CHEMI-CON ELBK350ELL312AM20S Miniature aluminum electrolytic capacitor Datasheet

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
For airbag module, 105℃
LBK
Series
・Downsizing of LBG series.
・For airbag application and power supply application
・High capacitance, low ESR and good low temperature behavior
・Endurance with ripple current : 5,000 hours at 105℃
・Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・RoHS Compliant
・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.
LBK
Downsized
LBG P226
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
Rated Voltage Range
Capacitance Range
Capacitance Tolerance
Leakage Current
-55 to +105℃
25 & 35Vdc
2,500 to 14,000µF
0 to +30% (A)
I=0.01CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Rated voltage (Vdc)
25V 35V
tanδ (Max.)
0.20 0.16
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
Rated voltage (Vdc)
25V 35V
Z(-55℃)/Z(+20℃)
3
3
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
(at 20℃, 120Hz)
(at 20℃, 120Hz)
(at 20℃ after 2 minutes)
(at 20℃, 120Hz)
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃.
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
Endurance
Shelf Life
◆DIMENSIONS [mm]
Code : E
18
φD 16
φd 0.8 0.8
7.5 7.5
F
φD' φD+0.5max.
L' L+1.5max.
φD'
φd
Sleeve (PET : Dark blue)
F±0.5
●Terminal
L'
Vent
15min.
4min.
Gas escape end seal
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
E L BK AAA E AA AAA A AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 3,500µF:352, 14,000µF:143)
Lead forming·taping code
Terminal code
Voltage code (ex. 25V:250, 35V:350)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
224
CAT. No. E1001Q
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
For airbag module, 105℃
LBKSeries
◆STANDARD RATINGS
Cap
(μF)
WV
(Vdc)
35
20℃
16 × 20
18 × 20
16 × 25
18 × 25
16 × 31.5
16 × 35.5
18 × 31.5
16 × 40
18 × 35.5
18 × 40
16 × 20
18 × 20
16 × 25
18 × 25
16 × 31.5
16 × 35.5
18 × 31.5
16 × 40
18 × 35.5
18 × 40
4,200
5,300
5,900
7,500
8,000
9,500
10,000
11,000
11,000
14,000
2,500
3,100
3,500
4,500
4,700
5,600
6,000
6,600
7,100
8,400
25
ESR (Ω max./100kHz)
Case size
φD×L (mm)
-40℃
0.033
0.029
0.024
0.022
0.021
0.019
0.019
0.017
0.017
0.015
0.033
0.029
0.024
0.022
0.021
0.019
0.019
0.017
0.017
0.015
0.095
0.082
0.073
0.063
0.052
0.046
0.045
0.040
0.040
0.035
0.095
0.082
0.073
0.063
0.052
0.046
0.045
0.040
0.040
0.035
Rated ripple current
(mArms/105℃, 100kHz)
2,250
2,500
2,600
2,800
3,200
3,500
3,500
3,800
3,700
4,000
2,250
2,500
2,600
2,800
3,200
3,500
3,500
3,800
3,700
4,000
Part No.
ELBK250E□□422AL20S
ELBK250E□□532AM20S
ELBK250E□□592AL25S
ELBK250E□□752AM25S
ELBK250E□□802ALN3S
ELBK250E□□952ALP1S
ELBK250E□□103AMN3S
ELBK250E□□113AL40S
ELBK250E□□113AMP1S
ELBK250E□□143AM40S
ELBK350E□□252AL20S
ELBK350E□□312AM20S
ELBK350E□□352AL25S
ELBK350E□□452AM25S
ELBK350E□□472ALN3S
ELBK350E□□562ALP1S
ELBK350E□□602AMN3S
ELBK350E□□662AL40S
ELBK350E□□712AMP1S
ELBK350E□□842AM40S
□□ : Enter the appropriate lead forming or taping code.
◆RATED RIPPLE CURRENT MULTIPLIERS
・Frequency Multipliers
Capacitance(µF)
Frequency(Hz)
2,500 to 3,500
4,200 to 14,000
120
0.75
0.85
1k
0.90
0.95
10k
0.95
0.98
100k
1.00
1.00
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
225
CAT. No. E1001Q
Similar pages