― VCE = −10V, IC = −5mA ― 200 ― MHz Cob ― VCB = −10V, IE = 0 ― 3 6 pF Characteristic Collector cut-off current Collector-emitter saturation voltage Collector output capacitance Test Condition nA Q1, Q2 Common Electrical Characteristics (Ta = 25°C) Symbol Test Circuit Test Condition Min Typ. Max Unit Input resistor R1 ― ― 32.9 47 61.1 kΩ Resistor ratio R1/R2 ― ― 1.92 2.14 2.35 ― Characteristic 3 2001-06-07 RN4989 Q1 4 2001-06-07 RN4989 Q2 5 2001-06-07 RN4989 RESTRICTIONS ON PRODUCT USE 000707EAA • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. • The information contained herein is subject to change without notice. 6 2001-06-07