DTA143ZE/DTA143ZUA/DTA143ZCA/ DTA143ZKA/DTA143ZSA Digital Transistor (PNP) Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). 2) The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. 3) Only the on/off conditions need to be set for operation, making device design easy. PIN CONNENCTIONS AND MARKING DTA143ZUA DTA143ZE SOT-523 Addreviated symbol: E13 DTA143ZKA SOT-323 Addreviated symbol: 113 DTA143ZCA DTA114ECA SOT-23-3L Addreviated symbol: E13 SOT-23 Addreviated symbol: E13 DTA143ZSA TO-92S Revision:20170301-P1 ht t p : // www.lgesem i .c o m mail:[email protected] DTA143ZE/DTA143ZUA/DTA143ZCA/ DTA143ZKA/DTA143ZSA Digital Transistor (PNP) Absolute maximum ratings(Ta=25℃) Limits (DTA143Z□ ) Parameter Symbol Supply voltage VCC -50 V Input voltage VIN -30~5 V E UA KA CA Unit SA Output current IO -100 IC(MAX) -100 Power dissipation Pd Junction temperature Tj 150 ℃ Storage temperature Tstg -55~150 ℃ 150 200 mA 300 mW Electrical characteristics (Ta=25℃) Parameter Input voltage Symbol Min. Typ VI(off) VI(on) Max. -0.5 -1.3 Unit V Conditions VCC=-5V ,IO=-100µA VO=-0.3V ,IO=-5 mA Output voltage VO(on) -0.3 V IO/II=-5mA/-0.25mA Input current II -1.8 mA VI=-5V Output current IO(off) -0.5 µA VCC=-50V ,VI=0 DC current gain GI 80 Input resistance R1 3.29 4.7 6.11 Resistance ratio R2/R1 8 10 12 Transition frequency fT VO=-5V ,IO=-10mA 250 KΩ MHz VO=-10V ,IO=-5mA,f=100MHz Typical Characteristics Revision:20170301-P2 ht t p : // www.lgesem i .c o m mail:[email protected]